Uhhuh - Dazed and confused, but trying to continue :)
Salutem
This happened only on thaw from S4 aka hibernate.
What should be "strange power saving mode" these messages relate!?
[ 208.252986] Uhhuh. NMI received for unknown reason 3d on CPU 0. [ 208.252991] Do you have a strange power saving mode enabled? [ 208.252992] Dazed and confused, but trying to continue
3.18.3-200.fc21.x86_64
poma
Quoted 11 lines · poma
Salutem
This happened only on thaw from S4 aka hibernate.
What should be "strange power saving mode" these messages relate!?[ 208.252986] Uhhuh. NMI received for unknown reason 3d on CPU 0. [ 208.252991] Do you have a strange power saving mode enabled? [ 208.252992] Dazed and confused, but trying to continue3.18.3-200.fc21.x86_64
This looks to be an external unknown NMI (unless you can reproduce on something other than cpu0).
I would have to know what hardware you have and see the dmesg log after the resume from hibernate.
You can open a bz and assign it to me.
Just attach the dmesg log, lspci and lspci -t output to the bz.
Though this is most likely a pci device firmware problem. But I can try to narrow it down.
Cheers,
Don
Quoted 21 lines · Don Zickus
Quoted 11 lines · poma
Salutem
This happened only on thaw from S4 aka hibernate.
What should be "strange power saving mode" these messages relate!?[ 208.252986] Uhhuh. NMI received for unknown reason 3d on CPU 0. [ 208.252991] Do you have a strange power saving mode enabled? [ 208.252992] Dazed and confused, but trying to continue3.18.3-200.fc21.x86_64
This looks to be an external unknown NMI (unless you can reproduce on something other than cpu0).
I would have to know what hardware you have and see the dmesg log after the resume from hibernate.
You can open a bz and assign it to me.
Quoted 8 lines
Just attach the dmesg log, lspci and lspci -t output to the bz.
Though this is most likely a pci device firmware problem. But I can try to narrow it down.
Cheers,
Don
Thank you, in the meantime, I've found what causes non-maskable interrupt, [23]d on CPU 0, on resuming S4, on AMD Phenom(tm) II X4 955 Processor.
/etc/default/tlp
...
# Kernel NMI Watchdog
# 0=disable (default, saves power) / 1=enable (for kernel debugging only) NMI_WATCHDOG=0
Toggling to 1, messages no longer appear,
NMI_WATCHDOG=1
$ cat /proc/sys/kernel/nmi_watchdog 1 $ sysctl kernel.watchdog kernel.watchdog = 1
Isn't it brilliant.
Quoted 14 lines · poma
On 19.01.2015 14:49, Don Zickus wrote:
Thank you, in the meantime, I've found what causes non-maskable interrupt, [23]d on CPU 0, on resuming S4, on AMD Phenom(tm) II X4 955 Processor.
/etc/default/tlp
...
# Kernel NMI Watchdog
# 0=disable (default, saves power) / 1=enable (for kernel debugging only) NMI_WATCHDOG=0Toggling to 1, messages no longer appear,
NMI_WATCHDOG=1
Quoted 6 lines
$ cat /proc/sys/kernel/nmi_watchdog 1 $ sysctl kernel.watchdog kernel.watchdog = 1Isn't it brilliant.
Hehe. Ok. All that does is swallow your unknown NMI. But if that makes you happy, I am fine with that. :-)
Cheers,
Don
Quoted 20 lines · Don Zickus
Quoted 19 lines · poma
On 19.01.2015 14:49, Don Zickus wrote:
Thank you, in the meantime, I've found what causes non-maskable interrupt, [23]d on CPU 0, on resuming S4, on AMD Phenom(tm) II X4 955 Processor.
/etc/default/tlp
...
# Kernel NMI Watchdog
# 0=disable (default, saves power) / 1=enable (for kernel debugging only) NMI_WATCHDOG=0Toggling to 1, messages no longer appear,
NMI_WATCHDOG=1$ cat /proc/sys/kernel/nmi_watchdog 1 $ sysctl kernel.watchdog kernel.watchdog = 1
Quoted 9 lines
Quoted 1 line
Isn't it brilliant.
Hehe. Ok. All that does is swallow your unknown NMI. But if that makes you happy, I am fine with that. :-)
Cheers,
Don
I don't want to bother you for nothing, as long as nothing crashes, it can pass. Thanks again.