echo 0 > /proc/sys/vm/swappiness triggers OOM killer under 2.6.14.
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 1 line · Rob Landley
Under 2.6.14 (UML), I have a workload that runs with 64 megs ram and 256 megs swap space. It completes (albeit swapping like mad) with swappiness at the default 60, but if I set it to 0 the OOM killer kicks in and the script aborts.
You should get some debugging output in dmesg when the OOM killer kicks in, can you post this?
Signature · 3 lines
Robert Hancock Saskatoon, SK, Canada To email, remove "nospam" from [email protected] Home Page: http://www.roberthancock.com/
Quoted 8 lines · Robert Hancock
Quoted 4 lines · Rob Landley
Under 2.6.14 (UML), I have a workload that runs with 64 megs ram and 256 megs swap space. It completes (albeit swapping like mad) with swappiness at the default 60, but if I set it to 0 the OOM killer kicks in and the script aborts.
You should get some debugging output in dmesg when the OOM killer kicks in, can you post this?
Sure:
VFS: Mounted root (hostfs filesystem).
Adding 262136k swap on tmp/ubda. Priority:-1 extents:1 across:262136k
oom-killer: gfp_mask=0x400d2, order=0
Mem-info:
DMA per-cpu:
cpu 0 hot: low 14, high 42, batch 7 used:20
cpu 0 cold: low 0, high 14, batch 7 used:8
Normal per-cpu: empty
HighMem per-cpu: empty
Free pages: 1416kB (0kB HighMem)
Active:14014 inactive:718 dirty:1 writeback:0 unstable:0 free:354 slab:468 mapped:14722 pagetables:58
DMA free:1416kB min:1024kB low:1280kB high:1536kB active:56056kB inactive:2872kB present:65536kB pages_scanned:26577 all_unreclaimable? no lowmem_reserve[]: 0 0 0
Normal free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0
HighMem free:0kB min:128kB low:160kB high:192kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0
DMA: 98*4kB 0*8kB 0*16kB 0*32kB 4*64kB 2*128kB 0*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 1416kB
Normal: empty
HighMem: empty
Swap cache: add 5689, delete 5485, find 583/725, race 0+0
Free swap = 255420kB
Total swap = 262136kB
Free swap: 255420kB
16384 pages of RAM
0 pages of HIGHMEM
671 reserved pages
1034 pages shared
204 pages swap cached
Out of Memory: Killed process 30055 (cc1).
Badness in handle_page_fault
at /home/landley/newbuild/firmware-build/tmpdir/linux-2.6.14/arch/um/kernel/trap_kern.c:98 08bafb10: [<0805d064>] handle_page_fault+0x1c4/0x260 08bafb50: [<0805d1a7>] segv+0xa7/0x2e0 08bafb70: [<0805e713>] setjmp_wrapper+0x83/0x90 08bafba8: [<0805e6c7>] setjmp_wrapper+0x37/0x90 08bafbd0: [<0805b1a5>] change_signals+0x65/0x90 08bafbe0: [<08060d3a>] do_ops+0x14a/0x150 08bafc10: [<0805f29f>] wait_stub_done+0x5f/0x110 08bafc40: [<0805d67c>] segv_handler+0x7c/0x90 08bafc60: [<08060fbe>] user_signal+0x3e/0x70 08bafc80: [<0805faa0>] userspace+0x180/0x220 08bafcf0: [<08060711>] fork_handler+0xc1/0xe0
System halted.
Quoted 1 line · Rob Landley
oom-killer: gfp_mask=0x400d2, order=0
something explicitly asked for a highmem page.
Quoted 1 line
0 pages of HIGHMEM
You don't have any.
Calling the oom-killer in this situation seems drastic though.
Dave
Quoted 5 lines · Dave Jones
Quoted 1 line · Rob Landley
oom-killer: gfp_mask=0x400d2, order=0
something explicitly asked for a highmem page.
Quoted 7 lines
Quoted 1 line
0 pages of HIGHMEM
You don't have any.
Calling the oom-killer in this situation seems drastic though.
Dave
Except that the only difference between this test and the one that succeeds is the value of "/proc/sys/vm/swappiness". With 60 it finishes, with 0 it fails. The same binaries are being run by the same script, and in neither case is there highmem in the kernel.
The test system is a User Mode Linux instance, running a shell script in place of init. As a result, there are very few processes running in this system, and only one is really active at a time.
At the failure point, the shell script calls the "make" of gcc 4.0.2, and far and away the high point of memory usage is gcc's "genattrtab", which creates and then compiles a .c file that causes the system to swap for about 5 minutes before it completes. (This is an extreme memory hog: Before I started feeding UML a swap file, it couldn't complete with only 128 megs of ram, but finished with 256. Now I'm telling UML mem=64M and attaching a 256 megabyte file to the Usermode Block Device driver, to act as a swap partition.)
So at the point of failure, bash is blocked waiting on a child, make is blocked waiting on a child, gcc is building its attrtab pig, and nothing else (no daemons, not even init) is running on the system. It's a pretty straightforward "the VM goes nuts in a low memory situation" case.
If you'd like to reproduce this, I can send you my build script. It's self-contained, downloads all the source code it needs automatically, and either succeeds or reproduces the problem quite deterministically depending on whether or not the "echo 0 > /proc/sys/vm/swappiness" line is present or not.
Rob