Skip to contentSkip to conversation

SysRQ via ICMP does not work in 3.14

DISCUSSION Pavel Vasilyev 2 participants 2 messages Jul 10, 2014

lore
Share & tools
lore
#0 lore raw

- Remote side:

# sysctl -w net.ipv4.icmp_echo_sysrq=305419896

- Local side:

$ ping -c1 -s57 -p1122338862 172.16.0.26
PATTERN: 0x1122338862
PING 172.16.0.26 (172.16.0.26) 57(85) bytes of data.
65 bytes from 172.16.0.26: icmp_req=1 ttl=64 time=0.508 ms

--- 172.16.0.26 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.508/0.508/0.508/0.000 ms

- Remote side: Hello, i'm live!

Signature · 1 line
                                                         Pavel.
#1 lore raw
Quoted 8 lines · Pavel Vasilyev

- Remote side:

# sysctl -w net.ipv4.icmp_echo_sysrq=305419896

- Local side:

$ ping -c1 -s57 -p1122338862 172.16.0.26
PATTERN: 0x1122338862

This pattern does not match net.ipv4.icmp_echo_sysrq.

Quoted 16 lines

PING 172.16.0.26 (172.16.0.26) 57(85) bytes of data. 65 bytes from 172.16.0.26: icmp_req=1 ttl=64 time=0.508 ms

--- 172.16.0.26 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.508/0.508/0.508/0.000 ms

- Remote side: Hello, i'm live!
--

Pavel.
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Signature · 2 lines
Thanks,
//richard