PCI: Annotate pci_cache_line_size variables as __ro_after_init
PATCH v2 1/1 PCI: Annotate pci_cache_line_size variables as __ro_after_init
Annotate both variables as __ro_after_init, enforcing that they can't be changed after the init phase.
Signed-off-by Heiner Kallweit <[email protected]>
---
v2:
- remove annotation from extern declaration in pci.h
--- drivers/pci/pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/pci/pci.c +2 -2
@@ -142,8 +142,8 @@ enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_DEFAULT;* the dfl or actual value as it sees fit. Don't forget this is * measured in 32-bit words, not bytes. */ -u8 pci_dfl_cache_line_size =L1_CACHE_BYTES >>2 ; -u8 pci_cache_line_size; +u8 pci_dfl_cache_line_size__ro_after_init =L1_CACHE_BYTES >>2 ; +u8 pci_cache_line_size__ro_after_init ;/* * If we set up a device for bus mastering, we need to check the latency
Signature · 1 line
2.44.0
Bjorn Helgaas
AppliedQuoted 4 lines · Heiner Kallweit
Annotate both variables as
__ro_after_init, enforcing that they can't be changed after the init phase.Signed-off-by Heiner Kallweit <[email protected]>
Applied to pci/misc for v6.10, thanks!
Quoted 24 lines
---
v2:
- remove annotation from extern declaration inpci.h--- drivers/pci/pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/pci/pci.c +2
-2@@ -142,8 +142,8 @@ enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_DEFAULT;* the dfl or actual value as it sees fit. Don't forget this is * measured in 32-bit words, not bytes. */ -u8 pci_dfl_cache_line_size =L1_CACHE_BYTES >>2 ; -u8 pci_cache_line_size; +u8 pci_dfl_cache_line_size__ro_after_init =L1_CACHE_BYTES >>2 ; +u8 pci_cache_line_size__ro_after_init ;/* * If we set up a device for bus mastering, we need to check the latency Signature · 1 line
2.44.0