thermal sensor numbering change intended ?
At a dedicated server (i3770) I'm realized today that the sensors # have been switched between 3.17.3 and .4.
With 4 I do have :
# tail -v /sys/devices/virtual/thermal/thermal_zone?/temp ==> /sys/devices/virtual/thermal/thermal_zone0/temp <== 64000
==> /sys/devices/virtual/thermal/thermal_zone1/temp <== 27800
==> /sys/devices/virtual/thermal/thermal_zone2/temp <== 29800
whereas with with 3.17.3 the highest temperature (about 60°) was shown at sensor 2.
Intended or a regression ?
Signature · 2 lines
Toralf pgp key: 0076 E94E
Quoted 10 lines · Toralf Förster
At a dedicated server (i3770) I'm realized today that the sensors # have been switched between 3.17.3 and .4.
With 4 I do have :
# tail -v /sys/devices/virtual/thermal/thermal_zone?/temp ==> /sys/devices/virtual/thermal/thermal_zone0/temp <== 64000==>
/sys/devices/virtual/thermal/thermal_zone1/temp<== 27800
Quoted 8 lines
==>
/sys/devices/virtual/thermal/thermal_zone2/temp<== 29800whereas with with 3.17.3 the highest temperature (about 60°) was shown at sensor 2.
Intended or a regression ?
Hhm,
booting now into the same hardened kernel version, but new revision-r1 (new grsec patch) reverts it again, now I do have:
# tail -v /sys/devices/virtual/thermal/thermal_zone?/temp ==> /sys/devices/virtual/thermal/thermal_zone0/temp <== 27800
==> /sys/devices/virtual/thermal/thermal_zone1/temp <== 29800
==> /sys/devices/virtual/thermal/thermal_zone2/temp <== 67000
Signature · 2 lines
Toralf pgp key: 0076 E94E