asus-nb-wmi: set wapf=4 for ASUSTeK COMPUTER INC. X75VBP
Ahoy!
Need to set wapf to 4 for ASUSTeK COMPUTER INC. X75VBP, so that the device is enabled.
The corresponding /sys/class/dmi/id/* values via dmesg:
DMI: ASUSTeK COMPUTER INC. X75VBP/X75VBP, BIOS X75VBP.304 06/04/2013
Tested with WAPF values 0, 1 and 4.
The values 1 and 4 have the same effect regarding wireless network adapter enablement.
A value of 0 has no effect.
The corresponding command line:
Kernel command line: BOOT_IMAGE=/isolinux/vmlinuz0 root=live:LABEL=Fedora-Live-Xfce-x86_64-rawhide- ro rd.live.image selinux=0 biosdevname=0 asus-nb-wmi.wapf=4
rfkill list - vulgaris:
1: asus-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
2: asus-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
3: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
4: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
rfkill list - asus-nb-wmi.wapf=1,
asus-nb-wmi.wapf=4:
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
2: asus-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
3: asus-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
Regardless of the values of the WAPF parameter, <Fn><F2> key combination does not give any results, i.e. does not toggles The Internal Wireless LAN ON or OFF. Also the WLAN LED is always ON, no matter what.
poma
drivers/platform/x86/asus-nb-wmi.c +9 -0
@@ -182,6 +182,15 @@ static struct dmi_system_id asus_quirks[] = { }, { .callback = dmi_matched, + .ident = "ASUSTeK COMPUTER INC. X75VBP", + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"ASUSTeK COMPUTER INC." ), + DMI_MATCH(DMI_PRODUCT_NAME, "X75VBP"), + }, + .driver_data = &quirk_asus_x401u, + }, + { + .callback = dmi_matched, .ident = "ASUSTeK COMPUTER INC. 1015E", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),