Skip to contentSkip to conversation

Smart/RPM automatic feed configuration

DISCUSSION Alex J Lennon 1 participant 2 messages May 7, 2014

lore
Share & tools
lore
#0 lore raw

I'm using RPM package feeds with smart, and am wondering how to configure up the feed sources easily at build time?

I see in 3.4.5 of the reference manual it talks about base-feeds.conf for opkg but I'm wondering if there's a variable
I can set in local.conf to correct setup, say, the URL prefix for the needed feed sources for the image?

Thanks,

Alex

#1 lore raw
Quoted 7 lines · Alex J Lennon

I'm using RPM package feeds with smart, and am wondering how to configure up the feed sources easily at build time?

I see in 3.4.5 of the reference manual it talks about base-feeds.conf for opkg but I'm wondering if there's a variable
I can set in local.conf to correct setup, say, the URL prefix for the needed feed sources for the image?

I discovered FEED_DEPLOYDIR_BASE_URI in the reference manual glossary, with some notes on OPKG usage.

This looks ideal but it doesn't appear to be implemented yet for RPM? (as least setting that seems to have
no effect on my smart channels in a built image)

Alex