Need help debugging NFSv3+KRB5+PAT (Port Address Translation) problem
Subsystems (2)
Hello everyone,
I need some help debugging a NFSv3 + KRB5 + PAT (Port Address Translation) problem.
We have two hosts behind a firewall and an NFSv3 server outside requiring KRB5 authentication.
1) Client_NAT is using NAT (network address translation),
2) Client_PAT is using PAT (port address translation) to reach the NFSv3 server through the firewall.
Both clients are configured identically in terms of Kerberos and so on.
Mounting an NFSv3 share now fails on Client_PAT with the message:
RPC: server SERVERNAME requires stronger authentication. On Client_NAT, mounting succeeds.
We strongly suspect the port address translation to be the reason for the failure, but would need help confirming this and advice on how to fix it.
Please find here the RPC debug logs fromClient_NAT: http://pastebin.com/9RANqVgYClient_PAT: http://pastebin.com/TiscNVqW
Here is a DIFF between the two: http://pastebin.com/wCg7WyYd
I'm grateful for any help on this problem!
Best regards,
Joschi Brauchle
Signature · 10 lines
Dipl.-Ing. Joschi Brauchle, M.S. Institute for Communications Engineering (LNT) Technische Universitaet Muenchen (TUM) 80290 Munich, Germany Tel (work): +49 89 289-23474 Fax (work): +49 89 289-23490 E-mail: [email protected] Web: http://www.lnt.ei.tum.de/
Quoted 27 lines · On Fri, 26 Sep 2014 17:31:55 +0200 Joschi Brauchle <[email protected]>…
Hello everyone,
I need some help debugging a NFSv3 + KRB5 + PAT (Port Address Translation) problem.
We have two hosts behind a firewall and an NFSv3 server outside requiring KRB5 authentication.
1)
Client_NATis using NAT (network address translation),
2)Client_PATis using PAT (port address translation) to reach the NFSv3 server through the firewall.Both clients are configured identically in terms of Kerberos and so on.
Mounting an NFSv3 share now fails on
Client_PATwith the message:
RPC: server SERVERNAME requires stronger authentication. OnClient_NAT, mounting succeeds.We strongly suspect the port address translation to be the reason for the failure, but would need help confirming this and advice on how to fix it.
Please find here the RPC debug logs from
Client_NAT: http://pastebin.com/9RANqVgYClient_PAT: http://pastebin.com/TiscNVqW
Here is a DIFF between the two: http://pastebin.com/wCg7WyYd
Quoted 4 lines
I'm grateful for any help on this problem!
Best regards,
Joschi Brauchle
I'm not terribly familiar with the PAT vs. NAT distinction, but many NFS servers require you to use privileged ports to connect to them. Is your PAT client having its privileged port converted to a non-privileged one?
If so (and if the server is Linux-based) then you can try to get around that by exporting with the "insecure" export option.
Signature · 1 line
Jeff Layton <[email protected]>
Quoted 35 lines · Jeff Layton
Quoted 27 lines · On Fri, 26 Sep 2014 17:31:55 +0200 Joschi Brauchle <[email protected]>…
Hello everyone,
I need some help debugging a NFSv3 + KRB5 + PAT (Port Address Translation) problem.
We have two hosts behind a firewall and an NFSv3 server outside requiring KRB5 authentication.
1)
Client_NATis using NAT (network address translation),
2)Client_PATis using PAT (port address translation) to reach the NFSv3 server through the firewall.Both clients are configured identically in terms of Kerberos and so on.
Mounting an NFSv3 share now fails on
Client_PATwith the message:
RPC: server SERVERNAME requires stronger authentication. OnClient_NAT, mounting succeeds.We strongly suspect the port address translation to be the reason for the failure, but would need help confirming this and advice on how to fix it.
Please find here the RPC debug logs from
Client_NAT: http://pastebin.com/9RANqVgYClient_PAT: http://pastebin.com/TiscNVqW
Here is a DIFF between the two: http://pastebin.com/wCg7WyYdQuoted 4 lines
I'm grateful for any help on this problem!
Best regards,
Joschi Brauchle
Quoted 7 lines
I'm not terribly familiar with the PAT vs. NAT distinction, but many NFS servers require you to use privileged ports to connect to them. Is your PAT client having its privileged port converted to a non-privileged one?
If so (and if the server is Linux-based) then you can try to get around that by exporting with the "insecure" export option.
We do not have control over the NFS server, but from the firewall logs I can see that the PAT client trying to access the server with an originally privileged port (<1024) gets translated to a non-privileged one. Shortly after that, the mount fails.
So I guess this is the problem! Thanks for the hint.