Designware about Arm64 supported
Hi Dacai,
Sorry for delayed response. I do not work directly with PCIe these days. Please always keep PCI mailing list in CC.
Quoted 4 lines · Zhudacai
Hi all,
I just use the designware patch for my arm64 board' PCIe .And here is some conflict while I patched it with the Liviu's PCI patch of ARM64.
I just had a quick look on current state of designware driver and Liviu's V10 patchset.
As a first step,
There would be couple of things which we need to get rid of DW driver, before it is usable with generic pci support.
-- Replace pci_common_init_dev with following:
dw_pcie_setup
pci_scan_root_bus (should help in getting rid of dw_pcie_scan_bus)
-- Get rid of 'struct hw_pci dw_pci' and 'sys_to_pcie(struct pci_sys_data *sys)'
-- in order to get rid of dw_pci, you might need
to add following for arch/arm, so that existing platform works:
pcibios_add_device : (should help in getting rid of dw_pcie_map_irq)
-- of_pci_get_host_bridge_resources can be used (may be with some modification) to cleanup most of the code of dw_pcie_host_init.
-- Above should help in working with intx. To use msi, I think you might need to work on core layer a bit. One easiest way, could be to modify pci_scan_root_bus to accept struct msi_chip as additional argument and assign msi_chip to bus->msi in this function.
Quoted 5 lines
however, it's will be accepted at kernel version 3.18 about Liviu's PCI patch of ARM64
(http://patchwork.ozlabs.org/patch/379423/).so ,I wondered if you have some follow-up plan with the designware patch on arm64.
I think Mohit/Jingoo can comment here. What I know, they do not have ARM64 bit platform, so they might not be able to work for designware patch on arm64. But yes, I agree that designware can be modified on top of Liviu's patch to work with ARM 32 bit, while independent of arch/arm/kernel/bios32.c code.
~Pratyush
Quoted 5 lines
Best regards
Dacai