Skip to contentSkip to conversation

Kernel Panic in squashfs

BUG Tim Tassonis 2 participants 2 messages Feb 6, 2015

lore
Share & tools
lore
#0 lore raw

Hi all

Just found out that squashfs panics when compiled in statically instead of as a module, when mounting an sqf file. The sequence I did was:

# mkdir /mnt/gaia-ro
# mount /gaiarule.sqf  /mnt/gaia-ro -t squashfs -o loop

Maybe it is of importance that the sqf file is located in the initramfs. The kernel was panicking reliably with different sqf files, on different hardware upon the mount command, with "unable to handle kernel paging request". This was on 3.18.5. As soon as I compiled squashfs as a modules, the problem went away.

If you need further details, please cc me directly, as I unsubscribed from the list due to not being able to handle the massive load.

Bye
Tim

#1 lore raw
Quoted 11 lines · Tim Tassonis

Hi all

Just found out that squashfs panics when compiled in statically instead of as a module, when mounting an sqf file. The sequence I did was:

# mkdir /mnt/gaia-ro
# mount /gaiarule.sqf  /mnt/gaia-ro -t squashfs -o loop
Quoted 8 lines

Maybe it is of importance that the sqf file is located in the initramfs. The kernel was panicking reliably with different sqf files, on different hardware upon the mount command, with "unable to handle kernel paging request". This was on 3.18.5. As soon as I compiled squashfs as a modules, the problem went away.

If you need further details, please cc me directly, as I unsubscribed from the list due to not being able to handle the massive load.

What about sharing the actual kernel panic? :-)

Signature · 2 lines
Thanks,
//richard