ARM: dts: add device data for exynos4412-trats2
v3 cover ARM: dts: add device data for exynos4412-trats2
This patchset add some device node for exynos4412-trats2. It is based on v3.15-next/dt-samsung-2 branch.
exynos4412-trats2.dts
- Fix incorrect compatible. Compatible of AK8975 are "ak8975" or "asahi-kasei,ak8975".
- Add cm36651 light/proximity sensor device node.
- Change gpio-key device node. fix incorrect gpio property, and then add "ok-key" node.
Changes in v3:
- Patch set based on v3.16-next/dt-samsung
- ARM: dts: fix incorrect compatible for exynos4412 patch is applied.
- Remove device node property; status, interrupt-parent, interrupt
- Changes gpio/interrupt specified index.
Changes in v2:
- Change ak8975 magnetic sensor compatible according to binding document.
- Change cm36651 light/proximity sensor compatible according to binding document and driver.
Beomho Seo (2):
ARM: dts: add cm36651 light/proximity sensor node
ARM: dts: fixed gpio key node for exynos4412
arch/arm/boot/dts/exynos4412-trats2.dts | 46 +++++++++++++++++++++++++------ 1 file changed, 38 insertions(+), 8 deletions(-)
Signature · 1 line
1.7.9.5
Quoted 19 lines · Beomho Seo
This patchset add some device node for exynos4412-trats2. It is based on v3.15-next/dt-samsung-2 branch.
exynos4412-trats2.dts
- Fix incorrect compatible. Compatible of AK8975 are "ak8975" or "asahi-kasei,ak8975".
- Add cm36651 light/proximity sensor device node.
- Change gpio-key device node. fix incorrect gpio property, and then add "ok-key" node.Changes in v3:
- Patch set based on v3.16-next/dt-samsung
- ARM: dts: fix incorrect compatible for exynos4412 patch is applied.
- Remove device node property; status, interrupt-parent, interrupt
- Changes gpio/interrupt specified index.Changes in v2:
- Change ak8975 magnetic sensor compatible according to binding document.
- Change cm36651 light/proximity sensor compatible according to binding document and driver.
Quoted 7 lines
Beomho Seo (2):
ARM: dts: add cm36651 light/proximity sensor node
ARM: dts: fixed gpio key node for exynos4412arch/arm/boot/dts/exynos4412-trats2.dts | 46 +++++++++++++++++++++++++------ 1 file changed, 38 insertions(+), 8 deletions(-)
For the whole series:
Best regards,
Tomasz
Quoted 5 lines · Tomasz Figa
Quoted 3 lines · Beomho Seo
This patchset add some device node for exynos4412-trats2. It is based on v3.15-next/dt-samsung-2 branch.
Quoted 16 lines
Quoted 2 lines
exynos4412-trats2.dts
- Fix incorrect compatible. Compatible of AK8975 are "ak8975" or "asahi-kasei,ak8975".
Quoted 2 lines
- Add cm36651 light/proximity sensor device node.
- Change gpio-key device node. fix incorrect gpio property, and then add"ok-key" node.
Quoted 10 lines
Changes in v3:
- Patch set based on v3.16-next/dt-samsung
- ARM: dts: fix incorrect compatible for exynos4412 patch is applied.
- Remove device node property; status, interrupt-parent, interrupt
- Changes gpio/interrupt specified index.Changes in v2:
- Change ak8975 magnetic sensor compatible according to binding
document.
Quoted 7 lines
Quoted 1 line
- Change cm36651 light/proximity sensor compatible according to binding
document and driver.
Quoted 5 lines
Beomho Seo (2):
ARM: dts: add cm36651 light/proximity sensor node
ARM: dts: fixed gpio key node for exynos4412
Quoted 9 lines
Quoted 1 line
arch/arm/boot/dts/exynos4412-trats2.dts | 46+++++++++++++++++++++++++------
Quoted 2 lines
1 file changed, 38 insertions(+), 8 deletions(-)For the whole series:
Reviewed-by Tomasz Figa <[email protected]>
Looks good to me too except useless 2 empty line like following?
+ };
+
};
Will apply with removing them :-)
Thanks,
Kukjin