Skip to contentSkip to conversation

mlmmj and DKIM

mlmmj Uffe Jakobsen 3 participants 6 messages Jun 24, 2014 – Jun 25, 2014

lore
Share & tools
lore
#0 lore raw

Hi,

I'm returning to list management after some years (10) of absence.

I'm trying to solve a problem with some users originating and posting to my lists from DKIM "restrained" sites.

Their posts to the lists gets rejected by receiving parts (sites) that check for DKIM validity - hotmail.com being one site that seem to reject the most.

One approach would be to setup proper SRS - I guess - but the number of lists and users that I have are quite low - and hence i was looking for an "easier" solution...

Any suggestions - How do you approach such problems ?

Thanks in advance

Kind regards Uffe :-)

#1 lore raw
Quoted 9 lines · Yuri D'Elia
Quoted 8 lines · Uffe Jakobsen

Their posts to the lists gets rejected by receiving parts (sites) that check for DKIM validity - hotmail.com being one site that seem to reject the most.

One approach would be to setup proper SRS - I guess - but the number of lists and users that I have are quite low - and hence i was looking for an "easier" solution...

Quoted 9 lines
Quoted 1 line

Any suggestions - How do you approach such problems ?

Yes, either just forward the message (do not change the content/reply-to or anything else) or strip DKIM-Signature from incoming messages (using delheaders).

The latter will not work if DMARC is being used, but I didn't have problems so far. YMMV.

Well, I've tried both your suggestions

The sending domain in question is @post11.tele.dk - and in that combination the most problems is seen with recipients @hotmail.com

1) Plain forwarded messages from DKIM domains are rejected by hotmail. I guess that they look at MAIL FROM and RCPT TO as well....

2) Stripping DKIM headers does not seem til help either - hotmail.com still rejects.

/Uffe

#2 lore raw
In reply to Uffe Jakobsen
Quoted 21 lines · On Tuesday, June 24, 2014 12:08:41 Uffe Jakobsen wrote:
Quoted 9 lines · Yuri D'Elia
Quoted 8 lines · Uffe Jakobsen

Their posts to the lists gets rejected by receiving parts (sites) that check for DKIM validity - hotmail.com being one site that seem to reject the most.

One approach would be to setup proper SRS - I guess - but the number of lists and users that I have are quite low - and hence i was looking for an "easier" solution...

Quoted 8 lines
Quoted 1 line

Any suggestions - How do you approach such problems ?

Yes, either just forward the message (do not change the content/reply-to or anything else) or strip DKIM-Signature from incoming messages (using delheaders).

The latter will not work if DMARC is being used, but I didn't have problems so far. YMMV.

Well, I've tried both your suggestions

Quoted 8 lines

The sending domain in question is @post11.tele.dk - and in that combination the most problems is seen with recipients @hotmail.com

1) Plain forwarded messages from DKIM domains are rejected by hotmail. I guess that they look at MAIL FROM and RCPT TO as well....

2) Stripping DKIM headers does not seem til help either - hotmail.com still rejects.

It looks like tele.dk is another domain that is now using DMARC with "p=reject" like AOL and Yahoo:( are. Here's the test as to why I think that's what's going on:

   $ dig _dmarc.tele.dk txt +short
   "v=DMARC1\; p=reject\; sp=none\; pct0\;"

-- Chris

--

Chris Knadle
[email protected]

#3 lore raw
In reply to Uffe Jakobsen
Quoted 32 lines · Chris Knadle
Quoted 21 lines · On Tuesday, June 24, 2014 12:08:41 Uffe Jakobsen wrote:
Quoted 9 lines · Yuri D'Elia
Quoted 8 lines · Uffe Jakobsen

Their posts to the lists gets rejected by receiving parts (sites) that check for DKIM validity - hotmail.com being one site that seem to reject the most.

One approach would be to setup proper SRS - I guess - but the number of lists and users that I have are quite low - and hence i was looking for an "easier" solution...

Quoted 8 lines
Quoted 1 line

Any suggestions - How do you approach such problems ?

Yes, either just forward the message (do not change the content/reply-to or anything else) or strip DKIM-Signature from incoming messages (using delheaders).

The latter will not work if DMARC is being used, but I didn't have problems so far. YMMV.

Well, I've tried both your suggestions

Quoted 8 lines

The sending domain in question is @post11.tele.dk - and in that combination the most problems is seen with recipients @hotmail.com

1) Plain forwarded messages from DKIM domains are rejected by hotmail. I guess that they look at MAIL FROM and RCPT TO as well....

2) Stripping DKIM headers does not seem til help either - hotmail.com still rejects.

Quoted 7 lines

It looks like tele.dk is another domain that is now using DMARC with "p=reject" like AOL and Yahoo:( are. Here's the test as to why I think that's what's going on:

    $ dig _dmarc.tele.dk txt +short
    "v=DMARC1\; p=reject\; sp=none\; pct0\;"

Ok, I need to read up on DMARC...

Would such DMARC record as stated above have an effect on a subdomain as @post11.tele.dk ?

/Uffe

#4 lore raw
In reply to Uffe Jakobsen
Quoted 40 lines · On Tuesday, June 24, 2014 15:41:11 Uffe Jakobsen wrote:
Quoted 32 lines · Chris Knadle
Quoted 22 lines · On Tuesday, June 24, 2014 12:08:41 Uffe Jakobsen wrote:
Quoted 10 lines · Yuri D'Elia
Quoted 9 lines · Uffe Jakobsen

Their posts to the lists gets rejected by receiving parts (sites) that check for DKIM validity - hotmail.com being one site that seem to reject
the most.

One approach would be to setup proper SRS - I guess - but the number of lists and users that I have are quite low - and hence i was looking for an "easier" solution...

Quoted 8 lines
Quoted 1 line

Any suggestions - How do you approach such problems ?

Yes, either just forward the message (do not change the content/reply-to or anything else) or strip DKIM-Signature from incoming messages (using delheaders).

The latter will not work if DMARC is being used, but I didn't have problems so far. YMMV.

Well, I've tried both your suggestions

Quoted 8 lines

The sending domain in question is @post11.tele.dk - and in that combination the most problems is seen with recipients @hotmail.com

1) Plain forwarded messages from DKIM domains are rejected by hotmail. I guess that they look at MAIL FROM and RCPT TO as well....

2) Stripping DKIM headers does not seem til help either - hotmail.com still rejects.

Quoted 6 lines

It looks like tele.dk is another domain that is now using DMARC with "p=reject" like AOL and Yahoo:( are. Here's the test as to why I think that's>
what's going on:

    $ dig _dmarc.tele.dk txt +short
    "v=DMARC1\; p=reject\; sp=none\; pct0\;"
Quoted 4 lines

Ok, I need to read up on DMARC...

Would such DMARC record as stated above have an effect on a subdomain as @post11.tele.dk ?

It isn't clear. This is what I'm able to find on the subject so far:

http://dmarc.org/faq.html#s_21

-- Chris

--

Chris Knadle
[email protected]

#5 lore raw
In reply to Uffe Jakobsen

Uffe Jakobsen:

Quoted 2 lines

I'm trying to solve a problem with some users originating and posting to my lists from DKIM "restrained" sites.

...

Quoted 1 line

Any suggestions - How do you approach such problems ?

Hello,

we had a similar question a month ago (unfortunately not visible in the archive)
I suggest to simply not modify any message content. Not only on listservers - any MTA
should be configured to avoid unnecessary content modification.

In case of mlmmj thats easy.

$ rm ${LIST_HOME}/control/prefix
$ rm ${LIST_HOME}/control/footer
$ rm ${LIST_HOME}/control/delheaders

also I suggest to add a set of standard headers. These are normally not covered by DKIM signatures
and should not invalidate them.

$ cat ${LIST_HOME}/control/customheaders
List-Id: <testing.lists.example.org>
List-Post: <mailto:[email protected]>
List-Help: <mailto:[email protected]>
List-Subscribe: <mailto:[email protected]>
List-Unsubscribe: <mailto:[email protected]>
List-Owner: <mailto:[email protected]>
Precedence: list

Andreas