ml310 kernel2.6 booting problems
Thx for the answer
It's right, there is no /dev/console, but the MontaVista-Linux-kernel can = fully boot with this rootFS, how comes=3F
Doesn't matter, I was going to make my own RootFS anyway, so can you give = me an hint how I would
do this best=3F
I tried the Klingauf-Script (www.klingauf.com) with busybox, but I still h= ave no console in my /dev/ and it doesn't work.
I tried out buildroot, but I was a little overstrained with the configurat= ion and when I did "make" it aborted with an error message after a long time of working
Then I tried ELDK. I read that I could use the Directory "<install-dir>/pp= c=5F4xx/" as rootfs but when I go there and look inside=20
/dev I find only one entry:
prw------- 1 jogi jogi 0 2007-01-20 04:58 initctl
So this won't work, would it=3F
Which way would be the best for me to get an good RootFS easily=3F If the answer would be buildroot can you give me a short summary which set= tings are importent=3F
I read I can use my crosstool-Xcompiler, but I couldn't figure out how.=20
Greetings & Thx
Joachim
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
Erweitern Sie FreeMail zu einem noch leistungsst=E4rkeren E-Mail-Postfach! =09
Mehr Infos unter http://produkte.web.de/club/=3Fmc=3D021131
Quoted 3 lines · Joachim Meyer
Thx for the answer
It's right, there is no
/dev/console, but the MontaVista-Linux-kernel can fully boot with this rootFS, how comes?
hmmm, I don't know. The montavista kernel might be running a different binary as the init process. Compare the kernel parameter lines between the two.
Quoted 3 lines
Doesn't matter, I was going to make my own RootFS anyway, so can you give me an hint how I would
do this best?
I tried the Klingauf-Script (www.klingauf.com) with busybox, but I still have no console in my/dev/and it doesn't work.
Creating a console device is easy:
$ mknod /dev/console c 5 1
Quoted 6 lines
I tried out buildroot, but I was a little overstrained with the configuration and when I did "make" it aborted with an error message after a long time of working
Then I tried ELDK. I read that I could use the Directory "<install-dir>/ppc_4xx/" as rootfs but when I go there and look inside /dev I find only one entry:
prw------- 1 jogi jogi 0 2007-01-20 04:58 initctl
So this won't work, would it?
Looks like you haven't installed ELDK correctly. I recommend rereading the instructions and giving it another try. ELDK is a great starting point.
Quoted 3 lines
Which way would be the best for me to get an good RootFS easily?
If the answer would be buildroot can you give me a short summary which settings are importent?
Personally, I use buildroot, but you should start with ELDK to get things going.
Cheers,
g.
Signature · 2 lines
Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd.