Skip to contentSkip to conversation

file name changes between reboots : /sys/class/hwmon/hwmon[0->1]/temp1_input

DISCUSSION Toralf Förster 2 participants 2 messages Jan 30, 2015 – Feb 2, 2015

lore
Share & tools
lore
#0 lore raw

I'm wondering where to blame a nagging issue with these file names :

t44 ~ # ls -l /sys/class/hwmon/hwmon?/temp?_input
-r--r--r-- 1 root root 4096 Jan 30 13:57 /sys/class/hwmon/hwmon1/temp1_input -r--r--r-- 1 root root 4096 Jan 30 13:57 /sys/class/hwmon/hwmon2/temp1_input -r--r--r-- 1 root root 4096 Jan 30 13:57 /sys/class/hwmon/hwmon2/temp2_input -r--r--r-- 1 root root 4096 Jan 30 13:57 /sys/class/hwmon/hwmon2/temp3_input

It appears sometimes after a reboot / new minor stable kernel that the first file name is found in hwmon0 instead of hwmon1. That's prevents me from adding that sensor file to the thinkfan.conf file b/c thinkfan refuses to start then.

This is a Lenove T440s with a a64 bit Gentoo Linux and 3.18.X-hardened kernel.

Signature · 2 lines
Toralf
pgp key: 7B1A 07F4 EC82 0F90 D4C2  8936 872A E508 0076 E94E
#1 lore raw
Quoted 9 lines · Toralf Förster

I'm wondering where to blame a nagging issue with these file names :

# ls -l /sys/class/hwmon/hwmon?/temp?_input
(quoted diff) +0 -4
-r--r--r-- 1 root root 4096 Jan 30 13:57 /sys/class/hwmon/hwmon1/temp1_input
-r--r--r-- 1 root root 4096 Jan 30 13:57 /sys/class/hwmon/hwmon2/temp1_input
-r--r--r-- 1 root root 4096 Jan 30 13:57 /sys/class/hwmon/hwmon2/temp2_input
-r--r--r-- 1 root root 4096 Jan 30 13:57 /sys/class/hwmon/hwmon2/temp3_input

It appears sometimes after a reboot / new minor stable kernel that the first file name is found in hwmon0 instead of hwmon1.

Those numbers get assigned in the order in which the drivers get attached, which is essentially random.

You have to use the permanent device path, which isn't as easy. Run something like this to find it:

find /sys -name 'temp*_input'

Regards,
Clemens