iio for the end user
Hi there,
I have been working towards getting something together which allows the end user to use IIO with 'standard applications' and also support network connectivity. I have a set of ADCs running using IIO at the moment, so I am focussing on input. I am aware that this paradigm may fall over for very high sample rates, but for lower sample rates, of the order of 1 MHz, it should work.
I am writing to this list to find out if there are other networkable approaches in linking iio into other existing protocols/software which would suit the end user ? I am new to this list and didn't find much in the archives, however perhaps I missed something ?
My first attempt for user space IIO is to use Jack and integrate iio into Jack as a driver. I have successfully created this iio driver for jack [1] and I can get the driver to run with very low latencies. The best spec. without overruns is : 4 channels at 1MHz with mmap block sizes of 256 samples using 3 periods ... thats roughly 0.75 ms maximum latency at the jack driver level. The current stage of development is to connect a jack client to this new iio driver and I am in the stage of debugging that work.
thanks
Matt
[1] https://github.com/flatmax/jack1
Hi again,
I would like to ask a second time.
Are there any end user systems which support IIO ?
If not then are there any efforts for a networking protocol/library/API for IIO streaming ? Particularly interested in multi device input streaming at this point in time.
I have been working further on the jack IIO driver, however it seems that the concept of getting such high sample rates running on embedded cores may prove to challenging for audio subsystems. Whilst reading in the jack 'driver' space is ok, connecting clients to the 'driver' is difficult when trying to keep up with the higher then traditional audio sample rates.
thanks
Matt
Quoted 17 lines · Matt Flax
Hi there,
I have been working towards getting something together which allows the end user to use IIO with 'standard applications' and also support network connectivity. I have a set of ADCs running using IIO at the moment, so I am focussing on input. I am aware that this paradigm may fall over for very high sample rates, but for lower sample rates, of the order of 1 MHz, it should work.
I am writing to this list to find out if there are other networkable approaches in linking iio into other existing protocols/software which would suit the end user ? I am new to this list and didn't find much in the archives, however perhaps I missed something ?
My first attempt for user space IIO is to use Jack and integrate iio into Jack as a driver. I have successfully created this iio driver for jack [1] and I can get the driver to run with very low latencies. The best spec. without overruns is : 4 channels at 1MHz with mmap block sizes of 256 samples using 3 periods ... thats roughly 0.75 ms maximum latency at the jack driver level. The current stage of development is to connect a jack client to this new iio driver and I am in the stage of debugging that work.
thanks
Matt
[1] https://github.com/flatmax/jack1Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Matt,
these are the projects I'm aware of:
http://sourceforge.net/projects/iioutils/
https://wiki.analog.com/resources/tools-software/linux-software/iio_multi_plot_oscilloscope
https://wiki.analog.com/resources/tools-software/linux-software/iio_oscilloscope
https://wiki.analog.com/software/linux/docs/iio/iio_netscope
https://wiki.analog.com/resources/tools-software/linux-software/iio_cmdsrv
for iioutils I was planning to add a daemon much like gpsd for GPS devices.
Regards,
Manuel Stahl
Am Dienstag, 11. Februar 2014, 08:30:18 schrieb Matt Flax:
Quoted 53 lines
Hi again,
I would like to ask a second time.
Are there any end user systems which support IIO ?
If not then are there any efforts for a networking protocol/library/API for IIO streaming ? Particularly interested in multi device input streaming at this point in time.
I have been working further on the jack IIO driver, however it seems that the concept of getting such high sample rates running on embedded cores may prove to challenging for audio subsystems. Whilst reading in the jack 'driver' space is ok, connecting clients to the 'driver' is difficult when trying to keep up with the higher then traditional audio sample rates.
thanks
MattQuoted 23 lines · Matt Flax
Hi there,
I have been working towards getting something together which allows the end user to use IIO with 'standard applications' and also support network connectivity. I have a set of ADCs running using IIO at the moment, so I am focussing on input. I am aware that this paradigm may fall over for very high sample rates, but for lower sample rates, of the order of 1 MHz, it should work.
I am writing to this list to find out if there are other networkable approaches in linking iio into other existing protocols/software which would suit the end user ? I am new to this list and didn't find much in the archives, however perhaps I missed something ?
My first attempt for user space IIO is to use Jack and integrate iio into Jack as a driver. I have successfully created this iio driver for jack [1] and I can get the driver to run with very low latencies. The best spec. without overruns is : 4 channels at 1MHz with mmap block sizes of 256 samples using 3 periods ... thats roughly 0.75 ms maximum latency at the jack driver level.
The current stage of development is to connect a jack client to this new iio driver and I am in the stage of debugging that work.Quoted 3 lines
thanks
Matt
[1] https://github.com/flatmax/jack1--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html