new test
Hello Liu Chuansheng,
I have good news, your patch based on /drivers/pci/quirks.c works very well,
I have no problems after a standby mode, my JMB363/368 SATA/IDE JMicron Pcie works without problems
Quoted 56 lines · Chuansheng
Thanks Barto.
Could you try below patch? I made the change in file
quirks.c.drivers/pci/quirks.c +0
-0index 90acb32..b40485f 100644
---
a/drivers/pci/quirks.c+++
b/drivers/pci/quirks.cdrivers/pci/quirks.c +1
-0@@ -29,6 +29,21 @@#include "pci.h" /* +* For JMicron chips, we need to disable the async_suspend method, otherwise
+ * they will hit the power-on issue when doing device resume, add one quick
+ * solution to disable the
async_suspendmethod.+ */
drivers/pci/quirks.c +9
-0+static void pci_async_suspend_fixup (struct pci_dev *pdev) +{ +/* +* disabling the async_suspend method for JMicron chips to +* avoid device resuming issue. +*/ +device_disable_async_suspend (&pdev->dev); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID,
pci_async_suspend_fixup);drivers/pci/quirks.c +2
-0+ +/* * Decoding should be disabled for a PCI device during BAR sizing to avoid * conflict. But doing so may cause problems on host bridge and perhaps other
Quoted 7 lines
* key system devices. For devices that need to have mmio decoding
always-on,
drivers/pci/quirks.c +0 -0
@@ -29,6 +29,21 @@
#include "pci.h"
/*
+ * For JMicron chips, we need to disable the async_suspend method, otherwise
+ * they will hit the power-on issue when doing device resume, add one quick
+ * solution to disable the async_suspend method.
+ */
+static void pci_async_suspend_fixup(struct pci_dev *pdev)
+{
+ /*
+ * disabling the async_suspend method for JMicron chips to + * avoid device resuming issue. + */
+ device_disable_async_suspend(&pdev->dev);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, pci_async_suspend_fixup); +
+/*
* Decoding should be disabled for a PCI device during BAR sizing to avoid
* conflict. But doing so may cause problems on host bridge and perhaps other
* key system devices. For devices that need to have mmio decoding always-on,