Skip to contentSkip to conversation

Anyone done long term testing?

DISCUSSION Ben Greear 3 participants 5 messages Jan 24, 2014 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore

Ben Greear

author
#0 lore raw

I left an ath10k system up overnight, running 128kbps traffic on each of 32 stations, and by morning, the machine was OOM.

Just curious if anyone had done overnight traffic runs with any luck?

Thanks,
Ben

Signature · 8 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#1 lore raw
Quoted 4 lines · Ben Greear

I left an ath10k system up overnight, running 128kbps traffic on each of 32 stations, and by morning, the machine was OOM.

Just curious if anyone had done overnight traffic runs with any luck?

I am planning a truly abusive period for the ath10k starting next month. Will start
tonight. I can't quite scale to the same number of stations as you can, but can certainly pump a few gb through what I got on a regular basis.

Quoted 13 lines

Thanks,
Ben

--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

Signature · 8 lines
Dave Täht

Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#2 lore raw
In reply to Ben Greear
Quoted 2 lines · Ben Greear

I left an ath10k system up overnight, running 128kbps traffic on each of 32 stations, and by morning, the machine was OOM.

Did you see SWBA overrun warnings before the OOM? I saw one report of such issue. This patch should help with that:

748afc4 ath10k: implement and use new beacon method

Quoted 1 line

Just curious if anyone had done overnight traffic runs with any luck?

I'm running our AP135 board with ath9k+ath10k as my main AP and have seen SWBA overruns few times, otherwise it has been pretty stable. But I haven't yet tested with the patch above to see if the SWBA overruns are really gone.

Signature · 6 lines
Kalle Valo

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
author
#3 lore raw
Quoted 8 lines · Kalle Valo
Quoted 2 lines · Ben Greear

I left an ath10k system up overnight, running 128kbps traffic on each of 32 stations, and by morning, the machine was OOM.

Did you see SWBA overrun warnings before the OOM? I saw one report of such issue. This patch should help with that:

Quoted 8 lines

748afc4 ath10k: implement and use new beacon method

Quoted 1 line

Just curious if anyone had done overnight traffic runs with any luck?

I'm running our AP135 board with ath9k+ath10k as my main AP and have seen SWBA overruns few times, otherwise it has been pretty stable. But I haven't yet tested with the patch above to see if the SWBA overruns are really gone.

I didn't notice any SWBA warnings, but perhaps they were there. I'll keep a look out for them if it happens again.

I'm also running in station mode, with lots of station vifs, so might be hitting some issue specific to that. I guess in station mode I shouldn't be sending any beacons anyway, so probably not the beacon issue.

I'll update to latest to pull in that beacon patch and continue testing.

Thanks,
Ben

Signature · 8 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#4 lore raw
Quoted 18 lines · Ben Greear
Quoted 8 lines · Kalle Valo
Quoted 2 lines · Ben Greear

I left an ath10k system up overnight, running 128kbps traffic on each of 32 stations, and by morning, the machine was OOM.

Did you see SWBA overrun warnings before the OOM? I saw one report of such issue. This patch should help with that:

Quoted 8 lines

748afc4 ath10k: implement and use new beacon method

Quoted 1 line

Just curious if anyone had done overnight traffic runs with any luck?

I'm running our AP135 board with ath9k+ath10k as my main AP and have seen SWBA overruns few times, otherwise it has been pretty stable. But I haven't yet tested with the patch above to see if the SWBA overruns are really gone.

Quoted 6 lines

I didn't notice any SWBA warnings, but perhaps they were there. I'll keep a look out for them if it happens again.

I'm also running in station mode, with lots of station vifs, so might be hitting some issue specific to that. I guess in station mode I shouldn't be sending any beacons anyway, so probably not the beacon issue.

Heh, I didn't realise that you were using station mode. Then most likely you are seeing something else.

Signature · 6 lines
Kalle Valo

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k