Re: [ Re: unhandled vm exit: 0x80000021 vcpu_id 0]

Re: unhandled vm exit: 0x80000021 vcpu_id 0 Sheng Yang 1 participant 1 message Oct 9, 2008 1 message not in the archive KVM

lore

Share & tools

lore

A message that is not in the archive (sent off-list or not yet received): 5449202.1223421374856.JavaMail.root@ps1

Sheng Yang

author

2008-10-09 14:58 UTC #1 lore raw

Quoted 5 lines · On Wed, Oct 8, 2008 at 7:16 AM, [email protected] <[email protected]> wrote:

Hi Yang,
I often hibernate my Linux, so may be that the loadmodule message is missing in the dmesg because it is too old.
I have rebooted the system and I attach a "clean" dmesg.

Yeah, now I can see the load info of kvm-76.

Quoted 3 lines

What means "Windows always trig a apic write error before Jan's patch make them slience"? which Windows?

At least Windows XP like to do this, now for upstream, Jan's patch clean it.

Quoted 4 lines

However, when I try ro run qemu/kvm using the winxp image, no error happens in the dmesg. I can see the error as output of the qemu/kvm command.

It's indeed hard to debug with so limit info... I still suggest you to fill a bug first.

And if you have time, please try the attached patch and update info.

--
regards
Yang, Sheng

Quoted 168 lines

Reagrds,
Pier Luigi
-------- Original Message --------
Subject:        Re: unhandled vm exit: 0x80000021 vcpu_id 0
Date:   Fri, 3 Oct 2008 08:57:31 +0800
From:   Sheng Yang <[email protected]>
To:     [email protected] <[email protected]>
CC: [email protected], [email protected]
References: <25010601.1222985780681.JavaMail.root@ps1>
Quoted 3 lines · On Fri, Oct 03, 2008 at 12:16:20AM +0200, [email protected] wrote:
Hi,
I understand the "particularity" (checkpoint) of this case.
Hi Pier
Thanks for your understanding. :)
Quoted 2 lines
Any way, in the attachment the dmesg log and the output of the
dmesg
Quoted 1 line
command.
But it's strange that I almost can't see anything correlated with kvm in the
log. If you built kvm as a modules(I suppose you did it because you tried
many versions), at least something like "load kvm module xxx" should appear(and Windows always trig a apic write error before Jan's patch make
them slience).
Is this the dmesg when the error was happening?
--
regards
Yang, Sheng
Quoted 7 lines
thanks for your helpfulness.
Regards.
Quoted 1 line · Sheng Yang
On Mon, Sep 29, 2008 at 6:18 PM, [email protected] <p.
quida@tiscali.
Quoted 5 lines
Quoted 4 lines · it> wrote:
Quoted 4 lines
Hi,
I have successfully installed windows XP SP2 on kvm. After the installation I have launched the setup of "Checkpoint -
Pointsec"
Quoted 7 lines
for
Quoted 6 lines
Quoted 2 lines
the entire disk encryption.
Hi Pier
Can you issue a bug for this? But sadly "Checkpoint" is a
commercial
Quoted 5 lines
Quoted 5 lines
software, we may not deal with it directly and immediately.
Quoted 2 lines
The first step of installation was run successfully, but when the system reboots and "Pointsec" loads the initial code, the
following
Quoted 3 lines
Quoted 2 lines
Quoted 2 lines
error happens:
======================================================================================
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
unhandled vm exit: 0x80000021 vcpu_id 0
rax 0000000000000007 rbx 0000000000001490 rcx 0000000000000000
rdx
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
00000000000019a0
rsi 0000000000000000 rdi 0000000000000000 rsp 0000000000000080
rbp
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
00000000000096bf
r8 0000000000000000 r9 0000000000000000 r10 0000000000000000
r11
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
0000000000000000
r12 0000000000000000 r13 0000000000000000 r14 0000000000000000
r15
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
0000000000000000
rip 000000000000002a rflags 00023202
cs 14a2 (00000000/00000000 p 0 dpl 0 db 0 s 0 type 9 l 0 g 0 avl
0)
Quoted 1 line
Quoted 1 line
Quoted 1 line
ds 19a0 (00000000/00000000 p 0 dpl 0 db 0 s 0 type 0 l 0 g 0 avl
0)
Quoted 1 line
Quoted 1 line
Quoted 1 line
es 1a31 (00000000/00000000 p 0 dpl 0 db 0 s 0 type 0 l 0 g 0 avl
0)
Quoted 1 line
Quoted 1 line
Quoted 1 line
ss 1a29 (00000000/00000000 p 0 dpl 0 db 0 s 0 type 1 l 0 g 0 avl
0)
Quoted 1 line
Quoted 1 line
Quoted 1 line
fs 0000 (00000000/00000000 p 0 dpl 0 db 0 s 0 type 0 l 0 g 0 avl
0)
Quoted 1 line
Quoted 1 line
Quoted 1 line
gs 0000 (00000000/00000000 p 0 dpl 0 db 0 s 0 type 0 l 0 g 0 avl
0)
Quoted 1 line
Quoted 1 line
Quoted 1 line
tr 0058 (00201ffa/0000ffff p 1 dpl 0 db 0 s 0 type b l 0 g 0 avl
0)
Quoted 1 line
Quoted 1 line
Quoted 1 line
ldt 0000 (00000000/00000000 p 0 dpl 0 db 0 s 0 type 0 l 0 g 0
avl
Quoted 7 lines
0)
Quoted 6 lines
Quoted 4 lines
gdt 200000/1dd8
idt 201df0/188
cr0 80000019 cr2 0 cr3 1440000 cr4 0 cr8 0 efer 0
What's this... CR0.PE clear, CR0.PG set... And segment register
also
Quoted 6 lines
Quoted 5 lines
strange. May be some real emulation wrong...
Quoted 2 lines
Aborted
======================================================================================
Quoted 13 lines
Quoted 1 line
Quoted 1 line
I am able to boot this system (image) using qemu (with kqemu
enabled
Quoted 2 lines
Quoted 2 lines
for user code), but not using kvm.
I have also tried with the options: -no-kvm-irqchip -no-kvm-pit -
no-
Quoted 8 lines
Quoted 4 lines
acpi without success. Only the -no-kvm option works.
I have tried these kvm releases: from 65 to 76; and these kernel (vanilla) releases: from 2.6.23.1 to 2.6.26.5.
Thanks for your patient...
Quoted 1 line
My computer is a Dell D630 equipped with Intel(R) Core(TM)2 Duo
CPU
Quoted 16 lines
Quoted 2 lines
Quoted 2 lines
T7300 @ 2.00GHz
The HOST Linux distributions used are: Fedora 8/9 for i386, and
Fedora
Quoted 6 lines
Quoted 2 lines
9 for x86_64.
Can you show dmesg as well? That's also helps.
Quoted 3 lines
_______________________________________________________________
Con Tiscali Adsl 8 Mega navighi SENZA LIMITI e GRATIS PER I PRIMI
TRE MESI. In seguito paghi solo ??? 19,95 al mese. Attivala subito, l? offerta è valida fino al 02/10/2008! http://abbonati.tiscali.
it/promo/adsl8mega/
_______________________________________________________________
Visita Tiscali Shopping e troverai tutto quello che cerchi ai prezzi migliori
http://shopping.tiscali.it/

Signature · 2 lines

regards,
Yang, Sheng

libkvm/libkvm.c +1 -0

Index: kvm-76/libkvm/libkvm.c
===================================================================
@@ -843,6 +843,7 @@
 			fprintf(stderr, "unhandled vm exit: 0x%x vcpu_id %d\n",
 				(unsigned)run->hw.hardware_exit_reason, vcpu);
 			kvm_show_regs(kvm, vcpu);
+			kvm_show_code(kvm, vcpu);
 			abort();
 			break;
 		case KVM_EXIT_FAIL_ENTRY: