Skip to contentSkip to conversation

Assembling images to build a NOR boot image

DISCUSSION Renaud Barbier 2 participants 3 messages Aug 7, 2014 – Aug 11, 2014

lore
Share & tools
lore
#0 lore raw

Hello,
I am working on the creation of a boot image for a NOR flash. The image assembles a boot loader and a ubi image containing the kernel and device tree.

So far I have created a build area to install the kernel and device tree and used IMAGE_CMD_ubi to create the ubi image.

Then I have added a python function do_norbuild that puts together the boot loader and ubi image and adds padding.
Using bitbake, I can create the NOR image as follows:
bitbake -c norbuild core-image

However,
"bitbake core-image" will not call the norbuild task.

I have been through quite a lot of code and documentation and cannot figure out why the task is not called.

If you have any idea of what couldbe wrong, please le me know.

Cheers,
Renaud

#1 lore raw
Quoted 13 lines · Renaud Barbier

Hello,
I am working on the creation of a boot image for a NOR flash. The image assembles a boot loader and a ubi image containing the kernel and device tree.

So far I have created a build area to install the kernel and device tree and used IMAGE_CMD_ubi to create the ubi image.

Then I have added a python function do_norbuild that puts together the boot loader and ubi image and adds padding.
Using bitbake, I can create the NOR image as follows:
bitbake -c norbuild core-image

Quoted 7 lines

However,
"bitbake core-image" will not call the norbuild task.

I have been through quite a lot of code and documentation and cannot figure out why the task is not called.

If you have any idea of what couldbe wrong, please le me know.

you seem to have created a task, not just a Python function, since you can run it with -c norbuild. By default when running bitbake <recipe>, bitbake will run do_build task. so when you create your own custom task, you need to insert it into the task list, maybe you haven't done that?

something like this should work in your case:

addtask norbuild before do_build after do_rootfs

alternatively, instead of creating your own task, you could use the existing do_rootfs hook:

http://www.yoctoproject.org/docs/latest/ref-manual/ref-manual.html#var-ROOTFS_POSTPROCESS_COMMAND

#2 lore raw
Quoted 27 lines · Nicolas Dechesne
Quoted 13 lines · Renaud Barbier
Quoted 13 lines

Hello,
I am working on the creation of a boot image for a NOR flash. The image assembles a boot loader and a ubi image containing the kernel and device tree.

So far I have created a build area to install the kernel and device tree and used IMAGE_CMD_ubi to create the ubi image.

Then I have added a python function do_norbuild that puts together the boot loader and ubi image and adds padding.
Using bitbake, I can create the NOR image as follows:
bitbake -c norbuild core-image

Quoted 7 lines
Quoted 7 lines

However,
"bitbake core-image" will not call the norbuild task.

I have been through quite a lot of code and documentation and cannot figure out why the task is not called.

If you have any idea of what couldbe wrong, please le me know.

you seem to have created a task, not just a Python function, since you can run it with -c norbuild. By default when running bitbake <recipe>, bitbake will run do_build task. so when you create your own custom task, you need to insert it into the task list, maybe you haven't done that?

Quoted 3 lines

something like this should work in your case:

addtask norbuild before do_build after do_rootfs

Thanks,
originally I had "addtask norbuild after do_rootfs" followed by other desperate attempts. It did not work.
I just saw your email as I was looking at do_build.
Adding before do_build did resolve my problem.

Cheers,
Renaud