Has the failed drive been removed from the vg?

Hi,

I have a 1.5TB drive (/dev/sda) that failed but may have started failing over the the previous week (there was a point where the system did a fsck on the vg which I thought was related to the system rebooting after a power failure). I didn't notice anything untoward until today when I gather the drive finally failed.

The thing is that when I run the various commands, there is nothing to suggest that this drive is part of the vg yet I know it was

# vgdisplay
  /dev/sda: read failed after 0 of 1024 at 0: Input/output error
  /dev/sda: read failed after 0 of 1024 at 4141940736: Input/output error
  /dev/sda: read failed after 0 of 1024 at 4142043136: Input/output error
  /dev/sda: read failed after 0 of 1024 at 4096: Input/output error
  /dev/sda: read failed after 0 of 2048 at 0: Input/output error
  --- Volume group ---
  VG Name               mythtv
  System ID
  Format                lvm2
  Metadata Areas        3
  Metadata Sequence No  2
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                1
  Open LV               1
  Max PV                0
  Cur PV                3
  Act PV                3
  VG Size               6.77 TiB
  PE Size               4.00 MiB
  Total PE              1775136
  Alloc PE / Size       1775136 / 6.77 TiB
  Free  PE / Size       0 / 0
  VG UUID               634Wwa-MmIs-MWXO-zm7v-7Hhf-bX27-kO3WMg

# pvdisplay -v
    Scanning for physical volume names
  /dev/sda: read failed after 0 of 1024 at 0: Input/output error
  /dev/sda: read failed after 0 of 1024 at 4141940736: Input/output error
  /dev/sda: read failed after 0 of 1024 at 4142043136: Input/output error
    /dev/sda: read failed after 0 of 1024 at 0: Input/output error
  /dev/sda: read failed after 0 of 1024 at 4096: Input/output error
  /dev/sda: read failed after 0 of 2048 at 0: Input/output error
  --- Physical volume ---
  PV Name               /dev/sdb4
  VG Name               mythtv
  PV Size               2.68 TiB / not usable 4.00 MiB
  Allocatable           yes (but full)
  PE Size               4.00 MiB
  Total PE              702042
  Free PE               0
  Allocated PE          702042
  PV UUID               Mv8MD7-Lfmn-A5Gh-dGrD-jnlA-9XI0-cPcTdg

--- Physical volume ---

  PV Name               /dev/sdc1
  VG Name               mythtv
  PV Size               1.36 TiB / not usable 4.88 MiB
  Allocatable           yes (but full)
  PE Size               4.00 MiB
  Total PE              357698
  Free PE               0
  Allocated PE          357698
  PV UUID               Yw0lux-Wndt-50np-8HNy-ZE0T-apn0-KbvT8P

--- Physical volume ---

  PV Name               /dev/sdd1
  VG Name               mythtv
  PV Size               2.73 TiB / not usable 3.00 MiB
  Allocatable           yes (but full)
  PE Size               4.00 MiB
  Total PE              715396
  Free PE               0
  Allocated PE          715396
  PV UUID               1BF9Mi-p2F3-oicD-A9C9-G2X0-LGcW-Eizc7e

From the above I should be able to physically remove the drive and add a new one (to the VG) using the standard procedures?

Thanks in advance,
Jongi