BCM43362, sdio module sn8000

Dear all,

was trying to have working a wifi module, sn8000 from muRata, with a bcm43362 from a imx6q.

I have actually a 3.10 kernel, patched with same patch done on 3.14 for bcm43362, but i have no responses from the sdio module.

Seems sdio probing exits for timeout (110).

Module is correctly powered, and set to sdio 4 wires module. I am also using devicetree, uhsdc controller is enabled and should be set up correctly.

Every suggestion is appreciated,

Regards
Angelo