Regression since 4.1
Hello!
in short:
No Kernel since 4.1 boots on my machine.
I can make newer kernels boot, but ONLY when i remove "iommu=on intel_iommu=on" from the cmdline.
If i leave it in, as with all the kernels before and including 4.1, newer kernels dont boot, and in a really not very informative way:
They dont even print a single message to the console, i only see the grub- messages (like "loading kernel" and "loading initial ramdisk") - after these messages NO more output of any kind - also no SysRQ keys working - nothing.
Because of this complete lack of information, i guess its hard to debug for you the cause of this.
Perhaps i can help - but how?
i'm writing from a pure IOMMU-User perspective - i can compile kernels, but never git-bisected, so maybe a hint to a tutorial for that would be great!
Greetings and thanks for your insight!
Tobias
Quoted 13 lines · Tobias Geiger
Hello!
in short:
No Kernel since 4.1 boots on my machine.I can make newer kernels boot, but ONLY when i remove "iommu=on intel_iommu=on" from the cmdline.
If i leave it in, as with all the kernels before and including 4.1, newer kernels dont boot, and in a really not very informative way:
They dont even print a single message to the console, i only see the grub- messages (like "loading kernel" and "loading initial ramdisk") - after these messages NO more output of any kind - also no SysRQ keys working - nothing.
Quoted 6 lines
Because of this complete lack of information, i guess its hard to debug for you the cause of this.
Perhaps i can help - but how?i'm writing from a pure IOMMU-User perspective - i can compile kernels, but never git-bisected, so maybe a hint to a tutorial for that would be great!
Try simply removing the "quiet" and "splash" or "rhgb" options if there are any from the kernel command line in grub first. You can temporarily just editing the commandline manually as you boot. If you don't have a serial console available, at least have a camera handy to take a picture of the screen. You can also add "ignore_loglevel" to the kernel commandline to get more logging. Thanks,
Alex
Hello Alex,
thanks for looking into this.
Nothing helps - not adding "ignore_loglevel" , not removing everything but the most necessary (="BOOT_IMAGE=/boot/vmlinuz-4.3.0-trunk-amd64 ro root=LABEL=dom0root panic=15 iommu=on intel_iommu=on ignore_loglevel") - grub loads the kernel, loads initrd, execs the kernel - and then nothing. no output of any kind from the kernel. no sysrq, no panic-reboot despite panic=15 ... nothing. not even a blinking cursor, just a steady cursor which is still from grub i guess...
It all comes down to kernel > 4.1 && iommu=on = not working here
Hardware is:
Intel DX58SO, Intel CPU i7 920... all pretty solid running for years now, always with iommo=on.
I'd love to debug this further, just dont know how...
Greetings!
Tobias
Am Mittwoch, 9. Dezember 2015, 12:07:48 schrieb Alex Williamson:
Quoted 8 lines
Try simply removing the "quiet" and "splash" or "rhgb" options if there are any from the kernel command line in grub first. You can temporarily just editing the commandline manually as you boot. If you don't have a serial console available, at least have a camera handy to take a picture of the screen. You can also add "
ignore_loglevel" to the kernel commandline to get more logging. Thanks,Alex
Hi Tobias,
Quoted 7 lines · Tobias Geiger
It all comes down to kernel > 4.1 && iommu=on = not working here
Hardware is:
Intel DX58SO, Intel CPU i7 920... all pretty solid running for years now, always with iommo=on.I'd love to debug this further, just dont know how...
Sounds like only bisecting the issue will help here. You can find an introduction on bisecting here:
https://git-scm.com/book/en/v2/Git-Tools-Debugging-with-Git
Would be great if you can find the time to bisect the issue.
Joerg
Quoted 8 lines · Joerg Roedel
Hi Tobias,
Quoted 4 lines · Tobias Geiger
It all comes down to kernel > 4.1 && iommu=on = not working here
Hardware is:
Intel DX58SO, Intel CPU i7 920... all pretty solid running for years
now,
Quoted 4 lines
Quoted 3 lines
always with iommo=on.
I'd love to debug this further, just dont know how...
Quoted 10 lines
Sounds like only bisecting the issue will help here. You can find an introduction on bisecting here:
https://git-scm.com/book/en/v2/Git-Tools-Debugging-with-Git
Would be great if you can find the time to bisect the issue.
Joerg
I can confirm this bug with kernel "4.2.0-16-generic #19-Ubuntu" on an Intel DX58SO board with a W3520 Xeon CPU.
Before I was running 3.16.0 which did not lock up at boot but did have occasional DMAR issues with GPU passthrough while running a Windows 7 gues in Qemu. I don't know if the two are related.