Patch for bccmd

static inline int transport_open(int transport, char *device, speed_t bcsp_rate, uint16_t vendorid, uint16_t productid)

		return csr_open_usb(device, vendorid, productid);

		"\t-p <productid>     Select the productid for usb devices (default 0x0001)\n"
		"\t-v <vendorid>      Select the vendorid for usb devices (default 0x0a12)\n"

	{ "productid", 1, 0, 'p'},
	{ "vendorid", 1, 0, 'v'},

	uint16_t vendorid = 0x0a12; // default vendorid
	uint16_t productid = 0x0001; // default productid

	while ((opt=getopt_long(argc, argv, "+t:d:i:b:p:v:h", main_options, NULL)) != EOF) {

		case 'p':
			if (!strncasecmp(optarg, "0x", 2)){
			 productid = strtol(optarg, NULL, 16);
			}
			else{
			 printf("Please provide the productid in hex representation, eg. 0x0001\n");
			 exit(1);
			}
			break;
		case 'v':

			if (!strncasecmp(optarg, "0x", 2)){
			 vendorid = strtol(optarg, NULL, 16);
			}
			else{
			 printf("Please provide the productid in hex representation, eg. 0x0a12\n");
			 exit(1);
			}
			break;

	argv += optind; optind = 0; 

if (transport_open(transport, device, bcsp_rate, vendorid, productid) < 0)

int csr_open_usb(char *device, uint16_t vendorid, uint16_t productid);

int csr_open_usb(char *device, uint16_t vendorid, uint16_t productid)

			if (dev->descriptor.idVendor != vendorid ||
					dev->descriptor.idProduct != productid)

i recently had the issue that i was required to interact with a bluecore based device with a non-default vendorid and productid via usb. Plesae find a small patch to introduce two new parameters. If the parameters are omitted, the default value of 0x0a12 0x0001 will be used.