Skip to contentSkip to conversation

Live images?

DISCUSSION Gary Thomas 2 participants 11 messages Jun 5, 2014 – Jun 16, 2014

lore
Share & tools
lore
#0 lore raw

Looking through the Poky/Yocto sources, there seems to be some support for Live CD/USB images. However, I can't find any examples nor documentation for how to use this.

Can anyone provide some pointers?

Thanks

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#1 lore raw

Hi Gary,

Quoted 5 lines · On Thursday 05 June 2014 07:07:34 Gary Thomas wrote:

Looking through the Poky/Yocto sources, there seems to be some support for Live CD/USB images. However, I can't find any examples nor documentation for how to use this.

Can anyone provide some pointers?

You're right, we seem to be missing that in our documentation; I'm not sure where the best place to document it would be though.

FYI, you should just need to ensure "live" is in IMAGE_FSTYPES; then you should get a .directdisk image that you can just dd to a USB stick.

Cheers,
Paul

Signature · 2 lines
Paul Eggleton
Intel Open Source Technology Centre
#2 lore raw
Quoted 7 lines · On Thursday 05 June 2014 15:26:28 Paul Eggleton wrote:

Hi Gary,

Quoted 4 lines · On Thursday 05 June 2014 07:07:34 Gary Thomas wrote:

Looking through the Poky/Yocto sources, there seems to be some support for Live CD/USB images. However, I can't find any examples nor documentation for how to use this.

Quoted 7 lines
Quoted 1 line

Can anyone provide some pointers?

You're right, we seem to be missing that in our documentation; I'm not sure where the best place to document it would be though.

FYI, you should just need to ensure "live" is in IMAGE_FSTYPES; then you should get a .directdisk image that you can just dd to a USB stick.

Of course I meant to say .hddimg, not .directdisk.

Cheers,
Paul

Signature · 2 lines
Paul Eggleton
Intel Open Source Technology Centre
#3 lore raw
Quoted 10 lines · Paul Eggleton
Quoted 9 lines · On Thursday 05 June 2014 15:26:28 Paul Eggleton wrote:

Hi Gary,

Quoted 5 lines · On Thursday 05 June 2014 07:07:34 Gary Thomas wrote:

Looking through the Poky/Yocto sources, there seems to be some support for Live CD/USB images. However, I can't find any examples nor documentation for how to use this.

Can anyone provide some pointers?

Quoted 7 lines
Quoted 5 lines

You're right, we seem to be missing that in our documentation; I'm not sure where the best place to document it would be though.

FYI, you should just need to ensure "live" is in IMAGE_FSTYPES; then you should get a .directdisk image that you can just dd to a USB stick.

Of course I meant to say .hddimg, not .directdisk.

Thanks, I'll give that a try.

What if I needed to boot from an actual CD? I have an old box here I'd like to try, but it doesn't boot from USB.

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#4 lore raw
Quoted 18 lines · On Thursday 05 June 2014 08:41:57 Gary Thomas wrote:
Quoted 17 lines · Paul Eggleton
Quoted 15 lines · On Thursday 05 June 2014 15:26:28 Paul Eggleton wrote:

Hi Gary,

Quoted 5 lines · On Thursday 05 June 2014 07:07:34 Gary Thomas wrote:

Looking through the Poky/Yocto sources, there seems to be some support for Live CD/USB images. However, I can't find any examples nor documentation for how to use this.

Can anyone provide some pointers?

You're right, we seem to be missing that in our documentation; I'm not sure
where the best place to document it would be though.

FYI, you should just need to ensure "live" is in IMAGE_FSTYPES; then you should get a .directdisk image that you can just dd to a USB stick.

Quoted 6 lines
Quoted 1 line

Of course I meant to say .hddimg, not .directdisk.

Thanks, I'll give that a try.

What if I needed to boot from an actual CD? I have an old box here I'd like to try, but it doesn't boot from USB.

We can produce ISO images but I don't think that they work quite as well, e.g.:

https://bugzilla.yoctoproject.org/show_bug.cgi?id=5282

You could always try it though.

Cheers,
Paul

Signature · 2 lines
Paul Eggleton
Intel Open Source Technology Centre
#5 lore raw
Quoted 26 lines · Paul Eggleton
Quoted 18 lines · On Thursday 05 June 2014 08:41:57 Gary Thomas wrote:
Quoted 17 lines · Paul Eggleton
Quoted 15 lines · On Thursday 05 June 2014 15:26:28 Paul Eggleton wrote:

Hi Gary,

Quoted 5 lines · On Thursday 05 June 2014 07:07:34 Gary Thomas wrote:

Looking through the Poky/Yocto sources, there seems to be some support for Live CD/USB images. However, I can't find any examples nor documentation for how to use this.

Can anyone provide some pointers?

You're right, we seem to be missing that in our documentation; I'm not sure
where the best place to document it would be though.

FYI, you should just need to ensure "live" is in IMAGE_FSTYPES; then you should get a .directdisk image that you can just dd to a USB stick.

Quoted 6 lines
Quoted 1 line

Of course I meant to say .hddimg, not .directdisk.

Thanks, I'll give that a try.

What if I needed to boot from an actual CD? I have an old box here I'd like to try, but it doesn't boot from USB.

Quoted 6 lines

We can produce ISO images but I don't think that they work quite as well, e.g.:

https://bugzilla.yoctoproject.org/show_bug.cgi?id=5282

You could always try it though.

Bummer, when I tried to build core-image-minimal and/or core-image-x11, it failed:

| DEBUG: Executing shell function read_only_rootfs_hook
| sed: can't read /home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image-minimal-initramfs/1.0-r0/rootfs/etc/fstab: No such file or directory
| WARNING: /home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image-minimal-initramfs/1.0-r0/temp/run.read_only_rootfs_hook.30446:1 exit 2 from
|   sed -i -e '/^[#[:space:]]*\/dev\/root/{s/defaults/ro/;s/\([[:space:]]*[[:digit:]]\)\([[:space:]]*\)[[:digit:]]$/\1\20/}' /home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image-minimal-initramfs/1.0-r0/rootfs/etc/fstab
| DEBUG: Python function do_rootfs finished
| ERROR: Function failed: read_only_rootfs_hook (log file is located at /home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image-minimal-initramfs/1.0-r0/temp/log.do_rootfs.30446)

Using these settings:
Build Configuration:

BB_VERSION        = "1.23.1"
BUILD_SYS         = "i686-linux"
NATIVELSBSTRING   = "Fedora-13"
TARGET_SYS        = "i586-poky-linux"
MACHINE           = "genericx86"
DISTRO            = "poky"
DISTRO_VERSION    = "1.6+snapshot-20140605"
TUNE_FEATURES     = "m32 core2"
TARGET_FPU        = ""

meta
meta-yocto
meta-yocto-bsp = "master:e7114046be6e71fb326477dc882adb814ef6a751"

Extra settings in conf/local.conf
# Live CD setup
IMAGE_FSTYPES_append = " hddimg live" IMAGE_FEATURES_append = " read-only-rootfs" CORE_IMAGE_EXTRA_INSTALL_append = " python python-modules"

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#6 lore raw
Quoted 28 lines · On Thursday 05 June 2014 11:16:55 Gary Thomas wrote:
Quoted 27 lines · Paul Eggleton
Quoted 25 lines · On Thursday 05 June 2014 08:41:57 Gary Thomas wrote:
Quoted 14 lines · Paul Eggleton
Quoted 13 lines · On Thursday 05 June 2014 15:26:28 Paul Eggleton wrote:

Hi Gary,

Quoted 5 lines · On Thursday 05 June 2014 07:07:34 Gary Thomas wrote:

Looking through the Poky/Yocto sources, there seems to be some support for Live CD/USB images. However, I can't find any examples nor documentation for how to use this.

Can anyone provide some pointers?

You're right, we seem to be missing that in our documentation; I'm not sure
where the best place to document it would be though.

Quoted 5 lines
Quoted 3 lines

FYI, you should just need to ensure "live" is in IMAGE_FSTYPES; then you
should get a .directdisk image that you can just dd to a USB stick.

Of course I meant to say .hddimg, not .directdisk.

Thanks, I'll give that a try.

What if I needed to boot from an actual CD? I have an old box here I'd like to try, but it doesn't boot from USB.

Quoted 8 lines
Quoted 6 lines

We can produce ISO images but I don't think that they work quite as well, e.g.:

https://bugzilla.yoctoproject.org/show_bug.cgi?id=5282

You could always try it though.

Bummer, when I tried to build core-image-minimal and/or core-image-x11, it

failed:

Quoted 30 lines
| DEBUG: Executing shell function read_only_rootfs_hook
| sed: can't read
| /home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image
| -minimal-initramfs/1.0-r0/rootfs/etc/fstab: No such file or directory
| WARNING:
| /home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image
| -minimal-initramfs/1.0-r0/temp/run.read_only_rootfs_hook.30446:1 exit 2
| from| 
|   sed -i -e
|   '/^[#[:space:]]*\/dev\/root/{s/defaults/ro/;s/\([[:space:]]*[[:digit:]]
|   \)\([[:space:]]*\)[[:digit:]]$/\1\20/}'

/home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image-mi nimal-initramfs/1.0-r0/rootfs/etc/fstab
| DEBUG: Python function do_rootfs finished
| ERROR: Function failed: read_only_rootfs_hook (log file is located at

/home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image-mi nimal-initramfs/1.0-r0/temp/log.do_rootfs.30446)

Using these settings:
Build Configuration:

BB_VERSION        = "1.23.1"
BUILD_SYS         = "i686-linux"
NATIVELSBSTRING   = "Fedora-13"
TARGET_SYS        = "i586-poky-linux"
MACHINE           = "genericx86"
DISTRO            = "poky"
DISTRO_VERSION    = "1.6+snapshot-20140605"
TUNE_FEATURES     = "m32 core2"
TARGET_FPU        = ""
Quoted 7 lines

meta
meta-yocto
meta-yocto-bsp = "master:e7114046be6e71fb326477dc882adb814ef6a751"

Extra settings in conf/local.conf
# Live CD setup
IMAGE_FSTYPES_append = " hddimg live"

"hddimg" isn't a valid IMAGE_FSTYPES item.

Also, try IMAGE_FSTYPES += rather than _append, that allows the initramfs image to have its own value (because it's not really valid to make a live initramfs...)

Quoted 1 line

IMAGE_FEATURES_append = " read-only-rootfs"

Try EXTRA_IMAGE_FEATURES += instead of IMAGE_FEATURES_append

Cheers,
Paul

Signature · 2 lines
Paul Eggleton
Intel Open Source Technology Centre
#7 lore raw
Quoted 76 lines · Paul Eggleton
Quoted 28 lines · On Thursday 05 June 2014 11:16:55 Gary Thomas wrote:
Quoted 27 lines · Paul Eggleton
Quoted 25 lines · On Thursday 05 June 2014 08:41:57 Gary Thomas wrote:
Quoted 14 lines · Paul Eggleton
Quoted 13 lines · On Thursday 05 June 2014 15:26:28 Paul Eggleton wrote:

Hi Gary,

Quoted 5 lines · On Thursday 05 June 2014 07:07:34 Gary Thomas wrote:

Looking through the Poky/Yocto sources, there seems to be some support for Live CD/USB images. However, I can't find any examples nor documentation for how to use this.

Can anyone provide some pointers?

You're right, we seem to be missing that in our documentation; I'm not sure
where the best place to document it would be though.

Quoted 5 lines
Quoted 3 lines

FYI, you should just need to ensure "live" is in IMAGE_FSTYPES; then you
should get a .directdisk image that you can just dd to a USB stick.

Of course I meant to say .hddimg, not .directdisk.

Thanks, I'll give that a try.

What if I needed to boot from an actual CD? I have an old box here I'd like to try, but it doesn't boot from USB.

Quoted 8 lines
Quoted 6 lines

We can produce ISO images but I don't think that they work quite as well, e.g.:

https://bugzilla.yoctoproject.org/show_bug.cgi?id=5282

You could always try it though.

Bummer, when I tried to build core-image-minimal and/or core-image-x11, it

failed:

Quoted 30 lines
| DEBUG: Executing shell function read_only_rootfs_hook
| sed: can't read
| /home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image
| -minimal-initramfs/1.0-r0/rootfs/etc/fstab: No such file or directory
| WARNING:
| /home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image
| -minimal-initramfs/1.0-r0/temp/run.read_only_rootfs_hook.30446:1 exit 2
| from|
|   sed -i -e
|   '/^[#[:space:]]*\/dev\/root/{s/defaults/ro/;s/\([[:space:]]*[[:digit:]]
|   \)\([[:space:]]*\)[[:digit:]]$/\1\20/}'

/home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image-mi nimal-initramfs/1.0-r0/rootfs/etc/fstab
| DEBUG: Python function do_rootfs finished
| ERROR: Function failed: read_only_rootfs_hook (log file is located at

/home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image-mi nimal-initramfs/1.0-r0/temp/log.do_rootfs.30446)

Using these settings:
Build Configuration:

BB_VERSION        = "1.23.1"
BUILD_SYS         = "i686-linux"
NATIVELSBSTRING   = "Fedora-13"
TARGET_SYS        = "i586-poky-linux"
MACHINE           = "genericx86"
DISTRO            = "poky"
DISTRO_VERSION    = "1.6+snapshot-20140605"
TUNE_FEATURES     = "m32 core2"
TARGET_FPU        = ""
Quoted 7 lines

meta
meta-yocto
meta-yocto-bsp = "master:e7114046be6e71fb326477dc882adb814ef6a751"

Extra settings in conf/local.conf
# Live CD setup
IMAGE_FSTYPES_append = " hddimg live"

Quoted 5 lines

"hddimg" isn't a valid IMAGE_FSTYPES item.

Also, try IMAGE_FSTYPES += rather than _append, that allows the initramfs image to have its own value (because it's not really valid to make a live initramfs...)

Sorry, I misread/misapplied your previous suggestions.

Quoted 4 lines
Quoted 2 lines

IMAGE_FEATURES_append = " read-only-rootfs"

Try EXTRA_IMAGE_FEATURES += instead of IMAGE_FEATURES_append

I've changed both of these and it still fails if I enable the read-only-rootfs.

If I leave that option out, I can build an .hddimg which I dd'd to my USB stick. It tried to boot, finds /vmlinuz but fails to find /initrd

My local.conf settings are now:
# Live CD setup
IMAGE_FSTYPES += " live"
#IMAGE_FEATURES += " read-only-rootfs" CORE_IMAGE_EXTRA_INSTALL += " python-core python-modules"

Finally, during one of my builds, I ended up with a core-image-minimal*.iso I tried burning this to a CD an it booted up, albeit with a couple of complaints about a read-only rootfs. Sadly, I no longer get any .iso results when I 'bitbake core-image-minimal'

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#8 lore raw
Quoted 103 lines · Gary Thomas
Quoted 76 lines · Paul Eggleton
Quoted 28 lines · On Thursday 05 June 2014 11:16:55 Gary Thomas wrote:
Quoted 27 lines · Paul Eggleton
Quoted 25 lines · On Thursday 05 June 2014 08:41:57 Gary Thomas wrote:
Quoted 14 lines · Paul Eggleton
Quoted 13 lines · On Thursday 05 June 2014 15:26:28 Paul Eggleton wrote:

Hi Gary,

Quoted 5 lines · On Thursday 05 June 2014 07:07:34 Gary Thomas wrote:

Looking through the Poky/Yocto sources, there seems to be some support for Live CD/USB images. However, I can't find any examples nor documentation for how to use this.

Can anyone provide some pointers?

You're right, we seem to be missing that in our documentation; I'm not sure
where the best place to document it would be though.

Quoted 5 lines
Quoted 3 lines

FYI, you should just need to ensure "live" is in IMAGE_FSTYPES; then you
should get a .directdisk image that you can just dd to a USB stick.

Of course I meant to say .hddimg, not .directdisk.

Thanks, I'll give that a try.

What if I needed to boot from an actual CD? I have an old box here I'd like to try, but it doesn't boot from USB.

Quoted 8 lines
Quoted 6 lines

We can produce ISO images but I don't think that they work quite as well, e.g.:

https://bugzilla.yoctoproject.org/show_bug.cgi?id=5282

You could always try it though.

Bummer, when I tried to build core-image-minimal and/or core-image-x11, it

failed:

Quoted 30 lines
| DEBUG: Executing shell function read_only_rootfs_hook
| sed: can't read
| /home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image
| -minimal-initramfs/1.0-r0/rootfs/etc/fstab: No such file or directory
| WARNING:
| /home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image
| -minimal-initramfs/1.0-r0/temp/run.read_only_rootfs_hook.30446:1 exit 2
| from|
|   sed -i -e
|   '/^[#[:space:]]*\/dev\/root/{s/defaults/ro/;s/\([[:space:]]*[[:digit:]]
|   \)\([[:space:]]*\)[[:digit:]]$/\1\20/}'

/home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image-mi nimal-initramfs/1.0-r0/rootfs/etc/fstab
| DEBUG: Python function do_rootfs finished
| ERROR: Function failed: read_only_rootfs_hook (log file is located at

/home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image-mi nimal-initramfs/1.0-r0/temp/log.do_rootfs.30446)

Using these settings:
Build Configuration:

BB_VERSION        = "1.23.1"
BUILD_SYS         = "i686-linux"
NATIVELSBSTRING   = "Fedora-13"
TARGET_SYS        = "i586-poky-linux"
MACHINE           = "genericx86"
DISTRO            = "poky"
DISTRO_VERSION    = "1.6+snapshot-20140605"
TUNE_FEATURES     = "m32 core2"
TARGET_FPU        = ""
Quoted 7 lines

meta
meta-yocto
meta-yocto-bsp = "master:e7114046be6e71fb326477dc882adb814ef6a751"

Extra settings in conf/local.conf
# Live CD setup
IMAGE_FSTYPES_append = " hddimg live"

Quoted 5 lines

"hddimg" isn't a valid IMAGE_FSTYPES item.

Also, try IMAGE_FSTYPES += rather than _append, that allows the initramfs image to have its own value (because it's not really valid to make a live initramfs...)

Sorry, I misread/misapplied your previous suggestions.

Quoted 4 lines
Quoted 2 lines

IMAGE_FEATURES_append = " read-only-rootfs"

Try EXTRA_IMAGE_FEATURES += instead of IMAGE_FEATURES_append

I've changed both of these and it still fails if I enable the read-only-rootfs.

If I leave that option out, I can build an .hddimg which I dd'd to my USB stick. It tried to boot, finds /vmlinuz but fails to find /initrd

My local.conf settings are now:
# Live CD setup
IMAGE_FSTYPES += " live"
#IMAGE_FEATURES += " read-only-rootfs" CORE_IMAGE_EXTRA_INSTALL += " python-core python-modules"

Quoted 5 lines

Finally, during one of my builds, I ended up with a core-image-minimal*.iso I tried burning this to a CD an it booted up, albeit with a couple of complaints about a read-only rootfs. Sadly, I no longer get any .iso results when I 'bitbake core-image-minimal'

BTW, I tried this with daisy and the CD version (read-only) worked just fine for me - the ISO and .hddimg files built with no errors.

I'm bisecting now to see what broke...

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#9 lore raw
Quoted 110 lines · Gary Thomas
Quoted 103 lines · Gary Thomas
Quoted 76 lines · Paul Eggleton
Quoted 28 lines · On Thursday 05 June 2014 11:16:55 Gary Thomas wrote:
Quoted 27 lines · Paul Eggleton
Quoted 25 lines · On Thursday 05 June 2014 08:41:57 Gary Thomas wrote:
Quoted 14 lines · Paul Eggleton
Quoted 13 lines · On Thursday 05 June 2014 15:26:28 Paul Eggleton wrote:

Hi Gary,

Quoted 5 lines · On Thursday 05 June 2014 07:07:34 Gary Thomas wrote:

Looking through the Poky/Yocto sources, there seems to be some support for Live CD/USB images. However, I can't find any examples nor documentation for how to use this.

Can anyone provide some pointers?

You're right, we seem to be missing that in our documentation; I'm not sure
where the best place to document it would be though.

Quoted 5 lines
Quoted 3 lines

FYI, you should just need to ensure "live" is in IMAGE_FSTYPES; then you
should get a .directdisk image that you can just dd to a USB stick.

Of course I meant to say .hddimg, not .directdisk.

Thanks, I'll give that a try.

What if I needed to boot from an actual CD? I have an old box here I'd like to try, but it doesn't boot from USB.

Quoted 8 lines
Quoted 6 lines

We can produce ISO images but I don't think that they work quite as well, e.g.:

https://bugzilla.yoctoproject.org/show_bug.cgi?id=5282

You could always try it though.

Bummer, when I tried to build core-image-minimal and/or core-image-x11, it

failed:

Quoted 30 lines
| DEBUG: Executing shell function read_only_rootfs_hook
| sed: can't read
| /home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image
| -minimal-initramfs/1.0-r0/rootfs/etc/fstab: No such file or directory
| WARNING:
| /home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image
| -minimal-initramfs/1.0-r0/temp/run.read_only_rootfs_hook.30446:1 exit 2
| from|
|   sed -i -e
|   '/^[#[:space:]]*\/dev\/root/{s/defaults/ro/;s/\([[:space:]]*[[:digit:]]
|   \)\([[:space:]]*\)[[:digit:]]$/\1\20/}'

/home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image-mi nimal-initramfs/1.0-r0/rootfs/etc/fstab
| DEBUG: Python function do_rootfs finished
| ERROR: Function failed: read_only_rootfs_hook (log file is located at

/home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image-mi nimal-initramfs/1.0-r0/temp/log.do_rootfs.30446)

Using these settings:
Build Configuration:

BB_VERSION        = "1.23.1"
BUILD_SYS         = "i686-linux"
NATIVELSBSTRING   = "Fedora-13"
TARGET_SYS        = "i586-poky-linux"
MACHINE           = "genericx86"
DISTRO            = "poky"
DISTRO_VERSION    = "1.6+snapshot-20140605"
TUNE_FEATURES     = "m32 core2"
TARGET_FPU        = ""
Quoted 7 lines

meta
meta-yocto
meta-yocto-bsp = "master:e7114046be6e71fb326477dc882adb814ef6a751"

Extra settings in conf/local.conf
# Live CD setup
IMAGE_FSTYPES_append = " hddimg live"

Quoted 5 lines

"hddimg" isn't a valid IMAGE_FSTYPES item.

Also, try IMAGE_FSTYPES += rather than _append, that allows the initramfs image to have its own value (because it's not really valid to make a live initramfs...)

Sorry, I misread/misapplied your previous suggestions.

Quoted 4 lines
Quoted 2 lines

IMAGE_FEATURES_append = " read-only-rootfs"

Try EXTRA_IMAGE_FEATURES += instead of IMAGE_FEATURES_append

I've changed both of these and it still fails if I enable the read-only-rootfs.

If I leave that option out, I can build an .hddimg which I dd'd to my USB stick. It tried to boot, finds /vmlinuz but fails to find /initrd

My local.conf settings are now:
# Live CD setup
IMAGE_FSTYPES += " live"
#IMAGE_FEATURES += " read-only-rootfs" CORE_IMAGE_EXTRA_INSTALL += " python-core python-modules"

Quoted 5 lines

Finally, during one of my builds, I ended up with a core-image-minimal*.iso I tried burning this to a CD an it booted up, albeit with a couple of complaints about a read-only rootfs. Sadly, I no longer get any .iso results when I 'bitbake core-image-minimal'

Quoted 6 lines

BTW, I tried this with daisy and the CD version (read-only) worked just fine for me - the ISO and .hddimg files built with no errors.

I'm bisecting now to see what broke...

Truly odd. After doing around a dozen bisected builds (some of which were pretty messed up), all in the same tree as the original, I could not reproduce the problem. So, I tried 100% from scratch, with the proper settings as above, including the read-only-rootfs, and it builds & works perfectly(*), both on CD and USB.

Not that I want to find the answer to this, but somehow when I tried the builds with my errant settings (from early on above), my build got so messed up that the errors persisted, even when I fixed the configuration settings. I thought that it should be more robust than this. Is this something I should pursue, or just treat it as "Doctor, Doctor, it hurts when I ..." and be happy that it works if you start afresh (which sadly takes at least 90 minutes on my pretty-fast build server)?

(*) Not a lot was tested and I only used core-image-minimal which served my needs (to build a stand-alone CD/USB setup to hand a QA tech). I did see some complaints about the read-only file system (e.g. can't save the timestamp on reboot), but overall worked OK and good enough for this task.

Thanks for the time and sorry for the noise. Looking forward to some documentation on this showing up in the future :-)

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#10 lore raw
In reply to Gary Thomas

Hi Gary,

Quoted 105 lines · On Thursday 05 June 2014 13:10:00 Gary Thomas wrote:
Quoted 81 lines · Paul Eggleton
Quoted 70 lines · On Thursday 05 June 2014 11:16:55 Gary Thomas wrote:
Quoted 24 lines · Paul Eggleton
Quoted 16 lines · On Thursday 05 June 2014 08:41:57 Gary Thomas wrote:
Quoted 15 lines · Paul Eggleton
Quoted 13 lines · On Thursday 05 June 2014 15:26:28 Paul Eggleton wrote:
Quoted 5 lines · On Thursday 05 June 2014 07:07:34 Gary Thomas wrote:

Looking through the Poky/Yocto sources, there seems to be some support for Live CD/USB images. However, I can't find any examples nor documentation for how to use this.

Can anyone provide some pointers?

You're right, we seem to be missing that in our documentation; I'm not sure where the best place to document it would be though.

FYI, you should just need to ensure "live" is in IMAGE_FSTYPES; then you should get a .directdisk image that you can just dd to a USB stick.

Quoted 6 lines
Quoted 1 line

Of course I meant to say .hddimg, not .directdisk.

Thanks, I'll give that a try.

What if I needed to boot from an actual CD? I have an old box here I'd like to try, but it doesn't boot from USB.

Quoted 6 lines

We can produce ISO images but I don't think that they work quite as well, e.g.:

https://bugzilla.yoctoproject.org/show_bug.cgi?id=5282

You could always try it though.

Bummer, when I tried to build core-image-minimal and/or core-image-x11, it failed:

| DEBUG: Executing shell function read_only_rootfs_hook
| sed: can't read
| /home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-ima
| ge
| -minimal-initramfs/1.0-r0/rootfs/etc/fstab: No such file or directory
| WARNING:
| /home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-ima
| ge
| -minimal-initramfs/1.0-r0/temp/run.read_only_rootfs_hook.30446:1 exit 2
| from|
| 
|   sed -i -e
|   '/^[#[:space:]]*\/dev\/root/{s/defaults/ro/;s/\([[:space:]]*[[:digit:
|   ]]
|   \)\([[:space:]]*\)[[:digit:]]$/\1\20/}'

/home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image -mi nimal-initramfs/1.0-r0/rootfs/etc/fstab

| DEBUG: Python function do_rootfs finished
| ERROR: Function failed: read_only_rootfs_hook (log file is located at

/home/local/x86_live_2014-06-05/tmp/work/genericx86-poky-linux/core-image -mi nimal-initramfs/1.0-r0/temp/log.do_rootfs.30446)

Using these settings:
Build Configuration:

BB_VERSION        = "1.23.1"
BUILD_SYS         = "i686-linux"
NATIVELSBSTRING   = "Fedora-13"
TARGET_SYS        = "i586-poky-linux"
MACHINE           = "genericx86"
DISTRO            = "poky"
DISTRO_VERSION    = "1.6+snapshot-20140605"
TUNE_FEATURES     = "m32 core2"
TARGET_FPU        = ""
Quoted 7 lines

meta
meta-yocto
meta-yocto-bsp = "master:e7114046be6e71fb326477dc882adb814ef6a751"

Extra settings in conf/local.conf
# Live CD setup
IMAGE_FSTYPES_append = " hddimg live"

"hddimg" isn't a valid IMAGE_FSTYPES item.

Quoted 3 lines

Also, try IMAGE_FSTYPES += rather than _append, that allows the initramfs image to have its own value (because it's not really valid to make a live initramfs...)

Sorry, I misread/misapplied your previous suggestions.

Quoted 3 lines
Quoted 1 line

IMAGE_FEATURES_append = " read-only-rootfs"

Try EXTRA_IMAGE_FEATURES += instead of IMAGE_FEATURES_append

I've changed both of these and it still fails if I enable the read-only-rootfs.

If I leave that option out, I can build an .hddimg which I dd'd to my USB stick. It tried to boot, finds /vmlinuz but fails to find /initrd

My local.conf settings are now:
# Live CD setup
IMAGE_FSTYPES += " live"
#IMAGE_FEATURES += " read-only-rootfs" CORE_IMAGE_EXTRA_INSTALL += " python-core python-modules"

Quoted 4 lines

Finally, during one of my builds, I ended up with a core-image-minimal*.iso I tried burning this to a CD an it booted up, albeit with a couple of complaints about a read-only rootfs. Sadly, I no longer get any .iso results when I 'bitbake core-image-minimal'

As far as I know you should get a .iso with live in IMAGE_FSTYPES, unless you set NOISO = "1". If you're not getting that or seeing other unexpected behaviour I think the best course of action would be to file a bug, and we'll try to track down the cause of the issue.

Cheers,
Paul

Signature · 2 lines
Paul Eggleton
Intel Open Source Technology Centre