Accesing data on (old) XFS devices
Hi all,
I have 2 SCSI disks which were used on an (old) Silicon Graphics running on IRIX 6.5.x I need to recover the data from those disks, dump them somewhere else and forget about the SGI disks...
OpenSUSE 11 sees the devices correctly and with fdisk I can see the partitions:
--
# fdisk -l /dev/sda
Disk /dev/sda (SGI disk label): 255 heads, 63 sectors, 4865 cylinders Units = cylinders of 16065 * 512 bytes
----- partitions -----
Pt# Device Info Start End Sectors Id System 1: /dev/sda1 boot 66 2213 34510368 a SGI xfs 2: /dev/sda2 swap 1 65 1048576 3 SGI raw 9: /dev/sda3 0 0 4096 0 SGI volhdr
11: /dev/sda4 0 2213 35563040 6 SGI volume
----- Bootinfo -----
Bootfile: /unix
----- Directory Entries -----
0: sash sector 2 size 273408 1: ide sector 536 size 249856 2: symmon sector 1024 size 1113600
# fdisk -l /dev/sdd
Disk /dev/sdd (SGI disk label): 255 heads, 63 sectors, 9729 cylinders Units = cylinders of 16065 * 512 bytes
----- partitions -----
Pt# Device Info Start End Sectors Id System 3: /dev/sdd1 1 16 262144 3 SGI raw 4: /dev/sdd2 17 32 262144 3 SGI raw 5: /dev/sdd3 33 293 4194304 3 SGI raw 6: /dev/sdd4 294 555 4194304 3 SGI raw 7: /dev/sdd5 556 816 4194304 3 SGI raw 8: /dev/sdd6 817 1077 4194304 3 SGI raw 9: /dev/sdd7 0 0 4096 0 SGI volhdr
11: /dev/sdd8 0 2213 35563040 6 SGI volume
----- Bootinfo -----
Bootfile: /unix
----- Directory Entries -----
--
I added the following to /etc/raw:
--
raw1:sdd1
raw2:sdd2
raw3:sdd3
raw4:sdd4
raw5:sdd5
raw6:sdd6
--
...but then I get this error:
--
# /etc/init.d/raw start bind /dev/raw/raw1 to /dev/sdd1... failed bind /dev/raw/raw2 to /dev/sdd2... failed bind /dev/raw/raw3 to /dev/sdd3... failed bind /dev/raw/raw4 to /dev/sdd4... failed bind /dev/raw/raw5 to /dev/sdd5... failed bind /dev/raw/raw6 to /dev/sdd6... failed --
Later on I found this thread:
http://oss.sgi.com/archives/xfs/2005-11/msg00376.html
and this FAQ:
http://linux.math.tifr.res.in/programming-doc/xfs/faq.html#xfsmountfail
when I run xfs_repair -n /dev/sda or /dev/sdd (-n = no modify mode) it yields the following message:
--
Sorry, could not find valid secondary superblock
Exiting now.
--
So...
my questions are: how destructive can a xfs_repair be in terms of destroying all the data (disk image is already made) be? and is there any way to access those devices??
I first asked this questions on the SuSE lists and I've been redirected here ;-)
TIA,
Martin
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 48 lines · Martin Mielke
Hi all,
I have 2 SCSI disks which were used on an (old) Silicon Graphics running on IRIX 6.5.x I need to recover the data from those disks, dump them somewhere else and forget about the SGI disks...
OpenSUSE 11 sees the devices correctly and with fdisk I can see the partitions:
--
# fdisk -l /dev/sdaDisk
/dev/sda(SGI disk label): 255 heads, 63 sectors, 4865 cylinders Units = cylinders of 16065 * 512 bytes----- partitions -----
Pt# Device Info Start End Sectors Id System 1: /dev/sda1 boot 66 2213 34510368 a SGI xfs 2: /dev/sda2 swap 1 65 1048576 3 SGI raw 9: /dev/sda3 0 0 4096 0 SGI volhdr11:
/dev/sda40 2213 35563040 6 SGI volume
----- Bootinfo -----
Bootfile: /unix
----- Directory Entries -----0: sash sector 2 size 273408 1: ide sector 536 size 249856 2: symmon sector 1024 size 1113600# fdisk -l /dev/sddDisk
/dev/sdd(SGI disk label): 255 heads, 63 sectors, 9729 cylinders Units = cylinders of 16065 * 512 bytes----- partitions -----
Pt# Device Info Start End Sectors Id System 3: /dev/sdd1 1 16 262144 3 SGI raw 4: /dev/sdd2 17 32 262144 3 SGI raw 5: /dev/sdd3 33 293 4194304 3 SGI raw 6: /dev/sdd4 294 555 4194304 3 SGI raw 7: /dev/sdd5 556 816 4194304 3 SGI raw 8: /dev/sdd6 817 1077 4194304 3 SGI raw 9: /dev/sdd7 0 0 4096 0 SGI volhdr11:
/dev/sdd80 2213 35563040 6 SGI volume
----- Bootinfo -----
Bootfile: /unix
----- Directory Entries -------
Quoted 9 lines
I added the following to
/etc/raw:
--
raw1:sdd1
raw2:sdd2
raw3:sdd3
raw4:sdd4
raw5:sdd5
raw6:sdd6
--
You shouldn't need to play games w/ raw devices, I think.
I'd try:
# file -s /dev/sdd? # file -s /dev/sda?
and see which partitions claim to hold xfs filesystems (I can't recall offhand how the sgi partitioning works...)
Those *should* just mount right up. If they have dirty irix-format logs, you'll need to either mount (to replay the log) & unmount cleanly under irix, or zap it with xfs_repair -L
-Eric
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs