Skip to contentSkip to conversation

i2c-i801 vs. ACPI driver to access SMBUS

DISCUSSION Christian Schmidt 1 participant 1 message Aug 6, 2014

lore
Share & tools
lore
#0 lore raw

Hi all,

I have a small issue with the i2c-i801 driver. It does not register the i2c adaptor due to an ACPI resource conflict:

[11074.459747] ACPI Warning: SystemIO range
0x000000000000f000-0x000000000000f01f conflicts with OpRegion
0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI)
(20140214/utaddress-258)
[11074.459761] ACPI: If an ACPI driver is available for this device, you

should use it instead of the native driver

With the code:

        err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
        if (err) {
                err = -ENODEV;
                goto exit;
        }

silently not activating the driver, however it still shows up in lspci -k. Commenting out the above code makes the driver provide the smbus interface as expected,

The question is: Is there any existing ACPI driver for this? I can't find any either under ACPI or i2c (i2c-scmi does not work for this).

Regards,
Christian

PS: Please CC: me on replies as I am not subscribed to the list.