get_maintainers.pl doesn't actually get the real MAINTAINERS?
Hello,
I try running scripts/get_maintainers.pl but it doesn't seem to get the real maintainers properly. Please note this is run against the current MAINTAINERS file.
One Example: I would expect drivers/mmc/host/sdhci-bcm2835.c to be maintained by Stephen Warren based on drivers/*/*bcm2835* below. But the get_maintainers.pl script does not seem to process the information in such a way. So what needs to be corrected - the script or the syntax used in the MAINTAINERS file?
BROADCOM BCM2835 ARM ARCHICTURE
M: Stephen Warren <[email protected]>
L: [email protected] (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
S: Maintained
F: arch/arm/mach-bcm/board_bcm2835.c
F: arch/arm/boot/dts/bcm2835*
F: arch/arm/configs/bcm2835_defconfig
F: drivers/*/*bcm2835*
Regards,
Scott
Quoted 8 lines · Scott Branden
Hello,
I try running
scripts/get_maintainers.plbut it doesn't seem to get the real maintainers properly. Please note this is run against the currentMAINTAINERSfile.One Example: I would expect
drivers/mmc/host/sdhci-bcm2835.cto be maintained by Stephen Warren based ondrivers/*/*bcm2835*below.
get_maintainers doesn't use * as a depth wildcard
*/ matches a single top level directory level */*/ matches one level below the top directory level.
Quoted 5 lines
But
the get_maintainers.pl script does not seem to process the information in such a way. So what needs to be corrected - the script or the syntax used in theMAINTAINERSfile?
Quoted 9 lines
BROADCOM BCM2835 ARM ARCHICTURE
M: Stephen Warren <[email protected]>
L: [email protected] (moderated for non-subscribers)
T: gitgit://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
S: Maintained
F:arch/arm/mach-bcm/board_bcm2835.c
F:arch/arm/boot/dts/bcm2835*
F:arch/arm/configs/bcm2835_defconfig
F:drivers/*/*bcm2835*
F: drivers/*/*/*bmc2835*
Quoted 30 lines · Joe Perches
Quoted 8 lines · Scott Branden
Hello,
I try running
scripts/get_maintainers.plbut it doesn't seem to get the real maintainers properly. Please note this is run against the currentMAINTAINERSfile.One Example: I would expect
drivers/mmc/host/sdhci-bcm2835.cto be maintained by Stephen Warren based ondrivers/*/*bcm2835*below.
get_maintainersdoesn't use * as a depth wildcard*/ matches a single top level directory level */*/ matches one level below the top directory level.
Quoted 5 lines
But
the get_maintainers.pl script does not seem to process the information in such a way. So what needs to be corrected - the script or the syntax used in theMAINTAINERSfile?Quoted 9 lines
BROADCOM BCM2835 ARM ARCHICTURE
M: Stephen Warren <[email protected]>
L: [email protected] (moderated for non-subscribers)
T: gitgit://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
S: Maintained
F:arch/arm/mach-bcm/board_bcm2835.c
F:arch/arm/boot/dts/bcm2835*
F:arch/arm/configs/bcm2835_defconfig
F:drivers/*/*bcm2835*
Quoted 1 line
F:
drivers/*/*/*bmc2835*
Thanks for the explanation. So somebody should really do the following to maintain any files no matter where they are located?
F: */*bcm2835*
F: */*/*bcm2835*
F: */*/*/*bcm2835*
F: */*/*/*/*bcm2835*
F: */*/*/*/*/*bcm2835*
F: */*/*/*/*/*/*bcm2835*
F: */*/*/*/*/*/*/*bcm2835*
Or, can a recursive option be added in the script?
Quoted 2 lines
Quoted 42 lines · Scott Branden
Quoted 30 lines · Joe Perches
Quoted 8 lines · Scott Branden
Hello,
I try running
scripts/get_maintainers.plbut it doesn't seem to get the real maintainers properly. Please note this is run against the currentMAINTAINERSfile.One Example: I would expect
drivers/mmc/host/sdhci-bcm2835.cto be maintained by Stephen Warren based ondrivers/*/*bcm2835*below.
get_maintainersdoesn't use * as a depth wildcard*/ matches a single top level directory level */*/ matches one level below the top directory level.
Quoted 5 lines
But
the get_maintainers.pl script does not seem to process the information in such a way. So what needs to be corrected - the script or the syntax used in theMAINTAINERSfile?Quoted 9 lines
BROADCOM BCM2835 ARM ARCHICTURE
M: Stephen Warren <[email protected]>
L: [email protected] (moderated for non-subscribers)
T: gitgit://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
S: Maintained
F:arch/arm/mach-bcm/board_bcm2835.c
F:arch/arm/boot/dts/bcm2835*
F:arch/arm/configs/bcm2835_defconfig
F:drivers/*/*bcm2835*Quoted 1 line
F:
drivers/*/*/*bmc2835*Thanks for the explanation. So somebody should really do the following to maintain any files no matter where they are located?
F: */*bcm2835*
F: */*/*bcm2835*
F: */*/*/*bcm2835*
F: */*/*/*/*bcm2835*
F: */*/*/*/*/*bcm2835*
F: */*/*/*/*/*/*bcm2835*
F: */*/*/*/*/*/*/*bcm2835*
Quoted 1 line
Or, can a recursive option be added in the script?
Hasn't been much of a need for that but knock yourself out if you think something like a ... might be useful.
Look for function "file_match_pattern" if you want to extend it.
There is a file name matching option "N:" that does something similar.
Difference is that F: patterns matches do not use git history by default to find other people that have submitted patches, N: does.