Skip to contentSkip to conversation

mmc: dw_mmc: use the mmc_of_parse() instead of local parser

PATCH In review Jaehoon Chung 1 participant 1 message Feb 3, 2014

Subsystems (3)
Device tree bindings MMC, SD and SDIO Synopsys DesignWare MMC/SD/SDIO driver
lore
Share & tools
lore

Jaehoon Chung

author maintainer
#0 lore raw

PATCH v3 2/8 mmc: dw_mmc: use the mmc_of_parse() instead of local parser

mmc_of_parse() have been already parsed the general capability. Didn't need to use the local parser.

Signed-off-by Jaehoon Chung <[email protected]>

---
Changelog V3:
- Remove the caps2-mmc-hs-1_8v/1_2v into synopsys-dw-mshc.txt
Changelog V2:
- None

 .../devicetree/bindings/mmc/synopsys-dw-mshc.txt   |    5 --
 drivers/mmc/host/dw_mmc.c                          |   49 +-------------------
 2 files changed, 1 insertion(+), 53 deletions(-)
Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +0 -5
index 8f3f133..2d4a725 100644
@@ -69,10 +69,6 @@ Optional properties:
 
 * supports-highspeed: Enables support for high speed cards (up to 50MHz)
 
-* caps2-mmc-hs200-1_8v: Supports mmc HS200 SDR 1.8V mode
-
-* caps2-mmc-hs200-1_2v: Supports mmc HS200 SDR 1.2V mode
-
 * broken-cd: as documented in mmc core bindings.
 
 * vmmc-supply: The phandle to the regulator to use for vmmc.  If this is

@@ -103,7 +99,6 @@ board specific portions as listed below.
 		clock-freq-min-max = <400000 200000000>;
 		num-slots = <1>;
 		supports-highspeed;
-		caps2-mmc-hs200-1_8v;
 		broken-cd;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
drivers/mmc/host/dw_mmc.c +1 -48

82 lines not on this page · raw message

Signature · 1 line
1.7.9.5