help on using buildman
Simon,
Can you shed some light on my trouble? I am trying to use buildman for regression tests. I got inconsistency and am trying to find out why. Take one example MPC832XEMDS_HOST_66 in this case (I randomly pick a failed board)
On one computer
$ ./tools/buildman/buildman -b working_upstream_qoriq --force-build --force-reconfig MPC832XEMDS_HOST_66 -ve No section: 'make-flags' winegcc: gcc-4.5 failed boards.cfg is up to date. Nothing to do. Building 15 commits for 1 boards (1 thread, 4 jobs per thread) 01: ARM: atmel: add sama5d4 xplained ultra board support 02: qe: add u-qe support to arm board 03: qe: add qe support to ls1021aqds 04: qe: add qe support for ls1021a-twr board 05: arm: ls102xa: Fixed a register definition error 06: u_qe: add u_qe_upload_firmware for u_qe 07: powerpc: Move fsl_errata.h out of arch/powerpc 08: driver/usb/fsl: Make FSL USB driver common 09: drivers: usb: fsl: Define USB configs for LS102XA 10: ls1: config: Enable USB EHCI Host on LS1021AQDS 11: arm: ls102xa: Add snoop disable for slave port 0, 1 and 2 12: arm: ls102xa: Remove bit reversing for SCFG registers 13: ls102xa: ifc: nor: fix the write issue when bytes unaligned 14: arm: ls102xa: Add SystemID EEPROM support for LS1021ATWR board 15: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing 15 0 0 /15 MPC832XEMDS_HOST_66
No error.
On another computer
$ ./tools/buildman/buildman -b working_upstream_qoriq --force-build --force-reconfig MPC832XEMDS_HOST_66 -se No section: 'make-flags' boards.cfg is up to date. Nothing to do. Summary of 15 commits for 1 boards (1 thread, 24 jobs per thread) 01: ARM: atmel: add sama5d4 xplained ultra board support powerpc: + MPC832XEMDS_HOST_66 +make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. +make: *** [sub-make] Error 2 02: qe: add u-qe support to arm board powerpc: MPC832XEMDS_HOST_66 -make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. -make: *** [sub-make] Error 2 03: qe: add qe support to ls1021aqds powerpc: + MPC832XEMDS_HOST_66 +make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. +make: *** [sub-make] Error 2 04: qe: add qe support for ls1021a-twr board 05: arm: ls102xa: Fixed a register definition error powerpc: MPC832XEMDS_HOST_66 -make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. -make: *** [sub-make] Error 2 06: u_qe: add u_qe_upload_firmware for u_qe powerpc: + MPC832XEMDS_HOST_66 +make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. +make: *** [sub-make] Error 2 07: powerpc: Move fsl_errata.h out of arch/powerpc 08: driver/usb/fsl: Make FSL USB driver common powerpc: MPC832XEMDS_HOST_66 -make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. -make: *** [sub-make] Error 2 09: drivers: usb: fsl: Define USB configs for LS102XA powerpc: + MPC832XEMDS_HOST_66 +make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. +make: *** [sub-make] Error 2 10: ls1: config: Enable USB EHCI Host on LS1021AQDS powerpc: MPC832XEMDS_HOST_66 -make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. -make: *** [sub-make] Error 2 11: arm: ls102xa: Add snoop disable for slave port 0, 1 and 2 powerpc: + MPC832XEMDS_HOST_66 +make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. +make: *** [sub-make] Error 2 12: arm: ls102xa: Remove bit reversing for SCFG registers 13: ls102xa: ifc: nor: fix the write issue when bytes unaligned powerpc: MPC832XEMDS_HOST_66 -make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. -make: *** [sub-make] Error 2 14: arm: ls102xa: Add SystemID EEPROM support for LS1021ATWR board powerpc: + MPC832XEMDS_HOST_66 +make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. +make: *** [sub-make] Error 2 15: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing powerpc: MPC832XEMDS_HOST_66 -make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. -make: *** [sub-make] Error 2
You can see one error comes on and off. How can I debug it? I don't use python enough to diagnose the code. Is there a way to dump the make command to check?
York
Hi York,
Quoted 31 lines · York Sun
Simon,
Can you shed some light on my trouble? I am trying to use buildman for regression tests. I got inconsistency and am trying to find out why. Take one example
MPC832XEMDS_HOST_66in this case (I randomly pick a failed board)On one computer
$ ./tools/buildman/buildman -b working_upstream_qoriq --force-build --force-reconfig MPC832XEMDS_HOST_66 -ve No section: 'make-flags' winegcc: gcc-4.5 failed boards.cfg is up to date. Nothing to do. Building 15 commits for 1 boards (1 thread, 4 jobs per thread) 01: ARM: atmel: add sama5d4 xplained ultra board support 02: qe: add u-qe support to arm board 03: qe: add qe support to ls1021aqds 04: qe: add qe support for ls1021a-twr board 05: arm: ls102xa: Fixed a register definition error 06: u_qe: add u_qe_upload_firmware for u_qe 07: powerpc: Move fsl_errata.h out of arch/powerpc 08: driver/usb/fsl: Make FSL USB driver common 09: drivers: usb: fsl: Define USB configs for LS102XA 10: ls1: config: Enable USB EHCI Host on LS1021AQDS 11: arm: ls102xa: Add snoop disable for slave port 0, 1 and 2 12: arm: ls102xa: Remove bit reversing for SCFG registers 13: ls102xa: ifc: nor: fix the write issue when bytes unaligned 14: arm: ls102xa: Add SystemID EEPROM support for LS1021ATWR board 15: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing 15 0 0 /15 MPC832XEMDS_HOST_66
Quoted 6 lines
No error.
On another computer
$ ./tools/buildman/buildman -b working_upstream_qoriq --force-build --force-reconfig MPC832XEMDS_HOST_66 -se
-s means it won't actually build, just report a previous build. But I suppose you did a previous build.
Quoted 58 lines
No section: 'make-flags'
boards.cfg is up to date. Nothing to do.
Summary of 15 commits for 1 boards (1 thread, 24 jobs per thread) 01: ARM: atmel: add sama5d4 xplained ultra board support
powerpc: +MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target../arch//cpu/u-boot.lds', needed byu-boot.lds'. Stop.
+make: *** [sub-make] Error 2
02: qe: add u-qe support to arm board
powerpc:MPC832XEMDS_HOST_66
-make[1]: *** No rule to make target../arch//cpu/u-boot.lds', needed byu-boot.lds'. Stop.
-make: *** [sub-make] Error 2
03: qe: add qe support to ls1021aqds
powerpc: +MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target../arch//cpu/u-boot.lds', needed byu-boot.lds'. Stop.
+make: *** [sub-make] Error 2
04: qe: add qe support for ls1021a-twr board
05: arm: ls102xa: Fixed a register definition error
powerpc:MPC832XEMDS_HOST_66
-make[1]: *** No rule to make target../arch//cpu/u-boot.lds', needed byu-boot.lds'. Stop.
-make: *** [sub-make] Error 2
06:u_qe: addu_qe_upload_firmwareforu_qe
powerpc: +MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target../arch//cpu/u-boot.lds', needed byu-boot.lds'. Stop.
+make: *** [sub-make] Error 2
07: powerpc: Movefsl_errata.hout ofarch/powerpc
08: driver/usb/fsl: Make FSL USB driver common
powerpc:MPC832XEMDS_HOST_66
-make[1]: *** No rule to make target../arch//cpu/u-boot.lds', needed byu-boot.lds'. Stop.
-make: *** [sub-make] Error 2
09: drivers: usb: fsl: Define USB configs for LS102XA
powerpc: +MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target../arch//cpu/u-boot.lds', needed byu-boot.lds'. Stop.
+make: *** [sub-make] Error 2
10: ls1: config: Enable USB EHCI Host on LS1021AQDS
powerpc:MPC832XEMDS_HOST_66
-make[1]: *** No rule to make target../arch//cpu/u-boot.lds', needed byu-boot.lds'. Stop.
-make: *** [sub-make] Error 2
11: arm: ls102xa: Add snoop disable for slave port 0, 1 and 2
powerpc: +MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target../arch//cpu/u-boot.lds', needed byu-boot.lds'. Stop.
+make: *** [sub-make] Error 2
12: arm: ls102xa: Remove bit reversing for SCFG registers
13: ls102xa: ifc: nor: fix the write issue when bytes unaligned
powerpc:MPC832XEMDS_HOST_66
-make[1]: *** No rule to make target../arch//cpu/u-boot.lds', needed byu-boot.lds'. Stop.
-make: *** [sub-make] Error 2
14: arm: ls102xa: Add SystemID EEPROM support for LS1021ATWR board
powerpc: +MPC832XEMDS_HOST_66
Quoted 8 lines
+make[1]: *** No rule to make target
../arch//cpu/u-boot.lds', needed byu-boot.lds'. Stop.
+make: *** [sub-make] Error 2
15: arm: ls102xa: Selectge2_clk125for eTSEC clock muxing
powerpc:MPC832XEMDS_HOST_66
-make[1]: *** No rule to make target../arch//cpu/u-boot.lds', needed byu-boot.lds'. Stop.
-make: *** [sub-make] Error 2
It seems to have failed to configure things - there is no $ARCH perhaps?
Quoted 5 lines
You can see one error comes on and off. How can I debug it? I don't use python enough to diagnose the code. Is there a way to dump the make command to check?
York
Any change you are missing a toolchain or it is broken?
See ../working_upstream_qoriq/01*/MPC832XEMDS_HOST_66/toolchain for possible clues.
You can only see the make output if you comment out this line in builderthread.py:
#args.append('-s')Then it will be in a file called 'log'. It would be nice to have an option for that...
Regards,
Simon
Quoted 36 lines · Simon Glass
Hi York,
Quoted 33 lines · York Sun
Simon,
Can you shed some light on my trouble? I am trying to use buildman for regression tests. I got inconsistency and am trying to find out why. Take one example
MPC832XEMDS_HOST_66in this case (I randomly pick a failed board)On one computer
$ ./tools/buildman/buildman -b working_upstream_qoriq --force-build --force-reconfig MPC832XEMDS_HOST_66 -ve No section: 'make-flags' winegcc: gcc-4.5 failed boards.cfg is up to date. Nothing to do. Building 15 commits for 1 boards (1 thread, 4 jobs per thread) 01: ARM: atmel: add sama5d4 xplained ultra board support 02: qe: add u-qe support to arm board 03: qe: add qe support to ls1021aqds 04: qe: add qe support for ls1021a-twr board 05: arm: ls102xa: Fixed a register definition error 06: u_qe: add u_qe_upload_firmware for u_qe 07: powerpc: Move fsl_errata.h out of arch/powerpc 08: driver/usb/fsl: Make FSL USB driver common 09: drivers: usb: fsl: Define USB configs for LS102XA 10: ls1: config: Enable USB EHCI Host on LS1021AQDS 11: arm: ls102xa: Add snoop disable for slave port 0, 1 and 2 12: arm: ls102xa: Remove bit reversing for SCFG registers 13: ls102xa: ifc: nor: fix the write issue when bytes unaligned 14: arm: ls102xa: Add SystemID EEPROM support for LS1021ATWR board 15: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing 15 0 0 /15 MPC832XEMDS_HOST_66No error.
Quoted 7 lines
Quoted 4 lines
On another computer
$ ./tools/buildman/buildman -b working_upstream_qoriq --force-build --force-reconfig MPC832XEMDS_HOST_66 -se-s means it won't actually build, just report a previous build. But I suppose you did a previous build.
Right. I posted the command to show summary by mistake. Here is the one to build it.
$ ./tools/buildman/buildman -b working_upstream_qoriq --force-build
--force-reconfig MPC832XEMDS_HOST_66 -ve
No section: 'make-flags'
boards.cfg is up to date. Nothing to do.
Building 15 commits for 1 boards (1 thread, 24 jobs per thread)
Cloning repo for thread 0
01: ARM: atmel: add sama5d4 xplained ultra board support
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
02: qe: add u-qe support to arm board
03: qe: add qe support to ls1021aqds
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
04: qe: add qe support for ls1021a-twr board
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
05: arm: ls102xa: Fixed a register definition error
06: u_qe: add u_qe_upload_firmware for u_qe
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
07: powerpc: Move fsl_errata.h out of arch/powerpc
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
08: driver/usb/fsl: Make FSL USB driver common
09: drivers: usb: fsl: Define USB configs for LS102XA
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
10: ls1: config: Enable USB EHCI Host on LS1021AQDS
11: arm: ls102xa: Add snoop disable for slave port 0, 1 and 2
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
12: arm: ls102xa: Remove bit reversing for SCFG registers
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
13: ls102xa: ifc: nor: fix the write issue when bytes unaligned
14: arm: ls102xa: Add SystemID EEPROM support for LS1021ATWR board
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
15: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing
6 0 9 /15 MPC832XEMDS_HOST_66Quoted 3 lines
It seems to have failed to configure things - there is no $ARCH perhaps?
When I built for more targets, for example 'arm & freescale' powerpc aarch64, I see this kind of errors, but not with all boards. The ARCH is not defined in command line or environment when calling buildman. Beside, this error comes and goes for the same board for different commit. It doesn't make much sense.
Quoted 11 lines
Quoted 5 lines
You can see one error comes on and off. How can I debug it? I don't use python enough to diagnose the code. Is there a way to dump the make command to check?
York
Any change you are missing a toolchain or it is broken?
See ../working_upstream_qoriq/01*/MPC832XEMDS_HOST_66/toolchain for possible clues.
The toolchain is OK. I use the same setup to build other targets. Not all have this error. Using the same toolchain, I have no error calling MAKEALL.
Quoted 8 lines
You can only see the make output if you comment out this line in
builderthread.py:#args.append('-s')Then it will be in a file called 'log'. It would be nice to have an option for that...
Let me try that.
York
Quoted 4 lines · York Sun
Quoted 3 lines · Simon Glass
You can only see the make output if you comment out this line in
builderthread.py:
Quoted 8 lines
Quoted 5 lines
#args.append('-s')Then it will be in a file called 'log'. It would be nice to have an option for that...
Let me try that.
I made the change to file tools/buildman/builderthread.py
- args.append('-s')
+# args.append('-s')
I run it again for one commit and with one board
$ ./tools/buildman/buildman -b working_upstream_qoriq --count=1 --keep-outputs
--force-build --force-reconfig MPC832XEMDS_HOST_66 -ve
No section: 'make-flags'
boards.cfg is up to date. Nothing to do.
Building 1 commit for 1 boards (1 thread, 24 jobs per thread)
Cloning repo for thread 0
01: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
0 0 1 /1 MPC832XEMDS_HOST_66$ ll ../working_upstream_qoriq/01_of_01_g3b33b926_arm--ls102xa--Select/MPC832XEMDS_HOST_66/ total 28 -rw-rw-r-- 1 jenkins jenkins 11588 Nov 20 13:28 autoconf.mk -rw-rw-r-- 1 jenkins jenkins 1 Nov 20 13:28 done -rw-rw-r-- 1 jenkins jenkins 168 Nov 20 13:28 err -rw-rw-r-- 1 jenkins jenkins 939 Nov 20 13:28 log -rw-rw-r-- 1 jenkins jenkins 276 Nov 20 13:28 toolchain
I don't see much useful information in file log
$ cat ../working_upstream_qoriq/01_of_01_g3b33b926_arm--ls102xa--Select/MPC832XEMDS_HOST_66/log
make[1]: Entering directory `/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build'
GEN ./Makefilescripts/kconfig/conf --silentoldconfig Kconfig
CHK include/config.h UPD include/config.h GEN include/autoconf.mk GEN include/autoconf.mk.dep
make[1]: Leaving directory /local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build' make[1]: Entering directory /local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build'
CHK include/config/uboot.release CHK include/generated/timestamp_autogenerated.h GEN ./Makefile UPD include/generated/timestamp_autogenerated.h UPD include/config/uboot.release
make[1]: Leaving directory `/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build'
Nothing more than that. Where shall I look for ARCH?
If I build for board T4240QDS, it has error on most but not all. T4240QDS T4240QDS_SRIO_PCIE_BOOT T4240QDS_SECURE_BOOT failed, but T4240QDS_NAND didn't.
York
Hi York,
Quoted 65 lines · York Sun
Quoted 4 lines · York Sun
Quoted 3 lines · Simon Glass
You can only see the make output if you comment out this line in
builderthread.py:Quoted 8 lines
Quoted 5 lines
#args.append('-s')Then it will be in a file called 'log'. It would be nice to have an option for that...
Let me try that.
I made the change to file
tools/buildman/builderthread.py(quoted diff) +1
-1- args.append('-s') +# args.append('-s')I run it again for one commit and with one board
$ ./tools/buildman/buildman -b working_upstream_qoriq --count=1 --keep-outputs --force-build --force-reconfig MPC832XEMDS_HOST_66 -ve No section: 'make-flags' boards.cfg is up to date. Nothing to do. Building 1 commit for 1 boards (1 thread, 24 jobs per thread) Cloning repo for thread 0 01: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing powerpc: + MPC832XEMDS_HOST_66 +make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. +make: *** [sub-make] Error 2 0 0 1 /1 MPC832XEMDS_HOST_66$ ll ../working_upstream_qoriq/01_of_01_g3b33b926_arm--ls102xa--Select/MPC832XEMDS_HOST_66/ total 28(quoted diff) +0
-5-rw-rw-r-- 1 jenkins jenkins 11588 Nov 20 13:28 autoconf.mk -rw-rw-r-- 1 jenkins jenkins 1 Nov 20 13:28 done -rw-rw-r-- 1 jenkins jenkins 168 Nov 20 13:28 err -rw-rw-r-- 1 jenkins jenkins 939 Nov 20 13:28 log -rw-rw-r-- 1 jenkins jenkins 276 Nov 20 13:28 toolchainI don't see much useful information in file log
$ cat ../working_upstream_qoriq/01_of_01_g3b33b926_arm--ls102xa--Select/MPC832XEMDS_HOST_66/logmake[1]: Entering directory `/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build'
GEN ./Makefilescripts/kconfig/conf--silentoldconfigKconfigCHK include/config.h UPD include/config.h GEN include/autoconf.mk GEN include/autoconf.mk.depmake[1]: Leaving directory
/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build' make[1]: Entering directory/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build'CHK include/config/uboot.release CHK include/generated/timestamp_autogenerated.h GEN ./Makefile UPD include/generated/timestamp_autogenerated.h UPD include/config/uboot.release
Quoted 4 lines
make[1]: Leaving directory `/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build'
Nothing more than that. Where shall I look for ARCH?
That doesn't look like a full build to me. The 'err' file may have more clues. You could try without '--force-build --force-reconfig' perhaps.
Quoted 3 lines
If I build for board T4240QDS, it has error on most but not all. T4240QDS
T4240QDS_SRIO_PCIE_BOOTT4240QDS_SECURE_BOOTfailed, butT4240QDS_NANDdidn't.
It's a bit of a mystery. How about adding V=1 in your make flags in ~/.buildman:
[make-flags]
T4240QDS=V=1
Regards,
Simon
Quoted 7 lines · Simon Glass
Quoted 2 lines
Nothing more than that. Where shall I look for ARCH?
That doesn't look like a full build to me. The 'err' file may have more clues. You could try without '--force-build --force-reconfig' perhaps.
No, it failed. The err file has this
$ cat err make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. make[1]: *** Waiting for unfinished jobs.... make: *** [sub-make] Error 2
Quoted 6 lines
Quoted 3 lines
If I build for board T4240QDS, it has error on most but not all. T4240QDS
T4240QDS_SRIO_PCIE_BOOTT4240QDS_SECURE_BOOTfailed, butT4240QDS_NANDdidn't.It's a bit of a mystery. How about adding V=1 in your make flags in ~/.buildman:
I think the key is to configure it, not build it. With the failure case, it doesn't build. I am thinking to find the equivalent to "make ARCH=power ...". How to dump that?
York
Hi York,
Quoted 22 lines · York Sun
Quoted 7 lines · Simon Glass
Quoted 2 lines
Nothing more than that. Where shall I look for ARCH?
That doesn't look like a full build to me. The 'err' file may have more clues. You could try without '--force-build --force-reconfig' perhaps.
No, it failed. The err file has this
$ cat err make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. make[1]: *** Waiting for unfinished jobs.... make: *** [sub-make] Error 2Quoted 4 lines
Quoted 3 lines
If I build for board T4240QDS, it has error on most but not all. T4240QDS
T4240QDS_SRIO_PCIE_BOOTT4240QDS_SECURE_BOOTfailed, butT4240QDS_NANDdidn't.
Quoted 6 lines
Quoted 2 lines
It's a bit of a mystery. How about adding V=1 in your make flags in ~/.buildman:
I think the key is to configure it, not build it. With the failure case, it doesn't build. I am thinking to find the equivalent to "make ARCH=power ...". How to dump that?
Add a 'print' line to make() in builder.py:
cmd = [self.gnu_make] + list(args)
print cmd
result = command.RunPipe([cmd], capture=True, capture_stderr=True,
cwd=cwd, raise_on_error=False, **kwargs)
return result
Regards,
Simon
Quoted 6 lines · Simon Glass
Hi York,
Quoted 4 lines
I think the key is to configure it, not build it. With the failure case, it doesn't build. I am thinking to find the equivalent to "make ARCH=power ...". How to dump that?
Quoted 8 lines
Add a 'print' line to
make()inbuilder.py:cmd = [self.gnu_make] + list(args)
print cmd
result = command.RunPipe([cmd], capture=True, capture_stderr=True,
cwd=cwd, raise_on_error=False, **kwargs)
return result
Thanks. Adding the "print cmd" makes the issue disappeared. Removing it, the issue comes back. Add it back, it is gone again. I removed the working directory each time before building it. See the commands below
$ !407
./tools/buildman/buildman -b working_upstream_qoriq --count=1 --keep-outputs
--force-build --force-reconfig MPC832XEMDS_HOST_66 -ve
No section: 'make-flags'
boards.cfg is up to date. Nothing to do.
Building 1 commit for 1 boards (1 thread, 24 jobs per thread)
Cloning repo for thread 0
0 0 0 /1 (starting) ['make', 'mrproper', 'O=build', '-j', '24']
['make', 'O=build', '-j', '24', 'MPC832XEMDS_HOST_66_defconfig']
['make', 'O=build', '-j', '24']
01: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing
1 0 0 /1 MPC832XEMDS_HOST_66
-bash-3.2$ git difftools/buildman/builder.py +1 -0
@@ -324,6 +324,7 @@ class Builder: kwargs: Arguments to pass to command.RunPipe() """ cmd = [self.gnu_make] + list(args) + print cmd result = command.RunPipe([cmd], capture=True, capture_stderr=True, cwd=cwd, raise_on_error=False, **kwargs) return result
tools/buildman/builderthread.py +1 -1
@@ -197,7 +197,7 @@ class BuilderThread(threading.Thread): src_dir = os.getcwd() else: args.append('O=build') - args.append('-s') +# args.append('-s') if self.builder.num_jobs is not None: args.extend(['-j', str(self.builder.num_jobs)]) config_args = ['%s_defconfig' % brd.target]
-bash-3.2$ git checkout tools/buildman/builder.py
-bash-3.2$ rm -rf ../working_upstream_qoriq/
-bash-3.2$ ./tools/buildman/buildman -b working_upstream_qoriq --count=1 --keep-outputs --force-build --force-reconfig MPC832XEMDS_HOST_66 -ve No section: 'make-flags'
boards.cfg is up to date. Nothing to do.
Building 1 commit for 1 boards (1 thread, 24 jobs per thread) Cloning repo for thread 0
01: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target ../arch//cpu/u-boot.lds', needed by u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
0 0 1 /1 MPC832XEMDS_HOST_66
-bash-3.2$ vi tools/buildman/builder.py
-bash-3.2$ rm -rf ../working_upstream_qoriq/-bash-3.2$ ./tools/buildman/buildman -b working_upstream_qoriq --count=1 --keep-outputs --force-build --force-reconfig MPC832XEMDS_HOST_66 -ve
No section: 'make-flags'
boards.cfg is up to date. Nothing to do.
Building 1 commit for 1 boards (1 thread, 24 jobs per thread) Cloning repo for thread 0
0 0 0 /1 (starting) ['make', 'mrproper', 'O=build', '-j', '24']
['make', 'O=build', '-j', '24', 'MPC832XEMDS_HOST_66_defconfig']
['make', 'O=build', '-j', '24']
01: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing
1 0 0 /1 MPC832XEMDS_HOST_66-bash-3.2$
I don't see ARCH defined anywhere.
York
Quoted 3 lines · York Sun
I don't see ARCH defined anywhere.
Simon,
I think ARCH is defined in Kconfig as SYS_ARCH. Is it possible buildman runs out-of-order?
York
Quoted 10 lines · York Sun
Quoted 3 lines · York Sun
I don't see ARCH defined anywhere.
Simon,
I think ARCH is defined in
KconfigasSYS_ARCH. Is it possible buildman runs out-of-order?
There is something. When the server is under heavy load, this error doesn't show. When the server is mostly idling, the error comes. Any suggestion to debug it?
York
Quoted 6 lines · York Sun
Quoted 5 lines · York Sun
Quoted 3 lines · York Sun
I don't see ARCH defined anywhere.
Quoted 8 lines
Quoted 5 lines
Simon,
I think ARCH is defined in
KconfigasSYS_ARCH. Is it possible buildman runs out-of-order?There is something. When the server is under heavy load, this error doesn't show. When the server is mostly idling, the error comes. Any suggestion to debug it?
Scratch that. It is not consistent.
York
Hi York,
Quoted 9 lines · York Sun
Quoted 8 lines · York Sun
Quoted 7 lines · York Sun
Quoted 3 lines · York Sun
I don't see ARCH defined anywhere.
Simon,
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
I think ARCH is defined in
KconfigasSYS_ARCH. Is it possible buildman runs out-of-order?There is something. When the server is under heavy load, this error doesn't show. When the server is mostly idling, the error comes. Any suggestion to debug it?
Scratch that. It is not consistent.
It's a mystery to me. I haven't seen this problem in much usage and can only suggest digging in to figure it out.
Regards,
Simon
Quoted 16 lines · Simon Glass
Hi York,
Quoted 13 lines · York Sun
Quoted 12 lines · York Sun
Quoted 10 lines · York Sun
Quoted 3 lines · York Sun
I don't see ARCH defined anywhere.
Simon,
I think ARCH is defined in
KconfigasSYS_ARCH. Is it possible buildman runs out-of-order?
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
There is something. When the server is under heavy load, this error doesn't show. When the server is mostly idling, the error comes. Any suggestion to debug it?
Scratch that. It is not consistent.
It's a mystery to me. I haven't seen this problem in much usage and can only suggest digging in to figure it out.
Found something but not the root cause yet. For the failure run, it runs in Makefile, passed include/config/uboot.release, but not anything under "prepare3:". For the success run, it continues to run.
-bash-3.2$ more log
make[1]: Entering directory `/local/jenkins/jobs/york-scm-test-upstream-before-requesting- pull/working_upstream_qoriq/.bm-work/00/build'
GEN ./Makefilescripts/kconfig/conf --silentoldconfig Kconfig
CHK include/config.h UPD include/config.h GEN include/autoconf.mk GEN include/autoconf.mk.dep
make[1]: Leaving directory /local/jenkins/jobs/york-scm-test-upstream-before-requesting-p ull/working_upstream_qoriq/.bm-work/00/build' make[1]: Entering directory /local/jenkins/jobs/york-scm-test-upstream-before-requesting- pull/working_upstream_qoriq/.bm-work/00/build'
echo "York debug here"
York debug here
CHK include/config/uboot.release CHK include/generated/timestamp_autogenerated.h GEN ./Makefile UPD include/generated/timestamp_autogenerated.h UPD include/config/uboot.release
echo "Done uboot.release"
Done uboot.release
(note, for the success run, the log would have "Using .. as source for U-Boot" here)
make[1]: Leaving directory `/local/jenkins/jobs/york-scm-test-upstream-before-requesting-p ull/working_upstream_qoriq/.bm-work/00/build'
Not sure if this is still buildman related, but only visible when running with buildman.
York
Quoted 2 lines · York Sun
Not sure if this is still buildman related, but only visible when running with buildman.
Simon,
It seems related to out-of-tree building.
For the failure case, the dependency "include/config/uboot.release" completes but not continue to run. It seems to be related to out of tree building. When I use buildman, it use out-of-tree building by default. I can reproduce the issue by using make directly with O=<path>. I don't understand how out-of-tree building would inconsistently fail.
-bash-3.2$ CROSS_COMPILE=/opt/fsl-networking/QorIQ-SDK-V1.4/sysroots/x86_64-fsl_networking_sdk-linux/usr/bin/ppce500mc-fsl_networking-linux/powerpc-fsl_networking-linux- make -j24 O=../working_upstream_qoriq/ mrproper MPC832XEMDS_HOST_66_defconfig all
make[1]: Entering directory
`/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq'
CLEAN tools CLEAN tools/lib tools/common CLEAN scripts/basic CLEAN scripts/kconfig CLEAN u-boot.lds CLEAN include/config include/generated CLEAN .config include/autoconf.mk include/autoconf.mk.dep include/config.h HOSTCC scripts/basic/fixdep GEN ./Makefile HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/workspace/scripts/kconfig/menu.c:
In function ?get_symbol_str?:
/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/workspace/scripts/kconfig/menu.c:551:
warning: ?jump? may be used uninitialized in this function
HOSTLD scripts/kconfig/conf
#
# configuration written to .config # GEN ./Makefile scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config.h UPD include/config.h GEN include/autoconf.mk GEN include/autoconf.mk.dep CHK include/config/uboot.release GEN ./Makefile CHK include/generated/timestamp_autogenerated.h make[2]: *** No rule to make target `/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/workspace/arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. make[2]: *** Waiting for unfinished jobs.... UPD include/generated/timestamp_autogenerated.h UPD include/config/uboot.release make[1]: *** [__build_one_by_one] Error 2 make[1]: Leaving directory `/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq' make: *** [sub-make] Error 2
For the passed case, the log is
-bash-3.2$ CROSS_COMPILE=/opt/fsl-networking/QorIQ-SDK-V1.4/sysroots/x86_64-fsl_networking_sdk-linux/usr/bin/ppce500mc-fsl_networking-linux/powerpc-fsl_networking-linux- make -j24 O=../working_upstream_qoriq/ mrproper MPC832XEMDS_HOST_66_defconfig all
make[1]: Entering directory
`/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq'
CLEAN scripts/basic CLEAN scripts/kconfig CLEAN include/config include/generated CLEAN .config include/autoconf.mk include/autoconf.mk.dep include/config.h HOSTCC scripts/basic/fixdep GEN ./Makefile HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/workspace/scripts/kconfig/menu.c:
In function ?get_symbol_str?:
/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/workspace/scripts/kconfig/menu.c:551:
warning: ?jump? may be used uninitialized in this function
HOSTLD scripts/kconfig/conf
#
# configuration written to .config # GEN ./Makefile scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config.h UPD include/config.h GEN include/autoconf.mk GEN include/autoconf.mk.dep CHK include/config/uboot.release CHK include/generated/timestamp_autogenerated.h GEN ./Makefile UPD include/generated/timestamp_autogenerated.h UPD include/config/uboot.release Using /local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/workspace as source for U-Boot CHK include/generated/version_autogenerated.h UPD include/generated/version_autogenerated.h CC lib/asm-offsets.s GEN include/generated/generic-asm-offsets.h LDS u-boot.lds HOSTCC tools/envcrc.o WRAP tools/lib/crc32.c WRAP tools/common/env_embedded.c WRAP tools/lib/sha1.c HOSTCC tools/gen_eth_addr HOSTCC tools/img2srec HOSTCC tools/mkenvimage.o HOSTCC tools/os_support.o (and keep going)
York
+Masahiro who may have some ideas
Hi York,
Quoted 110 lines · York Sun
Quoted 2 lines · York Sun
Not sure if this is still buildman related, but only visible when running with buildman.
Simon,
It seems related to out-of-tree building.
For the failure case, the dependency "
include/config/uboot.release" completes but not continue to run. It seems to be related to out of tree building. When I use buildman, it use out-of-tree building by default. I can reproduce the issue by using make directly with O=<path>. I don't understand how out-of-tree building would inconsistently fail.-bash-3.2$ CROSS_COMPILE=/opt/fsl-networking/QorIQ-SDK-V1.4/sysroots/x86_64-fsl_networking_sdk-linux/usr/bin/ppce500mc-fsl_networking-linux/powerpc-fsl_networking-linux- make -j24 O=../working_upstream_qoriq/ mrproper
MPC832XEMDS_HOST_66_defconfigall
make[1]: Entering directory
`/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq'CLEAN tools CLEAN tools/lib tools/common CLEAN scripts/basic CLEAN scripts/kconfig CLEAN u-boot.lds CLEAN include/config include/generated CLEAN .config include/autoconf.mk include/autoconf.mk.dep include/config.h HOSTCC scripts/basic/fixdep GEN ./Makefile HOSTCC scripts/kconfig/conf.oSHIPPED
scripts/kconfig/zconf.tab.c
SHIPPEDscripts/kconfig/zconf.lex.c
SHIPPEDscripts/kconfig/zconf.hash.c
HOSTCCscripts/kconfig/zconf.tab.o
/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/workspace/scripts/kconfig/menu.c:
In function ?get_symbol_str?:
/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/workspace/scripts/kconfig/menu.c:551:
warning: ?jump? may be used uninitialized in this function
HOSTLDscripts/kconfig/conf
## configuration written to .config # GEN ./Makefile scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config.h UPD include/config.h GEN include/autoconf.mk GEN include/autoconf.mk.dep CHK include/config/uboot.release GEN ./Makefile CHK include/generated/timestamp_autogenerated.h make[2]: *** No rule to make target `/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/workspace/arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. make[2]: *** Waiting for unfinished jobs.... UPD include/generated/timestamp_autogenerated.h UPD include/config/uboot.release make[1]: *** [__build_one_by_one] Error 2 make[1]: Leaving directory `/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq' make: *** [sub-make] Error 2For the passed case, the log is
-bash-3.2$ CROSS_COMPILE=/opt/fsl-networking/QorIQ-SDK-V1.4/sysroots/x86_64-fsl_networking_sdk-linux/usr/bin/ppce500mc-fsl_networking-linux/powerpc-fsl_networking-linux- make -j24 O=../working_upstream_qoriq/ mrproper
MPC832XEMDS_HOST_66_defconfigall
make[1]: Entering directory
`/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq'CLEAN scripts/basic CLEAN scripts/kconfig CLEAN include/config include/generated CLEAN .config include/autoconf.mk include/autoconf.mk.dep include/config.h HOSTCC scripts/basic/fixdep GEN ./Makefile HOSTCC scripts/kconfig/conf.oSHIPPED
scripts/kconfig/zconf.tab.c
SHIPPEDscripts/kconfig/zconf.lex.c
SHIPPEDscripts/kconfig/zconf.hash.c
HOSTCCscripts/kconfig/zconf.tab.o
/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/workspace/scripts/kconfig/menu.c:
In function ?get_symbol_str?:
/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/workspace/scripts/kconfig/menu.c:551:
warning: ?jump? may be used uninitialized in this function
HOSTLDscripts/kconfig/conf
## configuration written to .config # GEN ./Makefile scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config.h UPD include/config.h GEN include/autoconf.mk GEN include/autoconf.mk.dep CHK include/config/uboot.release CHK include/generated/timestamp_autogenerated.h GEN ./Makefile UPD include/generated/timestamp_autogenerated.h UPD include/config/uboot.release Using /local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/workspace as source for U-Boot CHK include/generated/version_autogenerated.h UPD include/generated/version_autogenerated.h CC lib/asm-offsets.s GEN include/generated/generic-asm-offsets.h LDS u-boot.lds HOSTCC tools/envcrc.o
Quoted 8 lines
WRAP tools/lib/crc32.c WRAP tools/common/env_embedded.c WRAP tools/lib/sha1.c HOSTCC tools/gen_eth_addr HOSTCC tools/img2srec HOSTCC tools/mkenvimage.o HOSTCC tools/os_support.o (and keep going)
This may be unrelated to buildman, but to check you can use the -i flag to enable an in-tree build.
Regards,
Simon
Hi York, Simon,
Quoted 23 lines · On Fri, 21 Nov 2014 05:14:02 +0100 Simon Glass <[email protected]> wrote:
+Masahiro who may have some ideas
Hi York,
Quoted 18 lines · York Sun
Quoted 2 lines · York Sun
Not sure if this is still buildman related, but only visible when running with buildman.
Simon,
It seems related to out-of-tree building.
For the failure case, the dependency "
include/config/uboot.release" completes but not continue to run. It seems to be related to out of tree building. When I use buildman, it use out-of-tree building by default. I can reproduce the issue by using make directly with O=<path>. I don't understand how out-of-tree building would inconsistently fail.-bash-3.2$ CROSS_COMPILE=/opt/fsl-networking/QorIQ-SDK-V1.4/sysroots/x86_64-fsl_networking_sdk-linux/usr/bin/ppce500mc-fsl_networking-linux/powerpc-fsl_networking-linux- make -j24 O=../working_upstream_qoriq/ mrproper
MPC832XEMDS_HOST_66_defconfigall
Please do not run "mrproper" with "*_defconfig" and "all".
Doing "_defconfig" and "all" at one time is supported,
but you must "clean" or "mrproper" separately.
This is the upstream limitation. Linux Kernel does not support it either.
Without -j* option, "make mrproper *_defconfig all" works, of course, because they are run one by one in the given order.
With -j* option, it would not work because
the build system removes some files while it compiles other objects.
I guess this is the root cause of the inconsistent fails you have seen.
Best Regards
Masahiro Yamada
Hi York, Simon,
Quoted 31 lines · On Fri, 21 Nov 2014 13:42:05 +0900 Masahiro Yamada <[email protected]>…
Quoted 21 lines
Hi York,
Quoted 18 lines · York Sun
Quoted 2 lines · York Sun
Not sure if this is still buildman related, but only visible when running with buildman.
Simon,
It seems related to out-of-tree building.
For the failure case, the dependency "
include/config/uboot.release" completes but not continue to run. It seems to be related to out of tree building. When I use buildman, it use out-of-tree building by default. I can reproduce the issue by using make directly with O=<path>. I don't understand how out-of-tree building would inconsistently fail.-bash-3.2$ CROSS_COMPILE=/opt/fsl-networking/QorIQ-SDK-V1.4/sysroots/x86_64-fsl_networking_sdk-linux/usr/bin/ppce500mc-fsl_networking-linux/powerpc-fsl_networking-linux- make -j24 O=../working_upstream_qoriq/ mrproper
MPC832XEMDS_HOST_66_defconfigallPlease do not run "mrproper" with "
*_defconfig" and "all".Doing "
_defconfig" and "all" at one time is supported,
but you must "clean" or "mrproper" separately.
This is the upstream limitation. Linux Kernel does not support it either.
Quoted 7 lines
Without -j* option, "make mrproper
*_defconfigall" works, of course, because they are run one by one in the given order.With -j* option, it would not work because
the build system removes some files while it compiles other objects.I guess this is the root cause of the inconsistent fails you have seen.
Sorry, this was my misunderstanding.
"make mrproper *_defconfig all" works. Then, it is still a mystery...
Best Regards
Masahiro Yamada
Thanks for the hint. I should point out buildman does the three steps separately, and only apply -j to the last step. But I still see the failure.
York
________________________________
From: Masahiro Yamada
Sent: Thu, 20/11/2014 20:42
To: Sun York-R58495 <[email protected]>; Simon Glass <[email protected]>
CC: u-boot at lists.denx.de; Wolfgang Denk <[email protected]>
Subject: Re: [U-Boot] help on using buildman
Hi York, Simon,
Quoted 23 lines · On Fri, 21 Nov 2014 05:14:02 +0100 Simon Glass <[email protected]> wrote:
+Masahiro who may have some ideas
Hi York,
Quoted 18 lines · York Sun
Quoted 2 lines · York Sun
Not sure if this is still buildman related, but only visible when running with buildman.
Simon,
It seems related to out-of-tree building.
For the failure case, the dependency "
include/config/uboot.release" completes but not continue to run. It seems to be related to out of tree building. When I use buildman, it use out-of-tree building by default. I can reproduce the issue by using make directly with O=<path>. I don't understand how out-of-tree building would inconsistently fail.-bash-3.2$ CROSS_COMPILE=/opt/fsl-networking/QorIQ-SDK-V1.4/sysroots/x86_64-fsl_networking_sdk-linux/usr/bin/ppce500mc-fsl_networking-linux/powerpc-fsl_networking-linux- make -j24 O=../working_upstream_qoriq/ mrproper
MPC832XEMDS_HOST_66_defconfigall
Please do not run "mrproper" with "*_defconfig" and "all".
Doing "_defconfig" and "all" at one time is supported,
but you must "clean" or "mrproper" separately.
This is the upstream limitation. Linux Kernel does not support it either.
Without -j* option, "make mrproper *_defconfig all" works, of course, because they are run one by one in the given order.
With -j* option, it would not work because
the build system removes some files while it compiles other objects.
I guess this is the root cause of the inconsistent fails you have seen.
Best Regards
Masahiro Yamada
Hi York,
I have not been able to reproduce this issue on my box, but the cause surely resides on Kbuild itself. It is not related to buildman at all.
Quoted 6 lines
/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/workspace/scripts/kconfig/menu.c:
In function ?et_symbol_str? /local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/workspace/scripts/kconfig/menu.c:551:
warning: ?ump?may be used uninitialized in this function
HOSTLDscripts/kconfig/conf
#
Quoted 14 lines
# configuration written to .config # GEN ./Makefile scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config.h UPD include/config.h GEN include/autoconf.mk GEN include/autoconf.mk.dep CHK include/config/uboot.release GEN ./Makefile CHK include/generated/timestamp_autogenerated.h make[2]: *** No rule to make target `/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/workspace/arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop.
According to this fail log, "ARCH" has not been defined yet when LDSCRIPT is evaluated.
# If there is no specified link script, we look in a number of places for it ifndef LDSCRIPT
ifeq ($(wildcard $(LDSCRIPT)),) LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds endif ifeq ($(wildcard $(LDSCRIPT)),) LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds endif ifeq ($(wildcard $(LDSCRIPT)),) LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds endif
endif
I am not sure the real cause but it looks like the following code does not work on *some* situation.
autoconf_is_current := $(if $(wildcard $(KCONFIG_CONFIG)),$(shell find . \ -path ./include/config/auto.conf -newer $(KCONFIG_CONFIG)))
ifneq ($(autoconf_is_current),)
include $(srctree)/config.mk
endif
Now I have realized that it is the problem I am responsible to fix, but it might not be easy enough to change LDSCRIPT stuff.
So, my question is, how much time can you give me to fix it? Can you bare with it one month or so?
Best Regards
Masahiro Yamada
Masahiro,
Sorry for repeatly sending this email. My previous reply was rejected by the mailing list due to some weird base64 encoding.
I tend to agree with you since I could reproduce it using make.
I want to share some of my debug. There is a label in Makefile, prepare3. When it runs correctly, the code under that label runs after the dependency "include/config/uboot.release". I can inject some echo to see the progress. However, for the failed run (no change of code or command, just repeatedly run), nothing runs after the dependency " include/config/uboot.release". The host is Ubuntu 12.04 x86_64. I am not sure if the inconsistency is cause by Kbuild.
York
Quoted 8 lines · York Sun
Masahiro,
Sorry for repeatly sending this email. My previous reply was rejected by the mailing list due to some weird base64 encoding.
I tend to agree with you since I could reproduce it using make.
I want to share some of my debug. There is a label inMakefile, prepare3. When it runs correctly, the code under that label runs after the dependency "include/config/uboot.release". I can inject some echo to see the progress. However, for the failed run (no change of code or command, just repeatedly run), nothing runs after the dependency "include/config/uboot.release". The host is Ubuntu 12.04x86_64. I am not sure if the inconsistency is cause byKbuild.
Sorry, I was mistaken about the host OS. It is CentOS 5.11, if that makes any difference.
York
Quoted 5 lines · Simon Glass
Quoted 1 line
(and keep going)
This may be unrelated to buildman, but to check you can use the -i flag to enable an in-tree build.
Thanks for the tip, but it didn't help. I repeatedly run 10 times. 3 out of 10 failed. FWIW, MAKEALL fails the same way. Is there anything funny about CentOS 5.11?
York