Skip to contentSkip to conversation

seeking further info on firmware-3

DISCUSSION Robert E. Cochran 2 participants 2 messages Nov 21, 2014 – Nov 22, 2014 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore
#0 lore raw

Hi,

I'm testing Linux 3.18-rc5 with a QCA9880 / Compex WLE900VX.

During boot, I'm seeing complaints about not finding firmware-3.bin:

ath10k_pci 0001:03:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-3.bin failed with error -2 ath10k_pci 0001:03:00.0: could not fetch firmware file 'ath10k/QCA988X/hw2.0/firmware-3.bin': -2

Can someone please confirm that we should be using firmware-3.bin_10.2-00082-4-2 from the 10.2 folder on https://github.com/kvalo/ath10k-firmware.git
? When we use this firmware, we see the following during boot:

ath10k_pci 0001:03:00.0: qca988x hw2.0 (0x4100016c, 0x043202ff) fw 10.2-00082-4-2 api 3 htt 2.1 ath10k_pci 0001:03:00.0: debug 1 debugfs 1 tracing 0 dfs 0 testmode 1

If this isn't the latest & greatest firmware, then where do I find firmware-3.bin?

And If I should be using firmware-3.bin_10.2-00082-4-2, then are there some release notes available for this?

Finally, please let me know if it's a mistake to be working with firmware-3 on the 3.18 kernel. We're performing some early integration testing with this WiFi module, and it's more important to get things working as an AP with hostapd than getting the latest cutting edge features working.

Thanks,

Bob

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#1 lore raw
Quoted 8 lines · Robert E. Cochran

I'm testing Linux 3.18-rc5 with a QCA9880 / Compex WLE900VX.

During boot, I'm seeing complaints about not finding firmware-3.bin:

ath10k_pci 0001:03:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-3.bin failed with error -2 ath10k_pci 0001:03:00.0: could not fetch firmware file ath10k/QCA988X/hw2.0/firmware-3.bin': -2

You can ignore this warning. ath10k is just telling (in a confusing way) that it could not find firmware-3.bin and will try firmware-2.bin next. We should clear up that warning message.

Quoted 8 lines

Can someone please confirm that we should be using firmware-3.bin_10.2-00082-4-2 from the 10.2 folder on
https://github.com/kvalo/ath10k-firmware.git
? When we use this firmware, we see the following during boot:

ath10k_pci 0001:03:00.0: qca988x hw2.0 (0x4100016c, 0x043202ff) fw 10.2-00082-4-2 api 3 htt 2.1
ath10k_pci 0001:03:00.0: debug 1 debugfs 1 tracing 0 dfs 0 testmode 1

That's good. Using firmware from 10.2 branch is a good idea. But did you rename it to firmware-2.bin? It should be called firmware-3.bin.

Quoted 2 lines

If this isn't the latest & greatest firmware, then where do I find firmware-3.bin?

ath10k-firmware.git is the correct location to find the firmware.

Quoted 2 lines

And If I should be using firmware-3.bin_10.2-00082-4-2, then are there some release notes available for this?

Unfortunately there are no firmware release notes available.

Quoted 5 lines

Finally, please let me know if it's a mistake to be working with
firmware-3 on the 3.18 kernel. We're performing some early
integration testing with this WiFi module, and it's more important to get things working as an AP with hostapd than getting the latest cutting edge features working.

The number three in "firmware-3.bin" is just an API number, just like the soname in shared libraries, to make it possible to have backwards compatibility with the firmware releases. Instead use version string like "10.2-00082-4-2" to identify between firmware releases.

And yes, using firmware version 10.2-00082-4-2 is the firmware version I recommend to use at the moment.

Signature · 6 lines
Kalle Valo

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k