Please pull u-boot-sunxi.git/master

Hi Albert,

Please pull from u-boot-sunxi.git/master for a set of patches adding generic boot command support + a series of DRAM cleanups and fixes.

Note the generic boot command support depends on "config: introduce a generic $bootcmd" which has been merged into u-boot/master, but not yet into u-boot-arm/master. So I've cherry picked that patch into u-boot-sunxi/master. It should "disappear" on merge.

The following changes since commit 1899fac925eda817e12234aef3d01d354788662e:

Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master' (2014-08-09 16:48:34 +0200)

are available in the git repository at:

http://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to bf4ca384ad991c09cad7dd7838c1da6756c101b9:

sunxi: dram: Autodetect DDR3 bus width and density (2014-08-12 08:42:34 +0200)

----------------------------------------------------------------
Dennis Gilmore (1):
config: introduce a generic $bootcmd

Hans de Goede (7):
sunxi-common.h: Remove CONFIG_SYS_BOOT_GET_CMDLINE sunxi-common.h: Remove dead #ifdef CONFIG_CMD_NET code block sunxi-common.h: Don't undefine CONFIG_CMD_NFS
sunxi-common.h: Don't undef CONFIG_CMD_NET only to redefine it again later
sunxi: Kconfig: move common settings into a shared code block sunxi-common.h: Use new generic $bootcmd
sunxi: Add environment settings to make extlinux.conf booting work

Siarhei Siamashka (16):
sunxi: dram: Remove useless 'dramc_scan_dll_para()' function
sunxi: dram: Remove broken super-standby remnants
sunxi: dram: Respect the DDR3 reset timing requirements
sunxi: dram: Fix CKE delay handling for sun4i/sun5i
sunxi: dram: Remove broken impedance and ODT configuration code
sunxi: dram: Do DDR3 reset in the same way on sun4i/sun5i/sun7i
sunxi: dram: Add 'await_bits_clear'/'await_bits_set' helper functions
sunxi: dram: Re-introduce the impedance calibration ond ODT
sunxi: dram: Configurable MBUS clock speed (use PLL5 or PLL6)
sunxi: dram: Use divisor P=1 for PLL5
sunxi: dram: Improve DQS gate data training error handling
sunxi: dram: Add a helper function 'mctl_get_number_of_lanes'
sunxi: dram: Configurable DQS gating window mode and delay
sunxi: dram: Drop DDR2 support and assume only single rank DDR3 memory
sunxi: dram: Derive write recovery delay from DRAM clock speed
sunxi: dram: Autodetect DDR3 bus width and density

 arch/arm/cpu/armv7/sunxi/dram.c        | 621 ++++++++++++++++++---------------
 arch/arm/include/asm/arch-sunxi/dram.h |  14 +-
 board/sunxi/Kconfig                    |  33 +-
 configs/A10-OLinuXino-Lime_defconfig   |   1 +
 configs/A10s-OLinuXino-M_defconfig     |   1 +
 configs/A13-OLinuXinoM_defconfig       |   1 +
 configs/A13-OLinuXino_defconfig        |   1 +
 configs/A20-OLinuXino_MICRO_defconfig  |   1 +
 configs/Auxtek-T004_defconfig          |   1 +
 configs/Bananapi_defconfig             |   1 +
 configs/Cubieboard2_FEL_defconfig      |   1 +
 configs/Cubieboard2_defconfig          |   1 +
 configs/Cubieboard_defconfig           |   1 +
 configs/Cubietruck_FEL_defconfig       |   1 +
 configs/Cubietruck_defconfig           |   1 +
 configs/Linksprite_pcDuino3_defconfig  |   1 +
 configs/Mele_A1000G_defconfig          |   1 +
 configs/Mele_A1000_defconfig           |   1 +
 configs/Mini-X-1Gb_defconfig           |   1 +
 configs/Mini-X_defconfig               |   1 +
 configs/ba10_tv_box_defconfig          |   1 +
 configs/i12-tvbox_defconfig            |   1 +
 configs/qt840a_defconfig               |   1 +
 configs/r7-tv-dongle_defconfig         |   1 +
 include/config_distro_bootcmd.h        | 197 +++++++++++
 include/configs/sunxi-common.h         |  56 ++-
 26 files changed, 614 insertions(+), 328 deletions(-)
 create mode 100644 include/config_distro_bootcmd.h

Regards,

Hans

Applied to u-boot/master, thanks!

Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140829/81c27259/attachment.pgp>