Broadcom 43241b4-sdio NVRAM help request

sorry to keep sending you logs, but this one is complete from deactivating to reactivating with the debug, want to make sure you have all the info you need

let me know if you need anything else

thanks for your help

On Thu, Aug 28, 2014 at 9:18 PM, Brain WrecK <[email protected] <mailto:[email protected]>> wrote:

Hello again

i realized i did not have the debug features enabled for the brcm devices so i compiled a new kernel, this is version 3.17.rc2 and here is the log output i could get from the modprobe brcmfmac 'debug=0xd416'

On Wed, Aug 27, 2014 at 4:00 AM, Arend van Spriel <[email protected] <mailto:[email protected]>> wrote:

+ linux-wireless

Please keep Cc: There may be more people with Asus T100 interested in this.

-------- Original Message --------
Subject: Re: Broadcom 43241b4-sdio NVRAM help request
Date: Tue, 26 Aug 2014 22:24:00 -0600
From: Brain WrecK <[email protected] <mailto:[email protected]>>
To: Arend van Spriel <[email protected] <mailto:[email protected]>>

Thank you so much for taking the time out of your vacation to respond, i
hope you have nice weather and sunny skies from now on, you certainly
brightened my day by offering your help

using stock ubuntu kernel

here is the info you requested, i am currently using ubuntu 14.10 with
Ubuntu-3.17rc2 with the NVRAM file from /sys/firmware/efi/efivars/

thank you once again for offering your help

please let me know if you need any more information

i can also provide the information from a 3.16 kernel, if you need it

thank you again

Brian Loften

On Tue, Aug 26, 2014 at 2:51 AM, Arend van Spriel <[email protected] <mailto:[email protected]> <mailto:[email protected] <mailto:[email protected]>>> wrote:

On 08/24/14 10:06, Brain WrecK wrote:

Hello Sir

I am writing this request to ask for your aid, we have been tryng to get
ubuntu 14.10 to run on an ASUS T100TA tablet and we are having wifi issues

I am appealing to you and to ask for your help as i have been trying for
weeks to get this wifi working stable, i have been trying to modify the
NVRAM file to get a stable connection so we can have decent working internet on this tablet to enjoy the Linux experience. right now currently we can download in the range of 600 bytes/sec to maybe 10kb/sec

We are unable to connect with the current NVRAM file provided from the
NVRAM file unless we put our current MAC address for our wifi card in
the brcmfmac43241b4-sdio.txt

and once we do that we are able to connect but we get frequent disconnects and very very slow download rates...

I have pulled the NVRAM from the efivars in sys/firmware/efivars and have attached it for you is there perhaps an updated file that will work, or would you be able to help us and create a new or provide a current NVRAM File?

Also the firmware that is provided for us is dated july 17th 2013 is there an updated linux firmware that we can use for this device that perhaps would have an updated NVRAM file to go with it?

I have attached the firmware that is provided for us as well for your
reference

I am sure you are a busy person and we in the linux community would love
to be rid of windows and enjoy the linux experience, could you, would
you lend us your aid?

Hi Brian,

Sure I can try to be somewhat helpful. I am currently on vacation and rain is pouring down in buckets.

The nvram that is in EFI should be the perfect fit for the device. Maybe you can provide some more background info. Are you using stock ubuntu kernel. What kernel version is running? Can you boot the kernel with 'debug ignore_loglevel' parameters, load the brcmfmac driver with 'debug=0xd416', and send me the full kernel log.

Regards,
Arend