ftdi_sio BUG: NULL pointer dereference
Subsystems (2)
Please CC me as not subscribed to list.
Third party device, with FTDI chip on it. Get this when plugging device in. Discovered in kernel 2.6.32, comparing ftdi_sio.c in 2.6.32 to latest 3.14 code is fundamentally unchanged. Crash looks to be occurring in ftdi_set_max_packet_size, at the point where priv->max_packet_size is being set off of ep_desc (about line 1503). It looks like ep_desc is probably NULL since priv should be nonzero (set in ftdi_sio_port_probe() which calls ftdi_set_max_packet_size()) The num_endpoints detected for this device is 0; is this valid? Tracing use of priv->max_packet_size in the driver it it looks like doing something like:
priv->max_packet_size = (ep_desc) ?
le16_to_cpu(ep_desc->wMaxPacketSize) : 0x40;
would alleviate the crash, I'd like to verify that this would be valid to do.
thanks
Jun 2 08:22:23 evoc-rnic45 kernel: ftdi_sio 2-1:1.2: FTDI USB Serial Device converter detected Jun 2 08:22:23 evoc-rnic45 kernel: usb 2-1: Detected FT2232C Jun 2 08:22:23 evoc-rnic45 kernel: usb 2-1: Number of endpoints 0 Jun 2 08:22:23 evoc-rnic45 kernel: BUG: unable to handle kernel NULL pointer dereference at 00000030 Jun 2 08:22:23 evoc-rnic45 kernel: IP: [<f8abd4a7>] ftdi_sio_port_probe+0x267/0x730 [ftdi_sio] Jun 2 08:22:23 evoc-rnic45 kernel: *pdpt = 0000000035e4a001 *pde = 000000003dd29067 Jun 2 08:22:23 evoc-rnic45 kernel: Oops: 0000 [#1] SMP Jun 2 08:22:23 evoc-rnic45 kernel: last sysfs file: /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/manufacturer Jun 2 08:22:23 evoc-rnic45 kernel: Modules linked in: ftdi_sio usbserial mlSysLeds(U) coretemp hwmon sunrpc cpufreq_ondemand acpi_cpufreq ipv6 ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables snd_usb_audio snd_seq snd_pcm snd_timer snd_page_alloc snd_usb_lib snd_rawmidi snd_seq_device snd_hwdep snd soundcore serio_raw i2c_i801 sg iTCO_wdt iTCO_vendor_support r8169 mii ext4 jbd2 ext3 jbd mbcache sd_mod crc_t10dif pata_acpi ata_generic ata_piix i915 drm_kms_helper drm i2c_algo_bit i2c_core video output dm_mod [last unloaded: scsi_wait_scan] Jun 2 08:22:23 evoc-rnic45 kernel: Jun 2 08:22:23 evoc-rnic45 kernel: Pid: 29, comm: khubd Not tainted (2.6.32-71.29.1.el6.i686 #1) To Be Filled By O.E.M. Jun 2 08:22:23 evoc-rnic45 kernel: EIP: 0060:[<f8abd4a7>] EFLAGS: 00010246 CPU: 1 Jun 2 08:22:23 evoc-rnic45 kernel: EIP is at ftdi_sio_port_probe+0x267/0x730 [ftdi_sio] Jun 2 08:22:23 evoc-rnic45 kernel: EAX: 0000002c EBX: f5dbb400 ECX: f5df5864 EDX: f5c1f440 Jun 2 08:22:23 evoc-rnic45 kernel: ESI: f5df5800 EDI: f5dbb4f0 EBP: 00000000 ESP: f716da58 Jun 2 08:22:23 evoc-rnic45 kernel: DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Jun 2 08:22:23 evoc-rnic45 kernel: Process khubd (pid: 29, ti=f716c000 task=f70f9030 task.ti=f716c000) Jun 2 08:22:23 evoc-rnic45 kernel: Stack: Jun 2 08:22:23 evoc-rnic45 kernel: f8abef40 c0976b2a f61e1d00 00000000 00000004 c057a904 f716da9c f6206c00 Jun 2 08:22:23 evoc-rnic45 kernel: <0> f6206c00 f5df5864 0000002c 00000000 f5c1f440 f6205458 f5de4ed4 00000000 Jun 2 08:22:23 evoc-rnic45 kernel: <0> c057b236 00000000 f5dbb4f0 f5dbb400 f8ac1ea0 f8a93c7c f5dbb4f8 00000000 Jun 2 08:22:23 evoc-rnic45 kernel: Call Trace: Jun 2 08:22:23 evoc-rnic45 kernel: [<c057a904>] ? sysfs_addrm_finish+0x14/0x200 Jun 2 08:22:23 evoc-rnic45 kernel: [<c057b236>] ? sysfs_do_create_link+0xa6/0x120 Jun 2 08:22:23 evoc-rnic45 kernel: [<f8a93c7c>] ? usb_serial_device_probe+0x5c/0xd0 [usbserial] Jun 2 08:22:23 evoc-rnic45 kernel: [<c057b2df>] ? sysfs_create_link+0xf/0x20 Jun 2 08:22:23 evoc-rnic45 kernel: [<c06a1c77>] ? driver_probe_device+0x87/0x290 Jun 2 08:22:23 evoc-rnic45 kernel: [<c07f7e62>] ? klist_next+0x62/0xd0 Jun 2 08:22:23 evoc-rnic45 kernel: [<c06a1f00>] ? __device_attach+0x0/0x50 Jun 2 08:22:23 evoc-rnic45 kernel: [<c06a0db2>] ? bus_for_each_drv+0x52/0x80 Jun 2 08:22:23 evoc-rnic45 kernel: [<c06a1ff2>] ? device_attach+0x72/0x90 Jun 2 08:22:23 evoc-rnic45 kernel: [<c06a1f00>] ? __device_attach+0x0/0x50 Jun 2 08:22:23 evoc-rnic45 kernel: [<c06a0b7d>] ? bus_probe_device+0x1d/0x40 Jun 2 08:22:23 evoc-rnic45 kernel: [<c069f336>] ? device_add+0
Signature · 2 lines
Office: (978)401-4032 (x123 internally) Cell: (603) 759-6953
Quoted 3 lines · Mike Remski
Please CC me as not subscribed to list.
Third party device, with FTDI chip on it. Get this when plugging device in. Discovered in kernel 2.6.32
Wow, that kernel is ancient. Please upgrade to a more recent kernel such as v3.14.5, or you need to get support from whatever vendor is forcing you to use such an old kernel.
Good luck,
Johan
Thanks Johan, that's why I looked at the cross references for ftdi_sio.c over on
http://lxr.free-electrons.com/source/drivers/usb/serial/ftdi_sio.c, latest version it's showing is 3.14. It appears that the ftdi_sio code is largely the same as in 2.6.32, particularly in the ftdi_set_max_packet_size() function.
I'm trying to verify if the "number of endpoints is 0" is a valid situation.
Just a typical day of "fun with kernels and devices".
Quoted 10 lines · Johan Hovold
Quoted 3 lines · Mike Remski
Please CC me as not subscribed to list.
Third party device, with FTDI chip on it. Get this when plugging device in. Discovered in kernel 2.6.32Wow, that kernel is ancient. Please upgrade to a more recent kernel such as v3.14.5, or you need to get support from whatever vendor is forcing you to use such an old kernel.
Good luck,
Johan
Signature · 2 lines
Office: (978)401-4032 (x123 internally) Cell: (603) 759-6953
[ Please avoid top-posting. ]
Quoted 6 lines · Mike Remski
Thanks Johan, that's why I looked at the cross references for
ftdi_sio.cover on
http://lxr.free-electrons.com/source/drivers/usb/serial/ftdi_sio.c,
latest version it's showing is 3.14. It appears that theftdi_siocode is largely the same as in 2.6.32, particularly in theftdi_set_max_packet_size()function.
Lots of things have changed since v2.6.32 and not just in the driver itself but in all the infrastructure it relies on.
Quoted 2 lines
I'm trying to verify if the "number of endpoints is 0" is a valid situation.
No, that is not normal, but it should not crash the driver if it's a hardware issue. What is the lsusb -v output of your device (make sure the ftdi_sio driver isn't loaded when connecting the device).
And what happens if you plug it into a machine running a recent kernel?
Thanks,
Johan
Quoted 14 lines · Johan Hovold
[ Please avoid top-posting. ]
Quoted 6 lines · Mike Remski
Thanks Johan, that's why I looked at the cross references for
ftdi_sio.cover on
http://lxr.free-electrons.com/source/drivers/usb/serial/ftdi_sio.c,
latest version it's showing is 3.14. It appears that theftdi_siocode is largely the same as in 2.6.32, particularly in theftdi_set_max_packet_size()function.Lots of things have changed since v2.6.32 and not just in the driver itself but in all the infrastructure it relies on.
Quoted 2 lines
I'm trying to verify if the "number of endpoints is 0" is a valid situation.
Quoted 8 lines
No, that is not normal, but it should not crash the driver if it's a hardware issue. What is the lsusb -v output of your device (make sure the
ftdi_siodriver isn't loaded when connecting the device).And what happens if you plug it into a machine running a recent kernel?
Thanks,
Johan
Thanks Johan; sorry for top posting.
An even more ancient kernel (2.6.18) has v1.4.3 of the ftdi_sio.c and I do not see this problem. In v1.4.3,ftdi_sio_attach() is doing the work that is now in ftdi_sio_port_probe(), but 1.4.3 does not have the ftdi_set_max_packet_size() code. The device works fine under 2.6.18. I have to see if I can scrounge up a machine running a later kernel (other than my desktop).
Should have included this earlier but its unmodified CentOs 6.0 and 6.4, kernel is:
Linux nicA91A84 2.6.32-71.29.1.el6.i686 #1 SMP Tue May 10 17:35:05 CDT 2011 i686 i686 i386 GNU/Linux
lsusb -v cut for the device in question.
Bus 005 Device 003: ID 1fdf:1001
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x1fdf
idProduct 0x1001
bcdDevice 0.03
iManufacturer 1 Sepura iProduct 2 Colour Console iSerial 0 bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 134
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 0 None
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 0 None
iInterface 0
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities 0x01
call management
bDataInterface 1
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 2
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 0 None
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 0 None
iInterface 0
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities 0x01
call management
bDataInterface 3
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Union:
bMasterInterface 2
bSlaveInterface 3
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0001
Self Powered
Signature · 2 lines
Office: (978)401-4032 (x123 internally) Cell: (603) 759-6953
Quoted 14 lines · Johan Hovold
[ Please avoid top-posting. ]
Quoted 6 lines · Mike Remski
Thanks Johan, that's why I looked at the cross references for
ftdi_sio.cover on
http://lxr.free-electrons.com/source/drivers/usb/serial/ftdi_sio.c,
latest version it's showing is 3.14. It appears that theftdi_siocode is largely the same as in 2.6.32, particularly in theftdi_set_max_packet_size()function.Lots of things have changed since v2.6.32 and not just in the driver itself but in all the infrastructure it relies on.
Quoted 2 lines
I'm trying to verify if the "number of endpoints is 0" is a valid situation.
Quoted 8 lines
No, that is not normal, but it should not crash the driver if it's a hardware issue. What is the lsusb -v output of your device (make sure the
ftdi_siodriver isn't loaded when connecting the device).And what happens if you plug it into a machine running a recent kernel?
Thanks,
Johan
Plugging device into a system running Redhat, kernel 3.3.4 crashes the system.
Signature · 2 lines
Office: (978)401-4032 (x123 internally) Cell: (603) 759-6953
Quoted 19 lines · Mike Remski
Quoted 18 lines · Johan Hovold
[ Please avoid top-posting. ]
Quoted 6 lines · Mike Remski
Thanks Johan, that's why I looked at the cross references for
ftdi_sio.cover on
http://lxr.free-electrons.com/source/drivers/usb/serial/ftdi_sio.c,
latest version it's showing is 3.14. It appears that theftdi_siocode is largely the same as in 2.6.32, particularly in theftdi_set_max_packet_size()function.Lots of things have changed since v2.6.32 and not just in the driver itself but in all the infrastructure it relies on.
Quoted 2 lines
I'm trying to verify if the "number of endpoints is 0" is a valid situation.
No, that is not normal, but it should not crash the driver if it's a hardware issue. What is the lsusb -v output of your device (make sure the
ftdi_siodriver isn't loaded when connecting the device).
Quoted 6 lines
Quoted 4 lines
And what happens if you plug it into a machine running a recent kernel?
Thanks,
JohanPlugging device into a system running Redhat, kernel 3.3.4 crashes the system.
3.3.4 is still _many_ years old. Please try something from 2014 at the latest...
Quoted 23 lines · Mike Remski
Quoted 14 lines · Johan Hovold
[ Please avoid top-posting. ]
Quoted 6 lines · Mike Remski
Thanks Johan, that's why I looked at the cross references for
ftdi_sio.cover on
http://lxr.free-electrons.com/source/drivers/usb/serial/ftdi_sio.c,
latest version it's showing is 3.14. It appears that theftdi_siocode is largely the same as in 2.6.32, particularly in theftdi_set_max_packet_size()function.Lots of things have changed since v2.6.32 and not just in the driver itself but in all the infrastructure it relies on.
Quoted 2 lines
I'm trying to verify if the "number of endpoints is 0" is a valid situation.
Quoted 8 lines
No, that is not normal, but it should not crash the driver if it's a hardware issue. What is the lsusb -v output of your device (make sure the
ftdi_siodriver isn't loaded when connecting the device).And what happens if you plug it into a machine running a recent kernel?
Thanks,
Johan
Quoted 8 lines
Thanks Johan; sorry for top posting.
An even more ancient kernel (2.6.18) has v1.4.3 of theftdi_sio.cand I do not see this problem. In v1.4.3,ftdi_sio_attach()is doing the work that is now inftdi_sio_port_probe(), but 1.4.3 does not have theftdi_set_max_packet_size()code. The device works fine under 2.6.18. I have to see if I can scrounge up
a machine running a later kernel (other than my desktop).
Your desktop should be just fine for testing.
Quoted 34 lines
Should have included this earlier but its unmodified CentOs 6.0 and 6.4, kernel is:
Linux nicA91A84 2.6.32-71.29.1.el6.i686 #1 SMP Tue May 10 17:35:05 CDT 2011 i686 i686 i386 GNU/Linux
lsusb -v cut for the device in question.
Bus 005 Device 003: ID 1fdf:1001
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor0x1fdf
idProduct0x1001
bcdDevice 0.03iManufacturer 1 Sepura iProduct 2 Colour Console iSerial 0 bNumConfigurations 1Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 134
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes0xc0
Self Powered
Quoted 8 lines
MaxPower 100mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
Is this indeed the right device? Then you seem to be using the wrong driver as this is no FTDI device, but a CDC-ACM modem-class device which should be driven by the cdc-acm driver.
Quoted 71 lines
bFunctionProtocol 0 None
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 0 None
iInterface 0
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities0x01
call management
bDataInterface 1
CDC ACM:
bmCapabilities0x02
line coding and serial state
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress0x83EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize0x00401x 64 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress0x01EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize0x00401x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress0x82EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize0x00401x 64 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 2
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
Quoted 8 lines
bFunctionProtocol 0 None
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0
The third interface lacks endpoints and crashes the ftdi_sio driver. This shouldn't happen (even if you're forcing the wrong driver to bind), so I'll fix it up if still broken in v3.15-rc.
Thanks,
Johan
Quoted 159 lines · Johan Hovold
Quoted 23 lines · Mike Remski
Quoted 14 lines · Johan Hovold
[ Please avoid top-posting. ]
Quoted 6 lines · Mike Remski
Thanks Johan, that's why I looked at the cross references for
ftdi_sio.cover on
http://lxr.free-electrons.com/source/drivers/usb/serial/ftdi_sio.c,
latest version it's showing is 3.14. It appears that theftdi_siocode is largely the same as in 2.6.32, particularly in theftdi_set_max_packet_size()function.Lots of things have changed since v2.6.32 and not just in the driver itself but in all the infrastructure it relies on.
Quoted 2 lines
I'm trying to verify if the "number of endpoints is 0" is a valid situation.
Quoted 8 lines
No, that is not normal, but it should not crash the driver if it's a hardware issue. What is the lsusb -v output of your device (make sure the
ftdi_siodriver isn't loaded when connecting the device).And what happens if you plug it into a machine running a recent kernel?
Thanks,
JohanQuoted 8 lines
Thanks Johan; sorry for top posting.
An even more ancient kernel (2.6.18) has v1.4.3 of theftdi_sio.cand I do not see this problem. In v1.4.3,ftdi_sio_attach()is doing the work that is now inftdi_sio_port_probe(), but 1.4.3 does not have theftdi_set_max_packet_size()code. The device works fine under 2.6.18. I have to see if I can scrounge up
a machine running a later kernel (other than my desktop).Your desktop should be just fine for testing.
Quoted 34 lines
Should have included this earlier but its unmodified CentOs 6.0 and 6.4, kernel is:
Linux nicA91A84 2.6.32-71.29.1.el6.i686 #1 SMP Tue May 10 17:35:05 CDT 2011 i686 i686 i386 GNU/Linux
lsusb -v cut for the device in question.
Bus 005 Device 003: ID 1fdf:1001
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor0x1fdf
idProduct0x1001
bcdDevice 0.03
iManufacturer 1 Sepura
iProduct 2 Colour Console
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 134
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes0xc0
Self PoweredQuoted 8 lines
MaxPower 100mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)Is this indeed the right device? Then you seem to be using the wrong driver as this is no FTDI device, but a CDC-ACM modem-class device which should be driven by the cdc-acm driver.
Quoted 71 lines
bFunctionProtocol 0 None
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 0 None
iInterface 0
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities0x01
call management
bDataInterface 1
CDC ACM:
bmCapabilities0x02
line coding and serial state
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress0x83EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize0x00401x 64 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress0x01EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize0x00401x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress0x82EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize0x00401x 64 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 2
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)Quoted 8 lines
bFunctionProtocol 0 None
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0
Quoted 6 lines
The third interface lacks endpoints and crashes the
ftdi_siodriver. This shouldn't happen (even if you're forcing the wrong driver to bind), so I'll fix it up if still broken in v3.15-rc.Thanks,
Johan
Johan,
Thanks again. Yes, the device does indeed have an FTDI embedded in it; they've programmed in their own ids. They supply a Windows driver for it, but that doesn't do me any good. :)
I will work on getting a later version set up for testing. May not happen today but as soon as possible.
Signature · 2 lines
Office: (978)401-4032 (x123 internally) Cell: (603) 759-6953
Quoted 20 lines · Greg KH
Quoted 19 lines · Mike Remski
Quoted 18 lines · Johan Hovold
[ Please avoid top-posting. ]
Quoted 6 lines · Mike Remski
Thanks Johan, that's why I looked at the cross references for
ftdi_sio.cover on
http://lxr.free-electrons.com/source/drivers/usb/serial/ftdi_sio.c,
latest version it's showing is 3.14. It appears that theftdi_siocode is largely the same as in 2.6.32, particularly in theftdi_set_max_packet_size()function.Lots of things have changed since v2.6.32 and not just in the driver itself but in all the infrastructure it relies on.
Quoted 2 lines
I'm trying to verify if the "number of endpoints is 0" is a valid situation.
No, that is not normal, but it should not crash the driver if it's a hardware issue. What is the lsusb -v output of your device (make sure the
ftdi_siodriver isn't loaded when connecting the device).
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
And what happens if you plug it into a machine running a recent kernel?
Thanks,
JohanPlugging device into a system running Redhat, kernel 3.3.4 crashes the system.
3.3.4 is still _many_ years old. Please try something from 2014 at the latest...
Understood Greg; it was the best I had immediately available. I am working on setting up/finding a later kernel at the moment.
thanks
Signature · 2 lines
Office: (978)401-4032 (x123 internally) Cell: (603) 759-6953
Quoted 129 lines · Mike Remski
Quoted 128 lines · Johan Hovold
Quoted 32 lines · Mike Remski
Quoted 3 lines · Johan Hovold
[ Please avoid top-posting. ]
On Mon, Jun 02, 2014 at 11:16:11AM -0400, Mike Remski wrote:
lsusb -v cut for the device in question.
Bus 005 Device 003: ID 1fdf:1001
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor0x1fdf
idProduct0x1001
bcdDevice 0.03
iManufacturer 1 Sepura
iProduct 2 Colour Console
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 134
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes0xc0
Self PoweredQuoted 8 lines
MaxPower 100mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)Is this indeed the right device? Then you seem to be using the wrong driver as this is no FTDI device, but a CDC-ACM modem-class device which should be driven by the cdc-acm driver.
Quoted 71 lines
bFunctionProtocol 0 None
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 0 None
iInterface 0
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities0x01
call management
bDataInterface 1
CDC ACM:
bmCapabilities0x02
line coding and serial state
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress0x83EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize0x00401x 64 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress0x01EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize0x00401x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress0x82EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize0x00401x 64 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 2
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)Quoted 8 lines
bFunctionProtocol 0 None
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0The third interface lacks endpoints and crashes the
ftdi_siodriver. This shouldn't happen (even if you're forcing the wrong driver to bind), so I'll fix it up if still broken in v3.15-rc.
Quoted 6 lines
Quoted 2 lines
Thanks,
JohanJohan,
Thanks again. Yes, the device does indeed have an FTDI embedded in it; they've programmed in their own ids. They supply a Windows driver for it, but that doesn't do me any good. :)
Not just their own ID's it seems.
Have you tried just using the cdc-acm driver? The ports should up as /dev/ttyACMx instead of ttyUSBx.
Johan
Quoted 135 lines · Johan Hovold
Quoted 128 lines · Mike Remski
Quoted 127 lines · Johan Hovold
Quoted 31 lines · Mike Remski
Quoted 3 lines · Johan Hovold
[ Please avoid top-posting. ]
On Mon, Jun 02, 2014 at 11:16:11AM -0400, Mike Remski wrote:
lsusb -v cut for the device in question.
Bus 005 Device 003: ID 1fdf:1001
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor0x1fdf
idProduct0x1001
bcdDevice 0.03
iManufacturer 1 Sepura
iProduct 2 Colour Console
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 134
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes0xc0
Self PoweredQuoted 8 lines
MaxPower 100mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)Is this indeed the right device? Then you seem to be using the wrong driver as this is no FTDI device, but a CDC-ACM modem-class device which should be driven by the cdc-acm driver.
Quoted 71 lines
bFunctionProtocol 0 None
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 0 None
iInterface 0
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities0x01
call management
bDataInterface 1
CDC ACM:
bmCapabilities0x02
line coding and serial state
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress0x83EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize0x00401x 64 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress0x01EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize0x00401x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress0x82EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize0x00401x 64 bytes
bInterval 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 2
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)Quoted 8 lines
bFunctionProtocol 0 None
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0The third interface lacks endpoints and crashes the
ftdi_siodriver. This shouldn't happen (even if you're forcing the wrong driver to bind), so I'll fix it up if still broken in v3.15-rc.Quoted 6 lines
Quoted 2 lines
Thanks,
JohanJohan,
Thanks again. Yes, the device does indeed have an FTDI embedded in it; they've programmed in their own ids. They supply a Windows driver for it, but that doesn't do me any good. :)
Quoted 6 lines
Not just their own ID's it seems.
Have you tried just using the cdc-acm driver? The ports should up as
/dev/ttyACMxinstead of ttyUSBx.Johan
Not yet, next on the list.
I'm suspecting that bNumEndpoints == 0 is causing endpoint[1].desc to stay at NULL (line 1567 in 3.1.4.5 source), so by the time it gets used later on, I'm hitting the NULL dereference.
Thanks.
Signature · 2 lines
Office: (978)401-4032 (x123 internally) Cell: (603) 759-6953
Quoted 17 lines · Mike Remski
Quoted 16 lines · Johan Hovold
Quoted 15 lines · Mike Remski
Quoted 10 lines · Johan Hovold
Quoted 4 lines · Mike Remski
Quoted 3 lines · Johan Hovold
[ Please avoid top-posting. ]
On Mon, Jun 02, 2014 at 11:16:11AM -0400, Mike Remski wrote:
The third interface lacks endpoints and crashes the
ftdi_siodriver. This shouldn't happen (even if you're forcing the wrong driver to bind), so I'll fix it up if still broken in v3.15-rc.Johan,
Thanks again. Yes, the device does indeed have an FTDI embedded in it; they've programmed in their own ids. They supply a Windows driver for it, but that doesn't do me any good. :)
Quoted 6 lines
Quoted 5 lines
Not just their own ID's it seems.
Have you tried just using the cdc-acm driver? The ports should up as
/dev/ttyACMxinstead of ttyUSBx.Not yet, next on the list.
You really should try this before anything else. :)
Quoted 3 lines
I'm suspecting that bNumEndpoints == 0 is causing endpoint[1].desc to stay at NULL (line 1567 in 3.1.4.5 source), so by the time it gets used later on, I'm hitting the NULL dereference.
Yeah, the code is obviously broken (also in v3.15-rc). It should probably work to just return from ftdi_set_max_packet_size if num_endpoints is 0 if you want to try that (or you can use your ?:
construct), but I should be able to fix this up properly on Wednesday.
Thanks,
Johan
Quoted 28 lines · Johan Hovold
Quoted 16 lines · Mike Remski
Quoted 15 lines · Johan Hovold
Quoted 14 lines · Mike Remski
Quoted 9 lines · Johan Hovold
Quoted 4 lines · Mike Remski
Quoted 3 lines · Johan Hovold
[ Please avoid top-posting. ]
On Mon, Jun 02, 2014 at 11:16:11AM -0400, Mike Remski wrote:
The third interface lacks endpoints and crashes the
ftdi_siodriver. This shouldn't happen (even if you're forcing the wrong driver to bind), so I'll fix it up if still broken in v3.15-rc.Johan,
Thanks again. Yes, the device does indeed have an FTDI embedded in it; they've programmed in their own ids. They supply a Windows driver for it, but that doesn't do me any good. :)Quoted 6 lines
Quoted 5 lines
Not just their own ID's it seems.
Have you tried just using the cdc-acm driver? The ports should up as
/dev/ttyACMxinstead of ttyUSBx.Not yet, next on the list.
You really should try this before anything else. :)
Quoted 3 lines
I'm suspecting that bNumEndpoints == 0 is causing endpoint[1].desc to stay at NULL (line 1567 in 3.1.4.5 source), so by the time it gets used later on, I'm hitting the NULL dereference.
Quoted 7 lines
Yeah, the code is obviously broken (also in v3.15-rc). It should probably work to just return from
ftdi_set_max_packet_sizeifnum_endpointsis 0 if you want to try that (or you can use your ?:
construct), but I should be able to fix this up properly on Wednesday.Thanks,
Johan
Yep, trying to get the modalias correct so the cdc_acm driver recognizes and loads for the device in question.
Appreciate your help.
m
Signature · 2 lines
Office: (978)401-4032 (x123 internally) Cell: (603) 759-6953
Quoted 28 lines · Johan Hovold
Quoted 16 lines · Mike Remski
Quoted 15 lines · Johan Hovold
Quoted 14 lines · Mike Remski
Quoted 9 lines · Johan Hovold
Quoted 4 lines · Mike Remski
Quoted 3 lines · Johan Hovold
[ Please avoid top-posting. ]
On Mon, Jun 02, 2014 at 11:16:11AM -0400, Mike Remski wrote:
The third interface lacks endpoints and crashes the
ftdi_siodriver. This shouldn't happen (even if you're forcing the wrong driver to bind), so I'll fix it up if still broken in v3.15-rc.Johan,
Thanks again. Yes, the device does indeed have an FTDI embedded in it; they've programmed in their own ids. They supply a Windows driver for it, but that doesn't do me any good. :)Quoted 6 lines
Quoted 5 lines
Not just their own ID's it seems.
Have you tried just using the cdc-acm driver? The ports should up as
/dev/ttyACMxinstead of ttyUSBx.Not yet, next on the list.
You really should try this before anything else. :)
Quoted 3 lines
I'm suspecting that bNumEndpoints == 0 is causing endpoint[1].desc to stay at NULL (line 1567 in 3.1.4.5 source), so by the time it gets used later on, I'm hitting the NULL dereference.
Quoted 7 lines
Yeah, the code is obviously broken (also in v3.15-rc). It should probably work to just return from
ftdi_set_max_packet_sizeifnum_endpointsis 0 if you want to try that (or you can use your ?:
construct), but I should be able to fix this up properly on Wednesday.Thanks,
Johan
Johan,
I had a chance to play around with code over in ftdi_sio.c; adding this:
if (!num_endpoints) {
return;
} after the "Number of endpoints" message gets rid of the crash,
everything looks to be working correctly.
Thanks again
m
Signature · 2 lines
Office: (978)401-4032 (x123 internally) Cell: (603) 759-6953
Quoted 18 lines · Mike Remski
Quoted 17 lines · Johan Hovold
Quoted 16 lines · Mike Remski
Quoted 15 lines · Johan Hovold
Quoted 14 lines · Mike Remski
Quoted 9 lines · Johan Hovold
Quoted 4 lines · Mike Remski
Quoted 3 lines · Johan Hovold
[ Please avoid top-posting. ]
On Mon, Jun 02, 2014 at 11:16:11AM -0400, Mike Remski wrote:
The third interface lacks endpoints and crashes the
ftdi_siodriver. This shouldn't happen (even if you're forcing the wrong driver to bind), so I'll fix it up if still broken in v3.15-rc.Johan,
Thanks again. Yes, the device does indeed have an FTDI embedded in it; they've programmed in their own ids. They supply a Windows driver for it, but that doesn't do me any good. :)
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Quoted 5 lines
Not just their own ID's it seems.
Have you tried just using the cdc-acm driver? The ports should up as
/dev/ttyACMxinstead of ttyUSBx.Not yet, next on the list.
You really should try this before anything else. :)
How did it go with cdc-acm?
You probably need the following commit (depending how well-supported your old kernel is):
5b239f0aebd4d ("USB: cdc-acm: Add pseudo modem without AT command capabilities")
in order for the device to bind.
Quoted 10 lines
Quoted 10 lines
Quoted 3 lines
I'm suspecting that bNumEndpoints == 0 is causing endpoint[1].desc to stay at NULL (line 1567 in 3.1.4.5 source), so by the time it gets used later on, I'm hitting the NULL dereference.
Yeah, the code is obviously broken (also in v3.15-rc). It should probably work to just return from
ftdi_set_max_packet_sizeifnum_endpointsis 0 if you want to try that (or you can use your ?:
construct), but I should be able to fix this up properly on Wednesday.Thanks,
Johan
Quoted 8 lines
Johan,
I had a chance to play around with code over inftdi_sio.c; adding this:if (!num_endpoints) { return; }after the "Number of endpoints" message gets rid of the crash,
everything looks to be working correctly.
Good. Care to try the patch below so I can add a formal Tested-by tag as well?
Thanks,
Johan
Quoted 1 line
From
4ddea3a573b8c15beefb67bc35c440850063d79dMon Sep 17 00:00:00 2001
From: Johan Hovold <[email protected]>
Date: Wed, 4 Jun 2014 14:09:43 +0200
Subject: [PATCH 1/5] USB: ftdi_sio: fix null deref at port probe
Fix NULL-pointer dereference when probing an interface with no endpoints.
These devices have two bulk endpoints per interface, but this avoids crashing the kernel if a user forces a non-FTDI device to be probed.
Note that the iterator variable was made unsigned in order to avoid a maybe-uninitialized compiler warning for ep_desc after the loop.
calculation")
--- drivers/usb/serial/ftdi_sio.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/usb/serial/ftdi_sio.c +5 -2
@@ -1564,14 +1564,17 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port)struct usb_device *udev = serial->dev;struct usb_interface *interface = serial->interface; -struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1 ].desc; +struct usb_endpoint_descriptor *ep_desc;unsigned num_endpoints; -int i; +unsigned i; num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;dev_info (&udev->dev,"Number of endpoints %d\n" , num_endpoints); +if (!num_endpoints) +return ; +/* NOTE: some customers have programmed FT232R/FT245R devices * with an endpoint size of 0 - not good. In this case, we * want to override the endpoint descriptor setting and use a
Signature · 1 line
1.8.5.5
Quoted 99 lines · Johan Hovold
Quoted 18 lines · Mike Remski
Quoted 17 lines · Johan Hovold
Quoted 16 lines · Mike Remski
Quoted 15 lines · Johan Hovold
Quoted 14 lines · Mike Remski
Quoted 9 lines · Johan Hovold
Quoted 4 lines · Mike Remski
Quoted 3 lines · Johan Hovold
[ Please avoid top-posting. ]
On Mon, Jun 02, 2014 at 11:16:11AM -0400, Mike Remski wrote:
The third interface lacks endpoints and crashes the
ftdi_siodriver. This shouldn't happen (even if you're forcing the wrong driver to bind), so I'll fix it up if still broken in v3.15-rc.Johan,
Thanks again. Yes, the device does indeed have an FTDI embedded in it; they've programmed in their own ids. They supply a Windows driver for it, but that doesn't do me any good. :)Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Quoted 5 lines
Not just their own ID's it seems.
Have you tried just using the cdc-acm driver? The ports should up as
/dev/ttyACMxinstead of ttyUSBx.Not yet, next on the list.
You really should try this before anything else. :)
How did it go with cdc-acm?
You probably need the following commit (depending how well-supported your old kernel is):
5b239f0aebd4d("USB: cdc-acm: Add pseudo modem without AT command capabilities")in order for the device to bind.
Quoted 10 lines
Quoted 10 lines
Quoted 3 lines
I'm suspecting that bNumEndpoints == 0 is causing endpoint[1].desc to stay at NULL (line 1567 in 3.1.4.5 source), so by the time it gets used later on, I'm hitting the NULL dereference.
Yeah, the code is obviously broken (also in v3.15-rc). It should probably work to just return from
ftdi_set_max_packet_sizeifnum_endpointsis 0 if you want to try that (or you can use your ?:
construct), but I should be able to fix this up properly on Wednesday.Thanks,
JohanQuoted 8 lines
Johan,
I had a chance to play around with code over inftdi_sio.c; adding this:if (!num_endpoints) { return; }after the "Number of endpoints" message gets rid of the crash,
everything looks to be working correctly.Good. Care to try the patch below so I can add a formal Tested-by tag as well?
Thanks,
JohanQuoted 1 line
From
4ddea3a573b8c15beefb67bc35c440850063d79dMon Sep 17 00:00:00 2001From: Johan Hovold <[email protected]>
Date: Wed, 4 Jun 2014 14:09:43 +0200
Subject: [PATCH 1/5] USB:ftdi_sio: fix null deref at port probeFix NULL-pointer dereference when probing an interface with no endpoints.
These devices have two bulk endpoints per interface, but this avoids crashing the kernel if a user forces a non-FTDI device to be probed.
Note that the iterator variable was made unsigned in order to avoid a maybe-uninitialized compiler warning for
ep_descafter the loop.Fixes 895f28badce9 ("USB: ftdi_sio: fix hi-speed device packet sizecalculation")
Reported-by Mike Remski <[email protected]>Cc <[email protected]> # 2.3.61Signed-off-by Johan Hovold <[email protected]>--- drivers/usb/serial/ftdi_sio.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)drivers/usb/serial/ftdi_sio.c +2
-2@@ -1564,14 +1564,17 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port)struct usb_device *udev = serial->dev;struct usb_interface *interface = serial->interface; -struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1 ].desc; +struct usb_endpoint_descriptor *ep_desc;unsigned num_endpoints; -int i; +unsigned i;
drivers/usb/serial/ftdi_sio.c static void ftdi_set_max_packet_size(struct usb_serial_port *port) · line 1580
Quoted 10 lines
drivers/usb/serial/ftdi_sio.c +3
-0num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;dev_info (&udev->dev,"Number of endpoints %d\n" , num_endpoints); +if (!num_endpoints) +return ; +/* NOTE: some customers have programmed FT232R/FT245R devices * with an endpoint size of 0 - not good. In this case, we * want to override the endpoint descriptor setting and use a
Thanks Johan. I tried to get the cdc_acm working; did not have much luck/time (typical overcommit on workload) I will retry with the commit mentioned.
I will try the patch today and get back to you. Nice on the ep_desc: looking at the code priv->max_packet_size is attached to the port, your change would use the last thing off of cur_altsetting->endpoint[], but I'm wondering if we should actually be setting priv->max_packet_size to whatever the max is of all endpoint[].desc->wMaxPacketSize?
Thoughts?
m
Signature · 2 lines
Office: (978)401-4032 (x123 internally) Cell: (603) 759-6953
Quoted 60 lines · Mike Remski
Quoted 38 lines · Johan Hovold
Quoted 1 line
From
4ddea3a573b8c15beefb67bc35c440850063d79dMon Sep 17 00:00:00 2001From: Johan Hovold <[email protected]>
Date: Wed, 4 Jun 2014 14:09:43 +0200
Subject: [PATCH 1/5] USB:ftdi_sio: fix null deref at port probeFix NULL-pointer dereference when probing an interface with no endpoints.
These devices have two bulk endpoints per interface, but this avoids crashing the kernel if a user forces a non-FTDI device to be probed.
Note that the iterator variable was made unsigned in order to avoid a maybe-uninitialized compiler warning for
ep_descafter the loop.Fixes 895f28badce9 ("USB: ftdi_sio: fix hi-speed device packet sizecalculation")
Reported-by Mike Remski <[email protected]>Cc <[email protected]> # 2.3.61Signed-off-by Johan Hovold <[email protected]>--- drivers/usb/serial/ftdi_sio.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)drivers/usb/serial/ftdi_sio.c +2
-2@@ -1564,14 +1564,17 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port)struct usb_device *udev = serial->dev;struct usb_interface *interface = serial->interface; -struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1 ].desc; +struct usb_endpoint_descriptor *ep_desc;unsigned num_endpoints; -int i; +unsigned i;drivers/usb/serial/ftdi_sio.c static void ftdi_set_max_packet_size(struct usb_serial_port *port) · line 1580
Quoted 10 lines
drivers/usb/serial/ftdi_sio.c +3
-0num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;dev_info (&udev->dev,"Number of endpoints %d\n" , num_endpoints); +if (!num_endpoints) +return ; +/* NOTE: some customers have programmed FT232R/FT245R devices * with an endpoint size of 0 - not good. In this case, we * want to override the endpoint descriptor setting and use a Thanks Johan. I tried to get the
cdc_acmworking; did not have much luck/time (typical overcommit on workload) I will retry with the commit mentioned.
I will try the patch today and get back to you. Nice on theep_desc:
looking at the codepriv->max_packet_sizeis attached to the port, your change would use the last thing off of cur_altsetting->endpoint[], but I'm wondering if we should actually be settingpriv->max_packet_sizeto whatever the max is of all endpoint[].desc->wMaxPacketSize?
Quoted 1 line
Thoughts?
This is the exact same behaviour as the old code (minus the NULL-deref).
These device have two bulk endpoints per interface and they are supposed to be using the same max packet size (64 or 512 depending on device and host).
This value is also used during depacketisation of incoming data (and packetisation of outgoing data for legacy devices). I'm pretty convinced you're using the wrong driver, something which would lead to corruption of incoming data when the (non-existing) status bytes are stripped from the stream.
You really should try cdc-acm.
Johan
Quoted 72 lines · Johan Hovold
Quoted 58 lines · Mike Remski
Quoted 38 lines · Johan Hovold
Quoted 1 line
From
4ddea3a573b8c15beefb67bc35c440850063d79dMon Sep 17 00:00:00 2001From: Johan Hovold <[email protected]>
Date: Wed, 4 Jun 2014 14:09:43 +0200
Subject: [PATCH 1/5] USB:ftdi_sio: fix null deref at port probeFix NULL-pointer dereference when probing an interface with no endpoints.
These devices have two bulk endpoints per interface, but this avoids crashing the kernel if a user forces a non-FTDI device to be probed.
Note that the iterator variable was made unsigned in order to avoid a maybe-uninitialized compiler warning for
ep_descafter the loop.Fixes 895f28badce9 ("USB: ftdi_sio: fix hi-speed device packet sizecalculation")
Reported-by Mike Remski <[email protected]>Cc <[email protected]> # 2.3.61Signed-off-by Johan Hovold <[email protected]>--- drivers/usb/serial/ftdi_sio.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)drivers/usb/serial/ftdi_sio.c +2
-2@@ -1564,14 +1564,17 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port)struct usb_device *udev = serial->dev;struct usb_interface *interface = serial->interface; -struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1 ].desc; +struct usb_endpoint_descriptor *ep_desc;unsigned num_endpoints; -int i; +unsigned i;drivers/usb/serial/ftdi_sio.c static void ftdi_set_max_packet_size(struct usb_serial_port *port) · line 1580
Quoted 10 lines
drivers/usb/serial/ftdi_sio.c +3
-0num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;dev_info (&udev->dev,"Number of endpoints %d\n" , num_endpoints); +if (!num_endpoints) +return ; +/* NOTE: some customers have programmed FT232R/FT245R devices * with an endpoint size of 0 - not good. In this case, we * want to override the endpoint descriptor setting and use a Thanks Johan. I tried to get the
cdc_acmworking; did not have much luck/time (typical overcommit on workload) I will retry with the commit mentioned.
I will try the patch today and get back to you. Nice on theep_desc:
looking at the codepriv->max_packet_sizeis attached to the port, your change would use the last thing off of cur_altsetting->endpoint[], but I'm wondering if we should actually be settingpriv->max_packet_sizeto whatever the max is of all endpoint[].desc->wMaxPacketSize?Quoted 1 line
Thoughts?
This is the exact same behaviour as the old code (minus the NULL-deref).
These device have two bulk endpoints per interface and they are supposed to be using the same max packet size (64 or 512 depending on device and host).
This value is also used during depacketisation of incoming data (and packetisation of outgoing data for legacy devices). I'm pretty convinced you're using the wrong driver, something which would lead to corruption of incoming data when the (non-existing) status bytes are stripped from the stream.
Quoted 3 lines
You really should try cdc-acm.
Johan
Thanks for the explaination. Yes, I am working on trying cdc-acm.
Signature · 2 lines
Office: (978)401-4032 (x123 internally) Cell: (603) 759-6953
Quoted 72 lines · Johan Hovold
Quoted 58 lines · Mike Remski
Quoted 38 lines · Johan Hovold
Quoted 1 line
From
4ddea3a573b8c15beefb67bc35c440850063d79dMon Sep 17 00:00:00 2001From: Johan Hovold <[email protected]>
Date: Wed, 4 Jun 2014 14:09:43 +0200
Subject: [PATCH 1/5] USB:ftdi_sio: fix null deref at port probeFix NULL-pointer dereference when probing an interface with no endpoints.
These devices have two bulk endpoints per interface, but this avoids crashing the kernel if a user forces a non-FTDI device to be probed.
Note that the iterator variable was made unsigned in order to avoid a maybe-uninitialized compiler warning for
ep_descafter the loop.Fixes 895f28badce9 ("USB: ftdi_sio: fix hi-speed device packet sizecalculation")
Reported-by Mike Remski <[email protected]>Cc <[email protected]> # 2.3.61Signed-off-by Johan Hovold <[email protected]>--- drivers/usb/serial/ftdi_sio.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)drivers/usb/serial/ftdi_sio.c +2
-2@@ -1564,14 +1564,17 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port)struct usb_device *udev = serial->dev;struct usb_interface *interface = serial->interface; -struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1 ].desc; +struct usb_endpoint_descriptor *ep_desc;unsigned num_endpoints; -int i; +unsigned i;drivers/usb/serial/ftdi_sio.c static void ftdi_set_max_packet_size(struct usb_serial_port *port) · line 1580
Quoted 10 lines
drivers/usb/serial/ftdi_sio.c +3
-0num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;dev_info (&udev->dev,"Number of endpoints %d\n" , num_endpoints); +if (!num_endpoints) +return ; +/* NOTE: some customers have programmed FT232R/FT245R devices * with an endpoint size of 0 - not good. In this case, we * want to override the endpoint descriptor setting and use a Thanks Johan. I tried to get the
cdc_acmworking; did not have much luck/time (typical overcommit on workload) I will retry with the commit mentioned.
I will try the patch today and get back to you. Nice on theep_desc:
looking at the codepriv->max_packet_sizeis attached to the port, your change would use the last thing off of cur_altsetting->endpoint[], but I'm wondering if we should actually be settingpriv->max_packet_sizeto whatever the max is of all endpoint[].desc->wMaxPacketSize?Quoted 1 line
Thoughts?
This is the exact same behaviour as the old code (minus the NULL-deref).
These device have two bulk endpoints per interface and they are supposed to be using the same max packet size (64 or 512 depending on device and host).
This value is also used during depacketisation of incoming data (and packetisation of outgoing data for legacy devices). I'm pretty convinced you're using the wrong driver, something which would lead to corruption of incoming data when the (non-existing) status bytes are stripped from the stream.
Quoted 3 lines
You really should try cdc-acm.
Johan
Sorry, forgot to add:
Tested patch and it works as desired.
Signature · 2 lines
Office: (978)401-4032 (x123 internally) Cell: (603) 759-6953
Quoted 73 lines · Mike Remski
Quoted 72 lines · Johan Hovold
Quoted 58 lines · Mike Remski
Quoted 38 lines · Johan Hovold
Quoted 1 line
From
4ddea3a573b8c15beefb67bc35c440850063d79dMon Sep 17 00:00:00 2001From: Johan Hovold <[email protected]>
Date: Wed, 4 Jun 2014 14:09:43 +0200
Subject: [PATCH 1/5] USB:ftdi_sio: fix null deref at port probeFix NULL-pointer dereference when probing an interface with no endpoints.
These devices have two bulk endpoints per interface, but this avoids crashing the kernel if a user forces a non-FTDI device to be probed.
Note that the iterator variable was made unsigned in order to avoid a maybe-uninitialized compiler warning for
ep_descafter the loop.Fixes 895f28badce9 ("USB: ftdi_sio: fix hi-speed device packet sizecalculation")
Reported-by Mike Remski <[email protected]>Cc <[email protected]> # 2.3.61Signed-off-by Johan Hovold <[email protected]>--- drivers/usb/serial/ftdi_sio.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)drivers/usb/serial/ftdi_sio.c +2
-2@@ -1564,14 +1564,17 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port)struct usb_device *udev = serial->dev;struct usb_interface *interface = serial->interface; -struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1 ].desc; +struct usb_endpoint_descriptor *ep_desc;unsigned num_endpoints; -int i; +unsigned i;drivers/usb/serial/ftdi_sio.c static void ftdi_set_max_packet_size(struct usb_serial_port *port) · line 1580
Quoted 10 lines
drivers/usb/serial/ftdi_sio.c +3
-0num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;dev_info (&udev->dev,"Number of endpoints %d\n" , num_endpoints); +if (!num_endpoints) +return ; +/* NOTE: some customers have programmed FT232R/FT245R devices * with an endpoint size of 0 - not good. In this case, we * want to override the endpoint descriptor setting and use a Thanks Johan. I tried to get the
cdc_acmworking; did not have much luck/time (typical overcommit on workload) I will retry with the commit mentioned.
I will try the patch today and get back to you. Nice on theep_desc:
looking at the codepriv->max_packet_sizeis attached to the port, your change would use the last thing off of cur_altsetting->endpoint[], but I'm wondering if we should actually be settingpriv->max_packet_sizeto whatever the max is of all endpoint[].desc->wMaxPacketSize?Quoted 1 line
Thoughts?
This is the exact same behaviour as the old code (minus the NULL-deref).
These device have two bulk endpoints per interface and they are supposed to be using the same max packet size (64 or 512 depending on device and host).
This value is also used during depacketisation of incoming data (and packetisation of outgoing data for legacy devices). I'm pretty convinced you're using the wrong driver, something which would lead to corruption of incoming data when the (non-existing) status bytes are stripped from the stream.
Quoted 5 lines
Quoted 3 lines
You really should try cdc-acm.
Johan
Sorry, forgot to add:
Tested patch and it works as desired.
Thanks, I'll add a Tested-by tag then.
Johan
Quoted 74 lines · Johan Hovold
Quoted 73 lines · Mike Remski
Quoted 72 lines · Johan Hovold
Quoted 58 lines · Mike Remski
Quoted 38 lines · Johan Hovold
Quoted 1 line
From
4ddea3a573b8c15beefb67bc35c440850063d79dMon Sep 17 00:00:00 2001From: Johan Hovold <[email protected]>
Date: Wed, 4 Jun 2014 14:09:43 +0200
Subject: [PATCH 1/5] USB:ftdi_sio: fix null deref at port probeFix NULL-pointer dereference when probing an interface with no endpoints.
These devices have two bulk endpoints per interface, but this avoids crashing the kernel if a user forces a non-FTDI device to be probed.
Note that the iterator variable was made unsigned in order to avoid a maybe-uninitialized compiler warning for
ep_descafter the loop.Fixes 895f28badce9 ("USB: ftdi_sio: fix hi-speed device packet sizecalculation")
Reported-by Mike Remski <[email protected]>Cc <[email protected]> # 2.3.61Signed-off-by Johan Hovold <[email protected]>--- drivers/usb/serial/ftdi_sio.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)drivers/usb/serial/ftdi_sio.c +2
-2@@ -1564,14 +1564,17 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port)struct usb_device *udev = serial->dev;struct usb_interface *interface = serial->interface; -struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1 ].desc; +struct usb_endpoint_descriptor *ep_desc;unsigned num_endpoints; -int i; +unsigned i;drivers/usb/serial/ftdi_sio.c static void ftdi_set_max_packet_size(struct usb_serial_port *port) · line 1580
Quoted 10 lines
drivers/usb/serial/ftdi_sio.c +3
-0num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;dev_info (&udev->dev,"Number of endpoints %d\n" , num_endpoints); +if (!num_endpoints) +return ; +/* NOTE: some customers have programmed FT232R/FT245R devices * with an endpoint size of 0 - not good. In this case, we * want to override the endpoint descriptor setting and use a Thanks Johan. I tried to get the
cdc_acmworking; did not have much luck/time (typical overcommit on workload) I will retry with the commit mentioned.
I will try the patch today and get back to you. Nice on theep_desc:
looking at the codepriv->max_packet_sizeis attached to the port, your change would use the last thing off of cur_altsetting->endpoint[], but I'm wondering if we should actually be settingpriv->max_packet_sizeto whatever the max is of all endpoint[].desc->wMaxPacketSize?Quoted 1 line
Thoughts?
This is the exact same behaviour as the old code (minus the NULL-deref).
These device have two bulk endpoints per interface and they are supposed to be using the same max packet size (64 or 512 depending on device and host).
This value is also used during depacketisation of incoming data (and packetisation of outgoing data for legacy devices). I'm pretty convinced you're using the wrong driver, something which would lead to corruption of incoming data when the (non-existing) status bytes are stripped from the stream.
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
You really should try cdc-acm.
Johan
Sorry, forgot to add:
Tested patch and it works as desired.Thanks, I'll add a Tested-by tag then.
Johan
Thanks for quick response. I'll let you know the results of cdc-acm (had to pull in the commit you mentioned).
Signature · 2 lines
Office: (978)401-4032 (x123 internally) Cell: (603) 759-6953
Quoted 74 lines · Johan Hovold
Quoted 73 lines · Mike Remski
Quoted 72 lines · Johan Hovold
Quoted 58 lines · Mike Remski
Quoted 38 lines · Johan Hovold
Quoted 1 line
From
4ddea3a573b8c15beefb67bc35c440850063d79dMon Sep 17 00:00:00 2001From: Johan Hovold <[email protected]>
Date: Wed, 4 Jun 2014 14:09:43 +0200
Subject: [PATCH 1/5] USB:ftdi_sio: fix null deref at port probeFix NULL-pointer dereference when probing an interface with no endpoints.
These devices have two bulk endpoints per interface, but this avoids crashing the kernel if a user forces a non-FTDI device to be probed.
Note that the iterator variable was made unsigned in order to avoid a maybe-uninitialized compiler warning for
ep_descafter the loop.Fixes 895f28badce9 ("USB: ftdi_sio: fix hi-speed device packet sizecalculation")
Reported-by Mike Remski <[email protected]>Cc <[email protected]> # 2.3.61Signed-off-by Johan Hovold <[email protected]>--- drivers/usb/serial/ftdi_sio.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)drivers/usb/serial/ftdi_sio.c +2
-2@@ -1564,14 +1564,17 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port)struct usb_device *udev = serial->dev;struct usb_interface *interface = serial->interface; -struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1 ].desc; +struct usb_endpoint_descriptor *ep_desc;unsigned num_endpoints; -int i; +unsigned i;drivers/usb/serial/ftdi_sio.c static void ftdi_set_max_packet_size(struct usb_serial_port *port) · line 1580
Quoted 10 lines
drivers/usb/serial/ftdi_sio.c +3
-0num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;dev_info (&udev->dev,"Number of endpoints %d\n" , num_endpoints); +if (!num_endpoints) +return ; +/* NOTE: some customers have programmed FT232R/FT245R devices * with an endpoint size of 0 - not good. In this case, we * want to override the endpoint descriptor setting and use a Thanks Johan. I tried to get the
cdc_acmworking; did not have much luck/time (typical overcommit on workload) I will retry with the commit mentioned.
I will try the patch today and get back to you. Nice on theep_desc:
looking at the codepriv->max_packet_sizeis attached to the port, your change would use the last thing off of cur_altsetting->endpoint[], but I'm wondering if we should actually be settingpriv->max_packet_sizeto whatever the max is of all endpoint[].desc->wMaxPacketSize?Quoted 1 line
Thoughts?
This is the exact same behaviour as the old code (minus the NULL-deref).
These device have two bulk endpoints per interface and they are supposed to be using the same max packet size (64 or 512 depending on device and host).
This value is also used during depacketisation of incoming data (and packetisation of outgoing data for legacy devices). I'm pretty convinced you're using the wrong driver, something which would lead to corruption of incoming data when the (non-existing) status bytes are stripped from the stream.
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
You really should try cdc-acm.
Johan
Sorry, forgot to add:
Tested patch and it works as desired.Thanks, I'll add a Tested-by tag then.
Johan
Ok, had a chance to try the cdc-acm; yes it's the ancient one that is in the base install of CentOS 6.4 (2.6.32-71.29.1 centos patched). I'm hitting something similar; I noticed there where a few commits for NULL pointer dereferences in cdc-acm.c.
I'll poke into this a bit (yes, I know try a newer kernel, etc) and let you know what I find (or perhaps this looks similar to something already seen?). This device is the same as the original ftdi crash, 1.2 is the same interface with bNumEndpoints == 0.
Jun 4 11:35:20 nicA91A84 kernel: cdc_acm 5-2:1.2: This device cannot do calls on its own. It is not a modem. Jun 4 11:35:20 nicA91A84 kernel: BUG: unable to handle kernel NULL pointer dereference at 00000004 Jun 4 11:35:20 nicA91A84 kernel: IP: [<f84f9c9e>] acm_probe+0x44e/0x127c [cdc_acm] Jun 4 11:35:20 nicA91A84 kernel: *pdpt = 00000000354eb001 *pde = 000000007f003067 Jun 4 11:35:20 nicA91A84 kernel: Oops: 0000 [#1] SMP Jun 4 11:35:20 nicA91A84 kernel: last sysfs file: /sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2/product
Signature · 2 lines
Office: (978)401-4032 (x123 internally) Cell: (603) 759-6953
Quoted 20 lines · Mike Remski
Ok, had a chance to try the cdc-acm; yes it's the ancient one that is in the base install of CentOS 6.4 (2.6.32-71.29.1 centos patched). I'm hitting something similar; I noticed there where a few commits for NULL pointer dereferences in
cdc-acm.c.I'll poke into this a bit (yes, I know try a newer kernel, etc) and let you know what I find (or perhaps this looks similar to something already seen?). This device is the same as the original ftdi crash, 1.2 is the same interface with bNumEndpoints == 0.
Jun 4 11:35:20 nicA91A84 kernel: cdc_acm 5-2:1.2: This device cannot do calls on its own. It is not a modem. Jun 4 11:35:20 nicA91A84 kernel: BUG: unable to handle kernel NULL pointer dereference at 00000004 Jun 4 11:35:20 nicA91A84 kernel: IP: [<f84f9c9e>] acm_probe+0x44e/0x127c [cdc_acm] Jun 4 11:35:20 nicA91A84 kernel: *pdpt = 00000000354eb001 *pde = 000000007f003067 Jun 4 11:35:20 nicA91A84 kernel: Oops: 0000 [#1] SMP Jun 4 11:35:20 nicA91A84 kernel: last sysfs file:
Quoted 1 line
/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2/product
Yeah, you really need to update your kernel. You'll definitely need at least commit 99f347caa456 ("USB: CDC ACM: Fix NULL pointer dereference").
No more reports until you've tried a recent kernel, ok? ;)
Johan
Quoted 22 lines · Johan Hovold
Quoted 20 lines · Mike Remski
Ok, had a chance to try the cdc-acm; yes it's the ancient one that is in the base install of CentOS 6.4 (2.6.32-71.29.1 centos patched). I'm hitting something similar; I noticed there where a few commits for NULL pointer dereferences in
cdc-acm.c.I'll poke into this a bit (yes, I know try a newer kernel, etc) and let you know what I find (or perhaps this looks similar to something already seen?). This device is the same as the original ftdi crash, 1.2 is the same interface with bNumEndpoints == 0.
Jun 4 11:35:20 nicA91A84 kernel: cdc_acm 5-2:1.2: This device cannot do calls on its own. It is not a modem. Jun 4 11:35:20 nicA91A84 kernel: BUG: unable to handle kernel NULL pointer dereference at 00000004 Jun 4 11:35:20 nicA91A84 kernel: IP: [<f84f9c9e>] acm_probe+0x44e/0x127c [cdc_acm] Jun 4 11:35:20 nicA91A84 kernel: *pdpt = 00000000354eb001 *pde = 000000007f003067 Jun 4 11:35:20 nicA91A84 kernel: Oops: 0000 [#1] SMP Jun 4 11:35:20 nicA91A84 kernel: last sysfs file:Quoted 1 line
/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2/product
Quoted 7 lines
Yeah, you really need to update your kernel. You'll definitely need at least commit
99f347caa456("USB: CDC ACM: Fix NULL pointer dereference").No more reports until you've tried a recent kernel, ok? ;)
Johan
Agreed. But I still have to understand it so I can backport the appropriate fixes, no? I'll be quiet now.
Signature · 2 lines
Office: (978)401-4032 (x123 internally) Cell: (603) 759-6953
Quoted 22 lines · Johan Hovold
Quoted 20 lines · Mike Remski
Ok, had a chance to try the cdc-acm; yes it's the ancient one that is in the base install of CentOS 6.4 (2.6.32-71.29.1 centos patched). I'm hitting something similar; I noticed there where a few commits for NULL pointer dereferences in
cdc-acm.c.I'll poke into this a bit (yes, I know try a newer kernel, etc) and let you know what I find (or perhaps this looks similar to something already seen?). This device is the same as the original ftdi crash, 1.2 is the same interface with bNumEndpoints == 0.
Jun 4 11:35:20 nicA91A84 kernel: cdc_acm 5-2:1.2: This device cannot do calls on its own. It is not a modem. Jun 4 11:35:20 nicA91A84 kernel: BUG: unable to handle kernel NULL pointer dereference at 00000004 Jun 4 11:35:20 nicA91A84 kernel: IP: [<f84f9c9e>] acm_probe+0x44e/0x127c [cdc_acm] Jun 4 11:35:20 nicA91A84 kernel: *pdpt = 00000000354eb001 *pde = 000000007f003067 Jun 4 11:35:20 nicA91A84 kernel: Oops: 0000 [#1] SMP Jun 4 11:35:20 nicA91A84 kernel: last sysfs file:Quoted 1 line
/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2/product
Quoted 7 lines
Yeah, you really need to update your kernel. You'll definitely need at least commit
99f347caa456("USB: CDC ACM: Fix NULL pointer dereference").No more reports until you've tried a recent kernel, ok? ;)
Johan
Device in question does not cause kernel crash when using the cdc-acm driver on a Fedora 19 system running Fedora kernel 3.9.5-301.
Thanks for all the help, I'll take care of my ancient kernels.
Signature · 2 lines
Office: (978)401-4032 (x123 internally) Cell: (603) 759-6953
Quoted 27 lines · Mike Remski
Quoted 26 lines · Johan Hovold
Quoted 20 lines · Mike Remski
Ok, had a chance to try the cdc-acm; yes it's the ancient one that is in the base install of CentOS 6.4 (2.6.32-71.29.1 centos patched). I'm hitting something similar; I noticed there where a few commits for NULL pointer dereferences in
cdc-acm.c.I'll poke into this a bit (yes, I know try a newer kernel, etc) and let you know what I find (or perhaps this looks similar to something already seen?). This device is the same as the original ftdi crash, 1.2 is the same interface with bNumEndpoints == 0.
Jun 4 11:35:20 nicA91A84 kernel: cdc_acm 5-2:1.2: This device cannot do calls on its own. It is not a modem. Jun 4 11:35:20 nicA91A84 kernel: BUG: unable to handle kernel NULL pointer dereference at 00000004 Jun 4 11:35:20 nicA91A84 kernel: IP: [<f84f9c9e>] acm_probe+0x44e/0x127c [cdc_acm] Jun 4 11:35:20 nicA91A84 kernel: *pdpt = 00000000354eb001 *pde = 000000007f003067 Jun 4 11:35:20 nicA91A84 kernel: Oops: 0000 [#1] SMP Jun 4 11:35:20 nicA91A84 kernel: last sysfs file:Quoted 1 line
/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2/product
Yeah, you really need to update your kernel. You'll definitely need at least commit
99f347caa456("USB: CDC ACM: Fix NULL pointer dereference").
Quoted 7 lines
Quoted 3 lines
No more reports until you've tried a recent kernel, ok? ;)
Johan
Device in question does not cause kernel crash when using the cdc-acm driver on a Fedora 19 system running Fedora kernel 3.9.5-301.
Thanks for all the help, I'll take care of my ancient kernels.
That's good to hear. Good luck with the backporting.
Johan