i915 KMS interferes with nVidia card
Greetings,
Sorry if I'm violating list etiquette in any way--the readme link to intellinuxgraphics.org no longer works.
My hardware:
Asrock Z77 Extreme4 with iGPU Multi-Monitor enabled. Primary graphics is set to PCIe but that doesn't make a difference. i7 3770k / HD 4000
nVidia GTX 660 running nVidia's binary drivers v334.21, although multiple versions have the issue
My software:
Stable Gentoo with gentoo-sources-3.12.13, although multiple kernels have the issue
I am trying to use both the HD 4000 graphics and the nVidia card simultaneously in a single-seat multiple-X-server Zaphod scenario. I have another cheap nVidia card on order so I don't have any urgent need and maybe not any need at all to get this working with i915.
The Zaphod setup works fine with the exception of two problems that occur only when the i915 driver is loaded with modesetting enabled. I.e., not loading i915 or setting "nomodeset" or "i915.modeset=0" at boot resolves the issue, but does not allow the HD 4000 to be used. With i915 loaded normally:
1) The nVidia virtual terminals are messed up. They appear zoomed-in and don't update.
2) The nVidia card does not resume correctly from suspend-to-ram. It prints some errors to dmesg and either doesn't wake the monitor up, or doesn't ever show the X session again until I reboot.
I am a C programmer and I don't mind helping to fix this if it turns out to be relatively simple issue and my help is desired. Is this a known limitation, and does anyone have a clear idea what the problem is or where to look?
Thanks,
-Ben Johnson
Quoted 2 lines · Ben Johnson
Sorry if I'm violating list etiquette in any way--the readme link to intellinuxgraphics.org no longer works.
Thanks for letting us know. Better now?
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 28 lines
My hardware:
Asrock Z77 Extreme4 with iGPU Multi-Monitor enabled. Primary graphics is set to PCIe but that doesn't make a difference.
i7 3770k / HD 4000
nVidia GTX 660 running nVidia's binary drivers v334.21, although multiple versions have the issueMy software:
Stable Gentoo with gentoo-sources-3.12.13, although multiple kernels have the issueI am trying to use both the HD 4000 graphics and the nVidia card simultaneously in a single-seat multiple-X-server Zaphod scenario. I have another cheap nVidia card on order so I don't have any urgent need and maybe not any need at all to get this working with i915.
The Zaphod setup works fine with the exception of two problems that occur only when the i915 driver is loaded with modesetting enabled. I.e., not loading i915 or setting "nomodeset" or "i915.modeset=0" at boot resolves the issue, but does not allow the HD 4000 to be used. With i915 loaded normally:
1) The nVidia virtual terminals are messed up. They appear zoomed-in and don't update.
2) The nVidia card does not resume correctly from suspend-to-ram. It prints some errors to dmesg and either doesn't wake the monitor up, or doesn't ever show the X session again until I reboot.
Quoted 4 lines
I am a C programmer and I don't mind helping to fix this if it turns out to be relatively simple issue and my help is desired. Is this a known limitation, and does anyone have a clear idea what the problem is or where to look?
I don't have any ideas off the top of my head, maybe others do. However you should expect problems reproducible only with closed source binary drivers to have a relatively low priority.
BR,
Jani.
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Quoted 28 lines · On Wed, 12 March 2014 Ben Johnson <[email protected]> wrote:
My hardware:
Asrock Z77 Extreme4 with iGPU Multi-Monitor enabled. Primary graphics is set to PCIe but that doesn't make a difference.
i7 3770k / HD 4000
nVidia GTX 660 running nVidia's binary drivers v334.21, although multiple versions have the issueMy software:
Stable Gentoo with gentoo-sources-3.12.13, although multiple kernels have the issueI am trying to use both the HD 4000 graphics and the nVidia card simultaneously in a single-seat multiple-X-server Zaphod scenario. I have another cheap nVidia card on order so I don't have any urgent need and maybe not any need at all to get this working with i915.
The Zaphod setup works fine with the exception of two problems that occur only when the i915 driver is loaded with modesetting enabled. I.e., not loading i915 or setting "nomodeset" or "i915.modeset=0" at boot resolves the issue, but does not allow the HD 4000 to be used. With i915 loaded normally:
1) The nVidia virtual terminals are messed up. They appear zoomed-in and don't update.
2) The nVidia card does not resume correctly from suspend-to-ram. It prints some errors to dmesg and either doesn't wake the monitor up, or doesn't ever show the X session again until I reboot.
Quoted 4 lines
I am a C programmer and I don't mind helping to fix this if it turns out to be relatively simple issue and my help is desired. Is this a known limitation, and does anyone have a clear idea what the problem is or where to look?
Wild guess, maybe you would have some more chances of success if the nvidia was the GPU with active VGA bits (e.g. telling vga-arbitration to have nvidia card active/primary).
That way the nvidia blob would have best changes of living in a tested environment and i915 hopefully being able to do its work anyway.
Bruno
Quoted 9 lines · Bruno Prémont
Wild guess, maybe you would have some more chances of success if the nvidia was the GPU with active VGA bits (e.g. telling vga-arbitration to have nvidia card active/primary).
That way the nvidia blob would have best changes of living in a tested environment and i915 hopefully being able to do its work anyway.
Bruno
I read/skimmed Documentation/vgaarbiter.txt and googled for a while but it's not clear to me how to do what you are suggesting. Do you mean to write something to /dev/vga_arbiter? This is what it has with just the nvidia module loaded:
/ # head -n 1 /dev/vga_arbiter count:1,PCI:0000:01:00.0,decodes=none,owns=none,locks=none(0:0)
-Ben