: Please pull u-boot-imx
Hi Albert,
please pull from u-boot-imx, thanks !
The following changes since commit 49692c5f517d8e44ed9db0de778728fe7d2a300c:
net/designware: Make DMA burst length configurable and reduce by
default (2014-05-25 17:23:58 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to f2f07e8553185022b16adb91581700c86dc3a09a:
imx: correct HAB status for new chip TO (2014-06-17 17:45:09 +0200)
----------------------------------------------------------------
Eric Nelson (1):
serial_mxc: disable new features of autobaud detection
Fabio Estevam (9):
mx6sabreauto: Add the mx6dual-lite variant
mx6sabred: Add PFUZE100 PMIC support
mx25pdk: Add generic board support
mx6: Fix definition of IOMUXC_GPR12_DEVICE_TYPE_RC
embestmx6boards: Fix CONFIG_CONSOLE_DEV
embestmx6boards: Fix the dtb file name for riotboard
mx28evk: Fix warning when CONFIG_ENV_IS_IN_SPI_FLASH is selected
mx28evk: Add a target for SPI NOR boot
mx28evk: Add documentation on how to boot from SPI NOR
Marek Vasut (1):
arm: mx5: Enable CONFIG_SYS_GENERIC_BOARD on M53EVK
Masahiro Yamada (1):
spl: consolidate arch/arm/include/asm/arch-*/spl.h
Shawn Guo (1):
mx6: drop ARM errata 742230
Stefano Babic (2):
MX25: fix build due to missing sys_proto.h
imx: correct HAB status for new chip TO
Tim Harvey (12):
spl: nand: add support for mxs nand
mx6: add common SPL configuration
mx6: add boot device support for SPL
imx: add comments and remove unused struct fields
mx6: add structs for mmdc and ddr iomux registers
mx6: add mmdc configuration for MX6Q/MX6DL
imx: iomux: add macros to setup iomux for multiple SoC types
imx: ventana: split read_eeprom into standalone file
imx: ventana: auto-configure for IMX6Q vs IMX6DL
imx: ventana: switch to SPL
dwc_ahsata: return failure for MX6 if not IMX6Q/IMX6D
imx: sata: return failure if not IMX6Q/IMX6D
arch/arm/cpu/arm720t/tegra-common/spl.c | 2 +- arch/arm/cpu/armv7/mx6/Makefile | 1 + arch/arm/cpu/armv7/mx6/ddr.c | 490 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/cpu/armv7/mx6/hab.c | 73 +++++++++- arch/arm/imx-common/Makefile | 1 + arch/arm/imx-common/cpu.c | 16 +-- arch/arm/imx-common/iomux-v3.c | 18 ++- arch/arm/imx-common/sata.c | 7 +- arch/arm/imx-common/spl.c | 81 +++++++++++ arch/arm/include/asm/arch-at91/spl.h | 24 ---- arch/arm/include/asm/arch-davinci/spl.h | 16 --- arch/arm/include/asm/arch-mx35/spl.h | 22 --- arch/arm/include/asm/arch-mx5/spl.h | 13 -- arch/arm/include/asm/arch-mx6/hab.h | 17 ++- arch/arm/include/asm/arch-mx6/imx-regs.h | 2 + arch/arm/include/asm/arch-mx6/iomux.h | 2 +- arch/arm/include/asm/arch-mx6/mx6-ddr.h | 231 ++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-mx6/sys_proto.h | 4 +- arch/arm/include/asm/arch-tegra114/spl.h | 22 --- arch/arm/include/asm/arch-tegra124/spl.h | 13 -- arch/arm/include/asm/arch-tegra20/spl.h | 12 -- arch/arm/include/asm/arch-tegra30/spl.h | 12 -- arch/arm/include/asm/imx-common/iomux-v3.h | 25 ++++ arch/arm/include/asm/spl.h | 20 +++ board/denx/m53evk/m53evk.c | 2 +- board/freescale/mx28evk/README | 22 ++- board/freescale/mx6qsabreauto/mx6dl.cfg | 130 +++++++++++++++++ board/freescale/mx6sabresd/mx6sabresd.c | 84 +++++++++++ board/gateworks/gw_ventana/Makefile | 3 +- board/gateworks/gw_ventana/README | 92 +++++++----- board/gateworks/gw_ventana/eeprom.c | 89 ++++++++++++ board/gateworks/gw_ventana/gw_ventana.c | 597 +++++++++++++++++++++++++++++++++++++++++----------------------------------- board/gateworks/gw_ventana/gw_ventana.cfg | 15 -- board/gateworks/gw_ventana/gw_ventana_spl.c | 419 +++++++++++++++++++++++++++++++++++++++++++++++++++++ board/gateworks/gw_ventana/ventana_eeprom.h | 11 ++ boards.cfg | 8 +- doc/README.mxs | 26 ++++ drivers/block/dwc_ahsata.c | 5 + drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/mxs_nand_spl.c | 231 ++++++++++++++++++++++++++++++ drivers/serial/serial_mxc.c | 4 +- include/configs/embestmx6boards.h | 4 +- include/configs/gw_ventana.h | 11 ++ include/configs/imx6_spl.h | 71 +++++++++ include/configs/m53evk.h | 1 + include/configs/mx25pdk.h | 2 + include/configs/mx28evk.h | 5 +- include/configs/mx6_common.h | 1 - include/configs/mx6qsabreauto.h | 4 + include/configs/mx6sabresd.h | 12 ++ include/power/pfuze100_pmic.h | 4 + 51 files changed, 2475 insertions(+), 503 deletions(-) create mode 100644 arch/arm/cpu/armv7/mx6/ddr.c create mode 100644 arch/arm/imx-common/spl.c delete mode 100644 arch/arm/include/asm/arch-at91/spl.h delete mode 100644 arch/arm/include/asm/arch-davinci/spl.h delete mode 100644 arch/arm/include/asm/arch-mx35/spl.h delete mode 100644 arch/arm/include/asm/arch-mx5/spl.h delete mode 100644 arch/arm/include/asm/arch-tegra114/spl.h delete mode 100644 arch/arm/include/asm/arch-tegra124/spl.h delete mode 100644 arch/arm/include/asm/arch-tegra20/spl.h delete mode 100644 arch/arm/include/asm/arch-tegra30/spl.h create mode 100644 board/freescale/mx6qsabreauto/mx6dl.cfg create mode 100644 board/gateworks/gw_ventana/eeprom.c create mode 100644 board/gateworks/gw_ventana/gw_ventana_spl.c create mode 100644 drivers/mtd/nand/mxs_nand_spl.c create mode 100644 include/configs/imx6_spl.h
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
Hi Stefano,
Quoted 123 lines · Stefano Babic
Hi Albert,
please pull from u-boot-imx, thanks !
The following changes since commit
49692c5f517d8e44ed9db0de778728fe7d2a300c:net/designware: Make DMA burst length configurable and reduce by
default (2014-05-25 17:23:58 +0200)are available in the git repository at:
git://www.denx.de/git/u-boot-imx.gitmasterfor you to fetch changes up to
f2f07e8553185022b16adb91581700c86dc3a09a:imx: correct HAB status for new chip TO (2014-06-17 17:45:09 +0200)
----------------------------------------------------------------
Eric Nelson (1):
serial_mxc: disable new features of autobaud detectionFabio Estevam (9):
mx6sabreauto: Add the mx6dual-lite variant
mx6sabred: Add PFUZE100 PMIC support
mx25pdk: Add generic board support
mx6: Fix definition ofIOMUXC_GPR12_DEVICE_TYPE_RC
embestmx6boards: FixCONFIG_CONSOLE_DEV
embestmx6boards: Fix the dtb file name for riotboard
mx28evk: Fix warning whenCONFIG_ENV_IS_IN_SPI_FLASHis selected
mx28evk: Add a target for SPI NOR boot
mx28evk: Add documentation on how to boot from SPI NORMarek Vasut (1):
arm: mx5: EnableCONFIG_SYS_GENERIC_BOARDon M53EVKMasahiro Yamada (1):
spl: consolidatearch/arm/include/asm/arch-*/spl.hShawn Guo (1):
mx6: drop ARM errata 742230Stefano Babic (2):
MX25: fix build due to missingsys_proto.h
imx: correct HAB status for new chip TOTim Harvey (12):
spl: nand: add support for mxs nand
mx6: add common SPL configuration
mx6: add boot device support for SPL
imx: add comments and remove unused struct fields
mx6: add structs for mmdc and ddr iomux registers
mx6: add mmdc configuration for MX6Q/MX6DL
imx: iomux: add macros to setup iomux for multiple SoC types
imx: ventana: splitread_eeprominto standalone file
imx: ventana: auto-configure for IMX6Q vs IMX6DL
imx: ventana: switch to SPL
dwc_ahsata: return failure for MX6 if not IMX6Q/IMX6D
imx: sata: return failure if not IMX6Q/IMX6Darch/arm/cpu/arm720t/tegra-common/spl.c | 2 +- arch/arm/cpu/armv7/mx6/Makefile | 1 + arch/arm/cpu/armv7/mx6/ddr.c | 490 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/cpu/armv7/mx6/hab.c | 73 +++++++++- arch/arm/imx-common/Makefile | 1 + arch/arm/imx-common/cpu.c | 16 +-- arch/arm/imx-common/iomux-v3.c | 18 ++- arch/arm/imx-common/sata.c | 7 +- arch/arm/imx-common/spl.c | 81 +++++++++++ arch/arm/include/asm/arch-at91/spl.h | 24 ---- arch/arm/include/asm/arch-davinci/spl.h | 16 --- arch/arm/include/asm/arch-mx35/spl.h | 22 --- arch/arm/include/asm/arch-mx5/spl.h | 13 -- arch/arm/include/asm/arch-mx6/hab.h | 17 ++- arch/arm/include/asm/arch-mx6/imx-regs.h | 2 + arch/arm/include/asm/arch-mx6/iomux.h | 2 +- arch/arm/include/asm/arch-mx6/mx6-ddr.h | 231 ++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-mx6/sys_proto.h | 4 +- arch/arm/include/asm/arch-tegra114/spl.h | 22 --- arch/arm/include/asm/arch-tegra124/spl.h | 13 -- arch/arm/include/asm/arch-tegra20/spl.h | 12 -- arch/arm/include/asm/arch-tegra30/spl.h | 12 -- arch/arm/include/asm/imx-common/iomux-v3.h | 25 ++++ arch/arm/include/asm/spl.h | 20 +++ board/denx/m53evk/m53evk.c | 2 +- board/freescale/mx28evk/README | 22 ++- board/freescale/mx6qsabreauto/mx6dl.cfg | 130 +++++++++++++++++ board/freescale/mx6sabresd/mx6sabresd.c | 84 +++++++++++ board/gateworks/gw_ventana/Makefile | 3 +- board/gateworks/gw_ventana/README | 92 +++++++----- board/gateworks/gw_ventana/eeprom.c | 89 ++++++++++++ board/gateworks/gw_ventana/gw_ventana.c | 597 +++++++++++++++++++++++++++++++++++++++++----------------------------------- board/gateworks/gw_ventana/gw_ventana.cfg | 15 -- board/gateworks/gw_ventana/gw_ventana_spl.c | 419 +++++++++++++++++++++++++++++++++++++++++++++++++++++ board/gateworks/gw_ventana/ventana_eeprom.h | 11 ++ boards.cfg | 8 +- doc/README.mxs | 26 ++++ drivers/block/dwc_ahsata.c | 5 + drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/mxs_nand_spl.c | 231 ++++++++++++++++++++++++++++++ drivers/serial/serial_mxc.c | 4 +- include/configs/embestmx6boards.h | 4 +- include/configs/gw_ventana.h | 11 ++ include/configs/imx6_spl.h | 71 +++++++++ include/configs/m53evk.h | 1 + include/configs/mx25pdk.h | 2 + include/configs/mx28evk.h | 5 +- include/configs/mx6_common.h | 1 - include/configs/mx6qsabreauto.h | 4 + include/configs/mx6sabresd.h | 12 ++ include/power/pfuze100_pmic.h | 4 + 51 files changed, 2475 insertions(+), 503 deletions(-) create mode 100644 arch/arm/cpu/armv7/mx6/ddr.c create mode 100644 arch/arm/imx-common/spl.c delete mode 100644 arch/arm/include/asm/arch-at91/spl.h delete mode 100644 arch/arm/include/asm/arch-davinci/spl.h delete mode 100644 arch/arm/include/asm/arch-mx35/spl.h delete mode 100644 arch/arm/include/asm/arch-mx5/spl.h delete mode 100644 arch/arm/include/asm/arch-tegra114/spl.h
Quoted 8 lines
delete mode 100644 arch/arm/include/asm/arch-tegra124/spl.h delete mode 100644 arch/arm/include/asm/arch-tegra20/spl.h delete mode 100644 arch/arm/include/asm/arch-tegra30/spl.h create mode 100644 board/freescale/mx6qsabreauto/mx6dl.cfg create mode 100644 board/gateworks/gw_ventana/eeprom.c create mode 100644 board/gateworks/gw_ventana/gw_ventana_spl.c create mode 100644 drivers/mtd/nand/mxs_nand_spl.c create mode 100644 include/configs/imx6_spl.h
This breaks build on vf610twr.
Git bisect shows the issue to be in commit 5bf497e3 (cc:ing author)
The error seems to be trivial:
arch/arm/imx-common/iomux-v3.c:14:32: fatal error:asm/arch/sys_proto.h: No such file or directory
Amicalement,
Signature · 1 line
Albert.
Hi Albert,
Quoted 10 lines · Albert ARIBAUD
This breaks build on vf610twr.
Git bisect shows the issue to be in commit
5bf497e3(cc:ing author)The error seems to be trivial:
arch/arm/imx-common/iomux-v3.c:14:32: fatal error:asm/arch/sys_proto.h: No such file or directory
I check it, there was the same issue for mx25, I'll fix it.
Best regards,
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
Hi Stefano,
Quoted 9 lines · Stefano Babic
Hi Albert,
Quoted 5 lines · Albert ARIBAUD
This breaks build on vf610twr.
Git bisect shows the issue to be in commit
5bf497e3(cc:ing author)
Quoted 7 lines
Quoted 5 lines
The error seems to be trivial:
arch/arm/imx-common/iomux-v3.c:14:32: fatal error:asm/arch/sys_proto.h: No such file or directoryI check it, there was the same issue for mx25, I'll fix it.
Thanks, I saw you have sent out a patch. I suggest you take it into the imx tree (possibly applying it where it ensures as few non-building commits as possible) then re-send a PR.
Quoted 2 lines
Best regards,
Stefano
Amicalement,
Signature · 1 line
Albert.
Hi Albert,
Quoted 3 lines · Albert ARIBAUD
Thanks, I saw you have sent out a patch. I suggest you take it into the imx tree (possibly applying it where it ensures as few non-building commits as possible) then re-send a PR.
Agree, I am doing it.
Regards,
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================