Skip to contentSkip to conversation

How to build for MicroZed board?

meta-xilinx-community Marco Tessore 1 participant 1 message Jan 13, 2015

lore
Share & tools
lore
#0 lore raw

Good Morning,
I am new to Yocto, but I need to create an embedded system on board MicroZed, based on processor Zynq from Xilinx.

From what I understand the support form my board is provided by layer xilinx-meta-community; from the README file associated with this layer I see that the mailing list of reference is this, with the constraint of using "[meta-xilinx-community]" as a subject prefix.

In doubt if this is the correct mailing list, I am also writing to [email protected].

If I'm writing to the correct mailing list, I would write of a problem:
I would like to generate the configuration core-image-minimal, with MACHINE ??= "microzed-zynq7", with the sources aligned to version "daisy".

I cloned repositories related to "poky", "meta-xilinx" and "meta-xilinx-community" with the following commands:
- git clone -b daisy git://git.yoctoproject.org/poky.git
- git clone -b daisy git://github.com/Xilinx/meta-xilinx
- git clone -b daisy git://git.yoctoproject.org/meta-xilinx-community
- git clone -b daisy git://github.com/openembedded/meta-oe

I then modified my file local.conf specifying parallelism and the variable MACHINE ??= "ZedBoard-zynq7"

I also changed the file bblayers.conf changing layers included as follows:
BBLAYERS ?= " \
/data/axel/YoctoMicroZed/poky/meta \
/data/axel/YoctoMicroZed/poky/meta-yocto \
/data/axel/YoctoMicroZed/poky/meta-yocto-bsp \
/data/axel/YoctoMicroZed/poky/meta-xilinx-community \
/data/axel/YoctoMicroZed/poky/meta-xilinx \
/data/axel/YoctoMicroZed/poky/meta-oe/meta-oe \
"

The problem is that running the command "bitbake core-image-minimal",
after the download phase and the execution of some tasks, the process stops with the following error:
Function failed: do_configure (log file is located at /data/axel/YoctoMicroZed/poky/build/tmp/work/microzed_zynq7-poky-linux-gnueabi/linux-xlnx/3.14-xilinx+git2b48a8aeea7367359f9eebe55c4a09a05227f32b-r0/temp/log.do_configure.11742)

Before going to analyze the nature of the error I'd like to know if the version of the various sources is updated - in the sense:
there are archives of sources, tested such that it is possible to successfully execute the build for this system? Or I have to refer to particular sources on git commit?

Thank you in advance for any suggestion
Kind regards
Marco Tessore