: Please pull u-boot-imx

Hi Albert,

still a couple of patches for the release. Please pull from u-boot-imx, thanks !

The following changes since commit a6bbee66197759f790de83181924bf1d2cf482b2:

mx6slevk: Include "mx6_common.h" (2014-01-13 11:52:28 +0100)

are available in the git repository at:

git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 3a21773129f6ef218f1978d05a1a5d5cf6801ab6:

mx6: Add initial support for the Hummingboard solo (2014-01-15
10:33:25 +0100)

----------------------------------------------------------------
Fabio Estevam (2):
mx6: clock: Pass the frequency as argument of
enable_fec_anatop_clock()
mx6: Add initial support for the Hummingboard solo

 arch/arm/cpu/armv7/mx6/clock.c                     |    8 +-
 arch/arm/include/asm/arch-mx6/clock.h              |    9 +-
 arch/arm/include/asm/arch-mx6/imx-regs.h           |    4 +
 board/freescale/mx6slevk/mx6slevk.c                |    2 +-
 board/solidrun/hummingboard/Makefile               |    9 +
 board/solidrun/hummingboard/README                 |   40 ++++
 board/solidrun/hummingboard/hummingboard.c         |  187 ++++++++++++++++
 board/solidrun/hummingboard/solo.cfg               |   25 +++
 board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg   |   74 +++++++
 board/solidrun/mx6-microsom/clocks.cfg             |   33 +++
 .../mx6-microsom/ddr-800mhz-32bit-setup.cfg        |   76 +++++++
 boards.cfg                                         |    1 +
 include/configs/hummingboard.h                     |  226
++++++++++++++++++++
 13 files changed, 691 insertions(+), 3 deletions(-)
 create mode 100644 board/solidrun/hummingboard/Makefile
 create mode 100644 board/solidrun/hummingboard/README
 create mode 100644 board/solidrun/hummingboard/hummingboard.c
 create mode 100644 board/solidrun/hummingboard/solo.cfg
 create mode 100644 board/solidrun/mx6-microsom/800mhz_2x128mx16.cfg
 create mode 100644 board/solidrun/mx6-microsom/clocks.cfg
 create mode 100644 board/solidrun/mx6-microsom/ddr-800mhz-32bit-setup.cfg
 create mode 100644 include/configs/hummingboard.h

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

Hi Stefano,

Applied to u-boot-arm/master, thanks!

Amicalement,

Albert.