arm: shmobile: r8a7790: add USB3.0 node to r8a7790.dtsi
Subsystems (2)
PATCH v2 2/2 arm: shmobile: r8a7790: add USB3.0 node to r8a7790.dtsi
This node depends on a generic phy driver of usb.
Signed-off-by Yoshihiro Shimoda <[email protected]>
--- arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/arm/boot/dts/r8a7790.dtsi +10 -0
@@ -902,4 +902,14 @@ #size-cells = <0>; status = "disabled"; }; + + xhci: usb at ee000000 { + compatible = "renesas,xhci-r8a7790"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; + phys = <&usbphy 1 1>; + phy-names = "usb"; + status = "disabled"; + }; };
Signature · 1 line
1.7.9.5
PATCH v2 2/2 arm: shmobile: r8a7790: add USB3.0 node to r8a7790.dtsi
Quoted 3 lines · Yoshihiro Shimoda
This node depends on a generic phy driver of usb.
Signed-off-by Yoshihiro Shimoda <[email protected]>
I think it would be best if you resubmitted this patch once the driver has been accepted. Likewise for the r8a7791 variant of this patch.
Quoted 26 lines
--- arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)arch/arm/boot/dts/r8a7790.dtsi +10
-0@@ -902,4 +902,14 @@ #size-cells = <0>; status = "disabled"; }; + + xhci: usb at ee000000 { + compatible = "renesas,xhci-r8a7790"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; + phys = <&usbphy 1 1>; + phy-names = "usb"; + status = "disabled"; + }; };Signature · 1 line
1.7.9.5