usb0 failure
I'm working with Simon's tree from 9th Jan with Valentin's patches as well as my own for FDT support and seeing the following failure for OHCI on channel0 failing to start. The other two channels are working fine.
The OHCI for channel 0 initialising:
Quoted 10 lines
ohci-pci 0000:00:01.0: enabling bus mastering
ohci-pci 0000:00:01.0: OHCI PCI host controller
ohci-pci 0000:00:01.0: new USB bus registered, assigned bus number 4 ohci-pci 0000:00:01.0: irq 143, io mem0xee080000ohci-pci 0000:00:01.0: init err (00002edf0000)
ohci-pci 0000:00:01.0: can't start
ohci-pci 0000:00:01.0: startup error -75
ohci-pci 0000:00:01.0: USB bus 4 deregistered
ohci-pci 0000:00:01.0: init 0000:00:01.0 fail, -75
ohci-pci: probe of 0000:00:01.0 failed with error -75
For ref, the EHCI block for 0
Quoted 5 lines
ehci-pci 0000:01:02.0: EHCI Host Controller
ehci-pci 0000:01:02.0: new USB bus registered, assigned bus number 2 ehci-pci 0000:01:02.0: enabling Mem-Wr-Inval
ehci-pci 0000:01:02.0: irq 144, io mem0xee0a1000ehci-pci 0000:01:02.0: USB 2.0 started, EHCI 1.00
Signature · 2 lines
Ben Dooks http://www.codethink.co.uk/ Senior Engineer Codethink - Providing Genius
Quoted 4 lines · Ben Dooks
I'm working with Simon's tree from 9th Jan with Valentin's patches as well as my own for FDT support and seeing the following failure for OHCI on channel0 failing to start. The other two channels are working fine.
I failed to mention that I was interested if anyone had seen the following error before. I /think/ it may be a bridge initialisation error as I've seen it on another architecture with badly configured security.
Quoted 22 lines
The OHCI for channel 0 initialising:
Quoted 10 lines
ohci-pci 0000:00:01.0: enabling bus mastering
ohci-pci 0000:00:01.0: OHCI PCI host controller
ohci-pci 0000:00:01.0: new USB bus registered, assigned bus number 4 ohci-pci 0000:00:01.0: irq 143, io mem0xee080000ohci-pci 0000:00:01.0: init err (00002edf0000)
ohci-pci 0000:00:01.0: can't start
ohci-pci 0000:00:01.0: startup error -75
ohci-pci 0000:00:01.0: USB bus 4 deregistered
ohci-pci 0000:00:01.0: init 0000:00:01.0 fail, -75
ohci-pci: probe of 0000:00:01.0 failed with error -75For ref, the EHCI block for 0
Quoted 5 lines
ehci-pci 0000:01:02.0: EHCI Host Controller
ehci-pci 0000:01:02.0: new USB bus registered, assigned bus number 2 ehci-pci 0000:01:02.0: enabling Mem-Wr-Inval
ehci-pci 0000:01:02.0: irq 144, io mem0xee0a1000ehci-pci 0000:01:02.0: USB 2.0 started, EHCI 1.00
Signature · 2 lines
Ben Dooks http://www.codethink.co.uk/ Senior Engineer Codethink - Providing Genius