BUG: null ptr dereference in ichx_gpio_request_regions()
Peter Hurley
Acked-by Linus WalleijBooting 3.15-rc3, I get this BUG when loading gpio_ich:
BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa042339c>] ichx_gpio_probe+0x28c/0x3d0 [gpio_ich] usbcore: registered new interface driver btusb PGD 2b04aa067 PUD 2af912067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: gpio_ich(+) btusb bluetooth psmouse snd i5400_edac .... CPU: 3 PID: 1217 Comm: modprobe Not tainted 3.15.0-rc3+wip-xeon #rc3+wip Hardware name: Dell Inc. Precision WorkStation T5400 /0RW203, BIOS A11 04/30/2012 task: ffff8802ae8448f0 ti: ffff8802b0d74000 task.ti: ffff8802b0d74000 RIP: 0010:[<ffffffffa042339c>] [<ffffffffa042339c>] ichx_gpio_probe+0x28c/0x3d0 [gpio_ich] RSP: 0018:ffff8802b0d75b78 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000100 RDI: ffffffff81c378a0 RBP: ffff8802b0d75bb8 R08: 0000000000000000 R09: ffff880036a0e2c8 R10: 0000000000005dc0 R11: 8000000000000000 R12: ffff880036a0e000 R13: ffff8800bad62bc0 R14: 0000000000000003 R15: 0000000000000000 FS: 00007fb9d38fa700(0000) GS:ffff8802bfcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000002af445000 CR4: 00000000000007e0 Stack: ffff8802b0d75b98 ffff880036a0e010 ffff880036a0e020 ffff880036a0e010 ffffffffa0425028 ffffffffa0425028 0000000000000000 0000000000000001 ffff8802b0d75be8 ffffffff814793f2 ffff8802b0d75ca8 ffff880036a0e010 Call Trace: [<ffffffff814793f2>] platform_drv_probe+0x32/0x80 [<ffffffff8147784b>] driver_probe_device+0x8b/0x3a0 [<ffffffff81477c0b>] __driver_attach+0xab/0xb0 [<ffffffff81477b60>] ? driver_probe_device+0x3a0/0x3a0 [<ffffffff8147586d>] bus_for_each_dev+0x5d/0xa0 [<ffffffff8147727e>] driver_attach+0x1e/0x20 [<ffffffff81476dd4>] bus_add_driver+0x124/0x250 [<ffffffffa029a000>] ? 0xffffffffa0299fff [<ffffffff81478314>] driver_register+0x64/0xf0 [<ffffffffa029a000>] ? 0xffffffffa0299fff [<ffffffff8147926a>] __platform_driver_register+0x4a/0x50 [<ffffffffa029a017>] ichx_gpio_driver_init+0x17/0x1000 [gpio_ich] [<ffffffff8100032a>] do_one_initcall+0xda/0x180 [<ffffffff8103e733>] ? set_memory_nx+0x43/0x50 [<ffffffff816ffeec>] ? set_section_ro_nx+0x6d/0x75 [<ffffffff810cc9f9>] load_module+0x1d79/0x2770 [<ffffffff810c8690>] ? unset_module_init_ro_nx+0x80/0x80 [<ffffffff81172f80>] ? __vmalloc_node_range+0x170/0x250 [<ffffffff810cd479>] ? SyS_init_module+0x89/0x100 [<ffffffff810cd4a2>] SyS_init_module+0xb2/0x100 [<ffffffff81719ad2>] system_call_fastpath+0x16/0x1b Code: c7 05 fd 1f 00 00 40 51 42 a0 e9 00 fe ff ff 48 8b 05 f1 1f 00 00 45 31 c0 48 c7 c7 a0 78 c3 81 48 8b 48 08 48 8b 50 10 48 63 c3 <0f> b6 34 01 4c 89 c9 0f b6 14 1a 49 03 75 00 4c 89 4d c8 e8 ec RIP [<ffffffffa042339c>] ichx_gpio_probe+0x28c/0x3d0 [gpio_ich] RSP <ffff8802b0d75b78> CR2: 0000000000000000
This is almost certainly caused by the uninitialized regs ptr in the ich6_desc struct (i3100_desc struct has the same problem) introduced in this commit:
commit bb62a35bd5d96e506af0ea8dd145480b9172a2a6
Author: Vincent Donnefort <[email protected]> Date: Fri Feb 14 15:01:56 2014 +0100
gpio: ich: Add support for multiple register addresses
This patch introduces regs and reglen pointers which allow a chipset to have register addresses differing from ICH ones.
The relevant excerpts from the mixed listing are:
0000000000000110 <ichx_gpio_probe>:
<...snip...>
for (i = 0; i < ARRAY_SIZE(ichx_priv.desc->regs[0]); i++) {
if (!(use_gpio & (1 << i)))
continue;
if (!request_region(
380: 48 8b 05 00 00 00 00 mov 0x0(%rip),%rax # 387 <ichx_gpio_probe+0x277>
383: R_X86_64_PC32 .bss+0xb4
387: 45 31 c0 xor %r8d,%r8d
38a: 48 c7 c7 00 00 00 00 mov $0x0,%rdi
38d: R_X86_64_32S ioport_resource
391: 48 8b 48 08 mov 0x8(%rax),%rcx
395: 48 8b 50 10 mov 0x10(%rax),%rdx
399: 48 63 c3 movslq %ebx,%rax
39c: 0f b6 34 01 movzbl (%rcx,%rax,1),%esi <===== FAULTING INSTN
3a0: 4c 89 c9 mov %r9,%rcx
3a3: 0f b6 14 1a movzbl (%rdx,%rbx,1),%edx
3a7: 49 03 75 00 add 0x0(%r13),%rsi
3ab: 4c 89 4d c8 mov %r9,-0x38(%rbp)
3af: e8 00 00 00 00 callq 3b4 <ichx_gpio_probe+0x2a4>
3b0: R_X86_64_PC32 __request_region-0x4
3b4: 4c 8b 4d c8 mov -0x38(%rbp),%r9
3b8: 48 85 c0 test %rax,%rax
3bb: 0f 85 17 fe ff ff jne 1d8 <ichx_gpio_probe+0xc8>
}
return 0;request_err:
/* Clean up: release already requested regions, if any */
for (i--; i >= 0; i--) {
3c1: 41 83 ef 01 sub $0x1,%r15d
3c5: 41 83 ff ff cmp $0xffffffff,%r15d
3c9: 0f 84 d1 00 00 00 je 4a0 <ichx_gpio_probe+0x390>
if (!(use_gpio & (1 << i)))
3cf: 45 0f a3 fe bt %r15d,%r14d
3d3: 73 ec jae 3c1 <ichx_gpio_probe+0x2b1>Regards,
Peter Hurley
Hello Peter,
Quoted 61 lines · Peter Hurley
Booting 3.15-rc3, I get this BUG when loading
gpio_ich:BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa042339c>] ichx_gpio_probe+0x28c/0x3d0 [gpio_ich] usbcore: registered new interface driver btusb PGD 2b04aa067 PUD 2af912067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: gpio_ich(+) btusb bluetooth psmouse snd i5400_edac .... CPU: 3 PID: 1217 Comm: modprobe Not tainted 3.15.0-rc3+wip-xeon #rc3+wip Hardware name: Dell Inc. Precision WorkStation T5400 /0RW203, BIOS A11 04/30/2012 task: ffff8802ae8448f0 ti: ffff8802b0d74000 task.ti: ffff8802b0d74000 RIP: 0010:[<ffffffffa042339c>] [<ffffffffa042339c>] ichx_gpio_probe+0x28c/0x3d0 [gpio_ich] RSP: 0018:ffff8802b0d75b78 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000100 RDI: ffffffff81c378a0 RBP: ffff8802b0d75bb8 R08: 0000000000000000 R09: ffff880036a0e2c8 R10: 0000000000005dc0 R11: 8000000000000000 R12: ffff880036a0e000 R13: ffff8800bad62bc0 R14: 0000000000000003 R15: 0000000000000000 FS: 00007fb9d38fa700(0000) GS:ffff8802bfcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000002af445000 CR4: 00000000000007e0 Stack: ffff8802b0d75b98 ffff880036a0e010 ffff880036a0e020 ffff880036a0e010 ffffffffa0425028 ffffffffa0425028 0000000000000000 0000000000000001 ffff8802b0d75be8 ffffffff814793f2 ffff8802b0d75ca8 ffff880036a0e010 Call Trace: [<ffffffff814793f2>] platform_drv_probe+0x32/0x80 [<ffffffff8147784b>] driver_probe_device+0x8b/0x3a0 [<ffffffff81477c0b>] __driver_attach+0xab/0xb0 [<ffffffff81477b60>] ? driver_probe_device+0x3a0/0x3a0 [<ffffffff8147586d>] bus_for_each_dev+0x5d/0xa0 [<ffffffff8147727e>] driver_attach+0x1e/0x20 [<ffffffff81476dd4>] bus_add_driver+0x124/0x250 [<ffffffffa029a000>] ? 0xffffffffa0299fff [<ffffffff81478314>] driver_register+0x64/0xf0 [<ffffffffa029a000>] ? 0xffffffffa0299fff [<ffffffff8147926a>] __platform_driver_register+0x4a/0x50 [<ffffffffa029a017>] ichx_gpio_driver_init+0x17/0x1000 [gpio_ich] [<ffffffff8100032a>] do_one_initcall+0xda/0x180 [<ffffffff8103e733>] ? set_memory_nx+0x43/0x50 [<ffffffff816ffeec>] ? set_section_ro_nx+0x6d/0x75 [<ffffffff810cc9f9>] load_module+0x1d79/0x2770 [<ffffffff810c8690>] ? unset_module_init_ro_nx+0x80/0x80 [<ffffffff81172f80>] ? __vmalloc_node_range+0x170/0x250 [<ffffffff810cd479>] ? SyS_init_module+0x89/0x100 [<ffffffff810cd4a2>] SyS_init_module+0xb2/0x100 [<ffffffff81719ad2>] system_call_fastpath+0x16/0x1b Code: c7 05 fd 1f 00 00 40 51 42 a0 e9 00 fe ff ff 48 8b 05 f1 1f 00 00 45 31 c0 48 c7 c7 a0 78 c3 81 48 8b 48 08 48 8b 50 10 48 63 c3 <0f> b6 34 01 4c 89 c9 0f b6 14 1a 49 03 75 00 4c 89 4d c8 e8 ec RIP [<ffffffffa042339c>] ichx_gpio_probe+0x28c/0x3d0 [gpio_ich] RSP <ffff8802b0d75b78> CR2: 0000000000000000This is almost certainly caused by the uninitialized regs ptr in the
ich6_descstruct (i3100_descstruct has the same problem) introduced in this commit:commit
bb62a35bd5d96e506af0ea8dd145480b9172a2a6Author: Vincent Donnefort <[email protected]> Date: Fri Feb 14 15:01:56 2014 +0100
Quoted 9 lines
gpio: ich: Add support for multiple register addresses
This patch introduces regs and reglen pointers which allow a chipset to have register addresses differing from ICH ones.
Acked-by Linus Walleij <[email protected]>Signed-off-by Vincent Donnefort <[email protected]>Signed-off-by Lee Jones <[email protected]>
Yes indeed, this must be linked to this thread https://lkml.org/lkml/2014/4/15/292
Regards,
Vincent.
Quoted 45 lines
The relevant excerpts from the mixed listing are:
0000000000000110 <
ichx_gpio_probe>:<...snip...>
for (i = 0; i < ARRAY_SIZE(ichx_priv.desc->regs[0]); i++) { if (!(use_gpio & (1 << i))) continue; if (!request_region( 380: 48 8b 05 00 00 00 00 mov 0x0(%rip),%rax # 387 <ichx_gpio_probe+0x277> 383: R_X86_64_PC32 .bss+0xb4 387: 45 31 c0 xor %r8d,%r8d 38a: 48 c7 c7 00 00 00 00 mov $0x0,%rdi 38d: R_X86_64_32S ioport_resource 391: 48 8b 48 08 mov 0x8(%rax),%rcx 395: 48 8b 50 10 mov 0x10(%rax),%rdx 399: 48 63 c3 movslq %ebx,%rax 39c: 0f b6 34 01 movzbl (%rcx,%rax,1),%esi <===== FAULTING INSTN 3a0: 4c 89 c9 mov %r9,%rcx 3a3: 0f b6 14 1a movzbl (%rdx,%rbx,1),%edx 3a7: 49 03 75 00 add 0x0(%r13),%rsi 3ab: 4c 89 4d c8 mov %r9,-0x38(%rbp) 3af: e8 00 00 00 00 callq 3b4 <ichx_gpio_probe+0x2a4> 3b0: R_X86_64_PC32 __request_region-0x4 3b4: 4c 8b 4d c8 mov -0x38(%rbp),%r9 3b8: 48 85 c0 test %rax,%rax 3bb: 0f 85 17 fe ff ff jne 1d8 <ichx_gpio_probe+0xc8> } return 0;
request_err:/* Clean up: release already requested regions, if any */ for (i--; i >= 0; i--) { 3c1: 41 83 ef 01 sub $0x1,%r15d 3c5: 41 83 ff ff cmp $0xffffffff,%r15d 3c9: 0f 84 d1 00 00 00 je 4a0 <ichx_gpio_probe+0x390> if (!(use_gpio & (1 << i))) 3cf: 45 0f a3 fe bt %r15d,%r14d 3d3: 73 ec jae 3c1 <ichx_gpio_probe+0x2b1>Regards,
Peter Hurley
Hi Vincent,
Quoted 15 lines · Vincent Donnefort
Hello Peter,
Quoted 13 lines
This is almost certainly caused by the uninitialized regs ptr in the
ich6_descstruct (i3100_descstruct has the same problem) introduced in this commit:commit
bb62a35bd5d96e506af0ea8dd145480b9172a2a6Author: Vincent Donnefort <[email protected]> Date: Fri Feb 14 15:01:56 2014 +0100gpio: ich: Add support for multiple register addresses
This patch introduces regs and reglen pointers which allow a chipset to have register addresses differing from ICH ones.
Quoted 6 lines
Quoted 4 lines
Acked-by Linus Walleij <[email protected]>Signed-off-by Vincent Donnefort <[email protected]>Signed-off-by Lee Jones <[email protected]>Yes indeed, this must be linked to this thread https://lkml.org/lkml/2014/4/15/292
Thanks for the link.
I searched through LKML but without the driver name or the offending function in the commit message I couldn't find it.
Linus,
What tree is this bug fix trapped in? I see it didn't make -rc4 either.
Regards,
Peter Hurley
Quoted 32 lines · Peter Hurley
Hi Vincent,
Quoted 18 lines · Vincent Donnefort
Hello Peter,
Quoted 14 lines
This is almost certainly caused by the uninitialized regs ptr in the
ich6_descstruct (i3100_descstruct has the same problem) introduced in this commit:commit
bb62a35bd5d96e506af0ea8dd145480b9172a2a6Author: Vincent Donnefort <[email protected]> Date: Fri Feb 14 15:01:56 2014 +0100gpio: ich: Add support for multiple register addresses
This patch introduces regs and reglen pointers which allow a chipset
to have
register addresses differing from ICH ones.Quoted 7 lines
Quoted 4 lines
Acked-by Linus Walleij <[email protected]>Signed-off-by Vincent Donnefort <[email protected]>Signed-off-by Lee Jones <[email protected]>Yes indeed, this must be linked to this thread
https://lkml.org/lkml/2014/4/15/292Thanks for the link.
Quoted 7 lines
I searched through LKML but without the driver name or the offending function
in the commit message I couldn't find it.Linus,
What tree is this bug fix trapped in? I see it didn't make -rc4 either.
Since the last signoff is Lee I guess it's in the MFD tree?
Yours,
Linus Walleij
Quoted 37 lines · Linus Walleij
Quoted 36 lines · Peter Hurley
Hi Vincent,
Quoted 18 lines · Vincent Donnefort
Hello Peter,
Quoted 14 lines
This is almost certainly caused by the uninitialized regs ptr in the
ich6_descstruct (i3100_descstruct has the same problem) introduced in this commit:commit
bb62a35bd5d96e506af0ea8dd145480b9172a2a6Author: Vincent Donnefort <[email protected]> Date: Fri Feb 14 15:01:56 2014 +0100gpio: ich: Add support for multiple register addresses
This patch introduces regs and reglen pointers which allow a chipset
to have
register addresses differing from ICH ones.Quoted 7 lines
Quoted 4 lines
Acked-by Linus Walleij <[email protected]>Signed-off-by Vincent Donnefort <[email protected]>Signed-off-by Lee Jones <[email protected]>Yes indeed, this must be linked to this thread
https://lkml.org/lkml/2014/4/15/292Thanks for the link.
I searched through LKML but without the driver name or the offending function
in the commit message I couldn't find it.
Quoted 5 lines
Quoted 3 lines
Linus,
What tree is this bug fix trapped in? I see it didn't make -rc4 either.
Since the last signoff is Lee I guess it's in the MFD tree?
The commit above is the buggy commit. I don't have a commit id for the bug fix since I don't know what tree it's stuck in. Looking over Lee's tree, I don't see it.
Below is your signoff on LKML of the fix.
Quoted 11 lines · Linus Walleij
Quoted 7 lines · Vincent Donnefort
From: Vincent Donnefort <[email protected]>
This patch fixes kernel NULL pointer BUG introduced by the following commit:
b667cf488aa9476b0ab64acd91f2a96f188cfd21
gpio: ich: Add support for multiple register addresses.Signed-off-by Vincent Donnefort <[email protected]>Patch applied for fixes with Eric's tested-by tag.
Please expedite this fix as it has already missed -rc3 & -rc4.
Regards,
Peter Hurley
Quoted 37 lines · Linus Walleij
Quoted 36 lines · Peter Hurley
Hi Vincent,
Quoted 18 lines · Vincent Donnefort
Hello Peter,
Quoted 14 lines
This is almost certainly caused by the uninitialized regs ptr in the
ich6_descstruct (i3100_descstruct has the same problem) introduced in this commit:commit
bb62a35bd5d96e506af0ea8dd145480b9172a2a6Author: Vincent Donnefort <[email protected]> Date: Fri Feb 14 15:01:56 2014 +0100gpio: ich: Add support for multiple register addresses
This patch introduces regs and reglen pointers which allow a chipset
to have
register addresses differing from ICH ones.Quoted 7 lines
Quoted 4 lines
Acked-by Linus Walleij <[email protected]>Signed-off-by Vincent Donnefort <[email protected]>Signed-off-by Lee Jones <[email protected]>Yes indeed, this must be linked to this thread
https://lkml.org/lkml/2014/4/15/292Thanks for the link.
I searched through LKML but without the driver name or the offending function
in the commit message I couldn't find it.
Quoted 5 lines
Quoted 3 lines
Linus,
What tree is this bug fix trapped in? I see it didn't make -rc4 either.
Since the last signoff is Lee I guess it's in the MFD tree?
This patch is in Mainline.
Search for $SUBJECT.
Signature · 4 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
Quoted 41 lines · Lee Jones
Quoted 39 lines · Linus Walleij
Quoted 38 lines · Peter Hurley
Hi Vincent,
Quoted 18 lines · Vincent Donnefort
Hello Peter,
Quoted 14 lines
This is almost certainly caused by the uninitialized regs ptr in the
ich6_descstruct (i3100_descstruct has the same problem) introduced in this commit:commit
bb62a35bd5d96e506af0ea8dd145480b9172a2a6Author: Vincent Donnefort <[email protected]> Date: Fri Feb 14 15:01:56 2014 +0100gpio: ich: Add support for multiple register addresses
This patch introduces regs and reglen pointers which allow a chipset
to have
register addresses differing from ICH ones.Quoted 7 lines
Quoted 4 lines
Acked-by Linus Walleij <[email protected]>Signed-off-by Vincent Donnefort <[email protected]>Signed-off-by Lee Jones <[email protected]>Yes indeed, this must be linked to this thread
https://lkml.org/lkml/2014/4/15/292Thanks for the link.
I searched through LKML but without the driver name or the offending function
in the commit message I couldn't find it.Linus,
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
What tree is this bug fix trapped in? I see it didn't make -rc4 either.
Since the last signoff is Lee I guess it's in the MFD tree?
This patch is in Mainline.
Search for $SUBJECT.
Hmmm. Search for '[PATCH] gpio: ich: set regs and reglen for i3100 and ich6 chipset' (which is the bug fix for the buggy commit) turns up nothing in mainline.
This bug was reported on April 14 in -rc1 by Eric Paris here
http://lkml.iu.edu/hypermail/linux/kernel/1404.1/03833.html
and _fixed_ a day later on April 15 by Vincent Donnefort here
https://lkml.org/lkml/2014/4/15/292
It was signed off by Linus Walleij on the same day here
https://lkml.org/lkml/2014/4/22/1128
Since this bug fix never made it to mainline, I re-discovered the bug in -rc3 and reported it here
http://lists-archives.com/linux-kernel/28051348-bug-null-ptr-dereference-in-ichx_gpio_request_regions.html
(presumably, you received a copy of that email). Vincent replied with the link to the previous bug fix.
Since that time, I have been trying to find in which tree that bug fix is stuck, but I just keep getting replies which show an uncareful reading of this thread.
Regards,
Peter Hurley
Quoted 55 lines · Peter Hurley
Quoted 54 lines · Lee Jones
Quoted 49 lines · Linus Walleij
Quoted 37 lines · Peter Hurley
Hi Vincent,
Quoted 21 lines · Vincent Donnefort
Hello Peter,
Quoted 15 lines
This is almost certainly caused by the uninitialized regs ptr in the
ich6_descstruct (i3100_descstruct has the same problem) introduced in this commit:commit
bb62a35bd5d96e506af0ea8dd145480b9172a2a6Author: Vincent Donnefort <[email protected]> Date: Fri Feb 14 15:01:56 2014 +0100gpio: ich: Add support for multiple register addresses
This patch introduces regs and reglen pointers which allow a
chipset
to have
register addresses differing from ICH ones.Quoted 7 lines
Quoted 4 lines
Acked-by Linus Walleij <[email protected]>Signed-off-by Vincent Donnefort <[email protected]>Signed-off-by Lee Jones <[email protected]>Yes indeed, this must be linked to this thread
https://lkml.org/lkml/2014/4/15/292Thanks for the link.
Quoted 7 lines
I searched through LKML but without the driver name or the offending function
in the commit message I couldn't find it.Linus,
What tree is this bug fix trapped in? I see it didn't make -rc4 either.
Since the last signoff is Lee I guess it's in the MFD tree?
Quoted 8 lines
Quoted 3 lines
This patch is in Mainline.
Search for $SUBJECT.
Hmmm. Search for '[PATCH] gpio: ich: set regs and reglen for i3100 and ich6 chipset'
(which is the bug fix for the buggy commit) turns up nothing in mainline.
It's not in mainline (as you've found).
Quoted 6 lines
This bug was reported on April 14 in -rc1 by Eric Paris here
http://lkml.iu.edu/hypermail/linux/kernel/1404.1/03833.html
and _fixed_ a day later on April 15 by Vincent Donnefort here
https://lkml.org/lkml/2014/4/15/292
It was signed off by Linus Walleij on the same day here
https://lkml.org/lkml/2014/4/22/1128
To add to this, Fedora picked up the patch shortly after that as an add-on patch to 3.15-rcX. We are still carrying that separate patch on top of 3.15-rc4.
Quoted 5 lines
Since this bug fix never made it to mainline, I re-discovered the bug in -rc3 and reported it here
http://lists-archives.com/linux-kernel/28051348-bug-null-ptr-dereference-in-ichx_gpio_request_regions.html
(presumably, you received a copy of that email). Vincent replied with the link to the previous bug fix.
Right, still missing in -rc4.
Quoted 3 lines
Since that time, I have been trying to find in which tree that bug fix is stuck, but I just keep getting replies which show an uncareful reading of this thread.
Yep.
Someone please get this into the mainline tree.
josh
Quoted 5 lines · Josh Boyer
Quoted 3 lines
Hmmm. Search for '[PATCH] gpio: ich: set regs and reglen for i3100 and ich6 chipset'
(which is the bug fix for the buggy commit) turns up nothing in mainline.It's not in mainline (as you've found).
Has this been fixed now then? *I* can see it in mainline.
Yours,
Linus Walleij
Quoted 9 lines · Linus Walleij
Quoted 5 lines · Josh Boyer
Quoted 3 lines
Hmmm. Search for '[PATCH] gpio: ich: set regs and reglen for i3100 and ich6 chipset'
(which is the bug fix for the buggy commit) turns up nothing in mainline.It's not in mainline (as you've found).
Has this been fixed now then? *I* can see it in mainline.
Not that I can see as of this morning. I saw your pull request go to Linus that contains the fix, but he hasn't pulled it into mainline yet. So hopefully soon. Not sure where you're looking to already see it though.
josh
Quoted 7 lines · Josh Boyer
Quoted 6 lines · Linus Walleij
Quoted 4 lines · Josh Boyer
Quoted 3 lines
Hmmm. Search for '[PATCH] gpio: ich: set regs and reglen for i3100 and ich6 chipset'
(which is the bug fix for the buggy commit) turns up nothing in mainline.
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
It's not in mainline (as you've found).
Has this been fixed now then? *I* can see it in mainline.
Not that I can see as of this morning. I saw your pull request go to Linus that contains the fix, but he hasn't pulled it into mainline yet. So hopefully soon. Not sure where you're looking to already see it though.
Yeah well I'm confused. Hope the pull request will fix it, maybe something was missed somehow :-/
Yours,
Linus Walleij