airo.c code formatting
DO NOT REPLY TO THIS EMAIL BUT TO: jdthood_AT_yahoo.co.uk
Quoted 7 lines
Ok... I've been meaning to ask something about this. I've
been working with the Aironet cards on some wireless security projects. I had been using a patched version of the aironet driver from the pcmcia project with the 2.2 kernels but recently started looking at the 2.4.x kernels and the drivers included there in.
I'm a bit confused by this:
Quoted 7 lines
[mhw@alcove linux]$ find . -name airo\*
./drivers/net/aironet4500.h./drivers/net/aironet4500_core.c./drivers/net/pcmcia/aironet4500_cs.c./drivers/net/aironet4500_card.c./drivers/net/aironet4500_proc.c./drivers/net/aironet4500_rid.c
The above are the "old" kernel Aironet drivers.
Quoted 2 lines
./drivers/net/wireless/airo.c./drivers/net/wireless/airo_cs.c
These are the "new" kernel Aironet drivers.
These files are unrelated to those above.
These files appear to be newer than either those in pcmcia-cs or those in the latest (1.5.000) Cisco driver, which are based on the same original code.
The advantage of the pcmcia-cs drivers is that they work with earlier kernels.
The advantage of the Cisco drivers is that they are Cisco-approved [tm].
--
Thomas Hood
DO NOT REPLY TO THIS EMAIL BUT TO: jdthood_AT_yahoo.co.uk
_______________________________________________________
Send a cool gift with your E-Card
http://www.bluemountain.com/giftcenter/