cpuidle: A few improvements for ARM cpuidle via DT
Subsystems (2)
Hi Rafael,
this pull request, based on 3.18-rc5, contains a set of changes from Lorenzo Pieralisi.
* Added a 'status' definition flag in the DT to specify the
unsupported firmware idle states and ignore those states in the parsing code when initializing the cpuidle driver
* Added an idle state description in the DT. As the idle states are
not standardized on ARM, the description gives information about the idle state
* Removed duplicate error message in the arm64 cpuidle drivers
Thanks !
-- Daniel
The following changes since commit fc14f9c1272f62c3e8d01300f52467c0d9af50f9:
Linux 3.18-rc5 (2014-11-16 16:36:20 -0800)
are available in the git repository at:
http://git.linaro.org/git-ro/people/daniel.lezcano/linux.git cpuidle/3.19
for you to fetch changes up to 18f95a3640dbf421ab9532e517070a0c1cd4d582:
drivers: cpuidle: Remove cpuidle-arm64 duplicate error messages
(2014-11-19 10:16:28 +0100)
----------------------------------------------------------------
Lorenzo Pieralisi (3):
drivers: cpuidle: Add status property to ARM idle states
drivers: cpuidle: Add idle-state-name description to ARM idle states
drivers: cpuidle: Remove cpuidle-arm64 duplicate error messages
Documentation/devicetree/bindings/arm/idle-states.txt | 20 ++++++++++++++++++++ drivers/cpuidle/cpuidle-arm64.c | 13 ++----------- drivers/cpuidle/dt_idle_states.c | 10 +++++++++- 3 files changed, 31 insertions(+), 12 deletions(-)
Signature · 5 lines
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
PATCH 1/3 drivers: cpuidle: Add status property to ARM idle states
From: Lorenzo Pieralisi <[email protected]>
On some platforms the device tree bindings must provide the kernel with a status flag for idle states, that defines whether the idle state is operational or not in the current configuration.
This patch adds a status property to the ARM idle states compliant with ePAPR v1.1 and updates the DT parsing code accordingly.
--- Documentation/devicetree/bindings/arm/idle-states.txt | 14 ++++++++++++++ drivers/cpuidle/dt_idle_states.c | 3 +++ 2 files changed, 17 insertions(+)
Documentation/devicetree/bindings/arm/idle-states.txt +14 -0
@@ -317,6 +317,20 @@ follows: In such systems entry-latency-us + exit-latency-us will exceed wakeup-latency-us by this duration. + - status: + Usage: Optional + Value type: <string> + Definition: A standard device tree property [5] that indicates + the operational status of an idle-state. + If present, it shall be: + "okay": to indicate that the idle state is + operational. + "disabled": to indicate that the idle state has + been disabled in firmware so it is not + operational. + If the property is not present the idle-state must + be considered operational. + In addition to the properties listed above, a state node may require additional properties specifics to the entry-method defined in the idle-states node, please refer to the entry-method bindings
drivers/cpuidle/dt_idle_states.c +3 -0
@@ -169,6 +169,9 @@ int dt_init_idle_driver(struct cpuidle_driver *drv,if (!state_node)break ; +if (!of_device_is_available (state_node)) +continue ; +if (!idle_state_valid (state_node, i, cpumask)) {pr_warn ("%s idle state not valid, bailing out\n" , state_node->full_name);
Signature · 1 line
1.9.1
PATCH 2/3 drivers: cpuidle: Add idle-state-name description to ARM idle states
From: Lorenzo Pieralisi <[email protected]>
On ARM machines, where generally speaking the idle state numbering has no fixed and standard meaning it is useful to provide a description of the idle state inner workings for benchmarking and monitoring purposes.
This patch adds a property to the idle states bindings that if present gives platform firmware a means of describing the idle state and export the string description to user space.
The patch updates the DT parsing code accordingly to take the description, if present, into consideration.
--- Documentation/devicetree/bindings/arm/idle-states.txt | 6 ++++++ drivers/cpuidle/dt_idle_states.c | 7 ++++++- 2 files changed, 12 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/arm/idle-states.txt +6 -0
@@ -331,6 +331,12 @@ follows: If the property is not present the idle-state must be considered operational. + - idle-state-name: + Usage: Optional + Value type: <string> + Definition: A string used as a descriptive name for the idle + state. + In addition to the properties listed above, a state node may require additional properties specifics to the entry-method defined in the idle-states node, please refer to the entry-method bindings
drivers/cpuidle/dt_idle_states.c +6 -1
@@ -27,6 +27,7 @@ static int init_state_node(struct cpuidle_state *idle_state, {int err;const struct of_device_id *match_id; +const char *desc; match_id =of_match_node (matches, state_node);if (!match_id)
@@ -73,6 +74,10 @@ static int init_state_node(struct cpuidle_state *idle_state,return -EINVAL ; } + err =of_property_read_string (state_node,"idle-state-name" , &desc); +if (err) + desc = state_node->name; + idle_state->flags =CPUIDLE_FLAG_TIME_VALID ;if (of_property_read_bool (state_node,"local-timer-stop" )) idle_state->flags |=CPUIDLE_FLAG_TIMER_STOP ;
@@ -82,7 +87,7 @@ static int init_state_node(struct cpuidle_state *idle_state,* and desc become string pointers */ strncpy (idle_state->name, state_node->name,CPUIDLE_NAME_LEN -1 ); -strncpy (idle_state->desc, state_node->name,CPUIDLE_DESC_LEN -1 ); +strncpy (idle_state->desc, desc,CPUIDLE_DESC_LEN -1 );return 0 ; }
Signature · 1 line
1.9.1
PATCH 3/3 drivers: cpuidle: Remove cpuidle-arm64 duplicate error messages
In reply to Daniel LezcanoFrom: Lorenzo Pieralisi <[email protected]>
Current CPUidle driver for arm64 machines spits errors upon idle state initialization and cpuidle driver registration failures. These error messages are already printed in core code so there is no need to print them again.
This patch removes the duplicate print messages from the cpuidle-arm64 driver.
--- drivers/cpuidle/cpuidle-arm64.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-)
drivers/cpuidle/cpuidle-arm64.c +2 -11
@@ -104,11 +104,8 @@ static int __init arm64_idle_init(void)* reason to initialize the idle driver if only wfi is supported. */ ret =dt_init_idle_driver (drv, arm64_idle_state_match,1 ); -if (ret <=0 ) { -if (ret) -pr_err ("failed to initialize idle states\n" ); +if (ret <=0 )return ret ? : -ENODEV ; - }/* * Call arch CPU operations in order to initialize
@@ -122,12 +119,6 @@ static int __init arm64_idle_init(void) } } - ret =cpuidle_register (drv,NULL ); -if (ret) { -pr_err ("failed to register cpuidle driver\n" ); -return ret; - } - -return 0 ; +return cpuidle_register (drv,NULL ); }device_initcall (arm64_idle_init);
Signature · 1 line
1.9.1
Quoted 25 lines · Daniel Lezcano
Hi Rafael,
this pull request, based on 3.18-rc5, contains a set of changes from Lorenzo Pieralisi.
* Added a 'status' definition flag in the DT to specify the
unsupported firmware idle states and ignore those states in the parsing code when initializing the cpuidle driver* Added an idle state description in the DT. As the idle states are
not standardized on ARM, the description gives information about the idle state* Removed duplicate error message in the arm64 cpuidle drivers
Thanks !
-- Daniel
The following changes since commit
fc14f9c1272f62c3e8d01300f52467c0d9af50f9:Linux 3.18-rc5 (2014-11-16 16:36:20 -0800)
Quoted 8 lines
are available in the git repository at:
http://git.linaro.org/git-ro/people/daniel.lezcano/linux.git cpuidle/3.19
for you to fetch changes up to
18f95a3640dbf421ab9532e517070a0c1cd4d582:drivers: cpuidle: Remove cpuidle-arm64 duplicate error messages
(2014-11-19 10:16:28 +0100)
Pulled, but I had a conflict with one patch from you I'd already queued up for 3.19-rc1.
Can you please have a look at my bleeding-edge branch and check if I resolved the conflict correctly?
Signature · 2 lines
I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center.
Quoted 32 lines · Rafael J. Wysocki
Quoted 31 lines · Daniel Lezcano
Hi Rafael,
this pull request, based on 3.18-rc5, contains a set of changes from Lorenzo Pieralisi.
* Added a 'status' definition flag in the DT to specify the
unsupported firmware idle states and ignore those states in the parsing code when initializing the cpuidle driver* Added an idle state description in the DT. As the idle states are
not standardized on ARM, the description gives information about the idle state* Removed duplicate error message in the arm64 cpuidle drivers
Thanks !
-- Daniel
The following changes since commit
fc14f9c1272f62c3e8d01300f52467c0d9af50f9:Linux 3.18-rc5 (2014-11-16 16:36:20 -0800)are available in the git repository at:
http://git.linaro.org/git-ro/people/daniel.lezcano/linux.git cpuidle/3.19
for you to fetch changes up to
18f95a3640dbf421ab9532e517070a0c1cd4d582:
Quoted 8 lines
Quoted 2 lines
drivers: cpuidle: Remove cpuidle-arm64 duplicate error messages
(2014-11-19 10:16:28 +0100)Pulled, but I had a conflict with one patch from you I'd already queued up for 3.19-rc1.
Can you please have a look at my bleeding-edge branch and check if I resolved the conflict correctly?
Hi Rafael,
yes the conflict is correctly resolved.
Thanks
-- Daniel
Signature · 5 lines
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog