Skip to contentSkip to conversation

Trying to ping from a subinterface.

DISCUSSION CLOSE Dave 3 participants 5 messages Jun 2, 2014 – Jun 3, 2014

Subsystems (2)
lore
Share & tools
lore

CLOSE Dave

author
#0 lore raw

On Fedora 20 x86_64.

According to "man ping", ping should work from a subinterface specifying either the interface name or its address:

Quoted 5 lines

-I interface
interface is either an address, or an interface name. If inter‐ face is an address, it sets source address to specified inter‐ face address. If interface in an interface name, it sets source interface to specified interface.

I've got a subinterface and I'm trying to ping from it.

Quoted 5 lines
# ifconfig eth3:sub1
eth3:sub1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
       inet 172.17.30.143  netmask 255.255.254.0  broadcast 172.17.31.255
       ether 90:e2:ba:34:46:41  txqueuelen 1000  (Ethernet)
       device memory 0xdc7e0000-dc800000

If I ping from the address, it works as specified. If I specify the interface name instead, I see:

Quoted 2 lines
# ping -I eth3:sub1 172.17.30.1
ping: SO_BINDTODEVICE: Invalid argument

Investigating a little deeper:

Quoted 6 lines
# strace ping -I eth3:sub1 172.17.30.1
execve("/usr/bin/ping", ["ping", "-I", "eth3:sub1", "172.17.30.1"], [/* 38 vars */]) = 0
...
setsockopt(4, SOL_SOCKET, SO_BINDTODEVICE, "eth3:sub1\0", 13) = -1 ENODEV (No such device)
...
+++ exited with 2 +++

Any thoughts?

Signature · 1 line
Dave Close
#1 lore raw
Quoted 27 lines · On Mon, 2 Jun 2014 13:47:06 -0700 CLOSE Dave <[email protected]>…

On Fedora 20 x86_64.

According to "man ping", ping should work from a subinterface specifying either the interface name or its address:

Quoted 5 lines

-I interface
interface is either an address, or an interface name. If inter‐ face is an address, it sets source address to specified inter‐ face address. If interface in an interface name, it sets source interface to specified interface.

I've got a subinterface and I'm trying to ping from it.

Quoted 5 lines
# ifconfig eth3:sub1
eth3:sub1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
       inet 172.17.30.143  netmask 255.255.254.0  broadcast 172.17.31.255
       ether 90:e2:ba:34:46:41  txqueuelen 1000  (Ethernet)
       device memory 0xdc7e0000-dc800000

If I ping from the address, it works as specified. If I specify the interface name instead, I see:

Quoted 2 lines
# ping -I eth3:sub1 172.17.30.1
ping: SO_BINDTODEVICE: Invalid argument

Investigating a little deeper:

Quoted 8 lines
Quoted 6 lines
# strace ping -I eth3:sub1 172.17.30.1
execve("/usr/bin/ping", ["ping", "-I", "eth3:sub1", "172.17.30.1"], [/* 38 vars */]) = 0
...
setsockopt(4, SOL_SOCKET, SO_BINDTODEVICE, "eth3:sub1\0", 13) = -1 ENODEV (No such device)
...
+++ exited with 2 +++

Any thoughts?

Interface aliases (sub interfaces) aren't real interfaces in Linux. They are a deprecated way of doing multiple addresses on the same device. Aliases aren't real devices, they don't behave like devices, and they only are useful with ancient tools like ifconfig.

Don't use them unless you have to deal with systems older than 10 years.

author
#2 lore raw

Stephen Hemminger wrote (in response to my complaint):

Quoted 10 lines
Quoted 2 lines
Quoted 2 lines
# ping -I eth3:sub1 172.17.30.1
ping: SO_BINDTODEVICE: Invalid argument

Interface aliases (sub interfaces) aren't real interfaces in Linux. They are a deprecated way of doing multiple addresses on the same device. Aliases aren't real devices, they don't behave like devices, and they only are useful with ancient tools like ifconfig.

Don't use them unless you have to deal with systems older than 10 years.

I apologize to the group. I had been led to believe this was working on earlier Fedora releases. In fact, it was complaining but then falling back to the main interface and performing the ping anyway. What is new is the refusal to fall back.

Starting fresh, I'd agree with your suggestion. But there is a lot of legacy code in the world...

Signature · 1 line
Dave Close
#3 lore raw
Quoted 13 lines · CLOSE Dave

Stephen Hemminger wrote (in response to my complaint):

Quoted 10 lines
Quoted 2 lines
Quoted 2 lines
# ping -I eth3:sub1 172.17.30.1
ping: SO_BINDTODEVICE: Invalid argument

Interface aliases (sub interfaces) aren't real interfaces in Linux. They are a deprecated way of doing multiple addresses on the same device. Aliases aren't real devices, they don't behave like devices, and they only are useful with ancient tools like ifconfig.

Don't use them unless you have to deal with systems older than 10 years.

Quoted 7 lines

I apologize to the group. I had been led to believe this was working on earlier Fedora releases. In fact, it was complaining but then falling back to the main interface and performing the ping anyway. What is new is the refusal to fall back.

Starting fresh, I'd agree with your suggestion. But there is a lot of legacy code in the world...

SO_BINDTODEVICE could never work on sub-interfaces as far as I know, but maybe older versions of ping just didn't bother doing SO_BINDTODEVICE.

Do you actually need sub-interfaces for some reason, or can you just use multiple IPs on one interface (or maybe mac-vlans)?

Thanks,
Ben

Signature · 2 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com
author
#4 lore raw
Quoted 4 lines · I wrote:

I apologize to the group. I had been led to believe this was working on earlier Fedora releases. In fact, it was complaining but then falling back to the main interface and performing the ping anyway. What is new is the refusal to fall back.

Ben Greear answered:

Quoted 2 lines

SO_BINDTODEVICE could never work on sub-interfaces as far as I know, but maybe older versions of ping just didn't bother doing SO_BINDTODEVICE.

It appears that the older version tried the call, got a failure, complained about it, and then continued by using the main interface instead. The exit code was not affected.

The current version tries the call, fails, complains, and exits with code 2.

Quoted 2 lines

Do you actually need sub-interfaces for some reason, or can you just use multiple IPs on one interface (or maybe mac-vlans)?

I can live without them. But they do provide a nice way to reference an address by name.

Signature · 1 line
Dave Close