Please pull u-boot-imx
Hi Tom,
please pull from u-boot-imx, thanks !
The following changes since commit 1606b34aa50804227806971dbb6b82ea0bf81f55:
Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq
(2015-02-25 18:14:18 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 32df39c741788e8637cffe6633d73594b26d70fb:
mx5: fix get_reset_cause (2015-03-05 10:29:27 +0100)
----------------------------------------------------------------
Christian Gmeiner (2):
cmd_eeprom: make it possible to define the used i2c bus
ot1200: add eeprom command to non-SPL build
Eric Nelson (2):
ARM: i.MX: provide access to reset cause through get_imx_reset_cause()
nitrogen6x: set environment variable reset_cause
Fabio Estevam (9):
mc34704: Add the definition of ONOFFA bit
mx25pdk: Turn on the LCD supply
mx31: Fix boot hang by avoiding vector relocation
mx35: Fix boot hang by avoiding vector relocation
mx6sabre: Enable User Mass Storage
mx6sabre: Select CMD_EXT4 options
mx6slevk: Provide a proper pad configuration for OTG1_ID pin
warp: Add USB Mass Storage support
warp: Select BOUNCE_BUFFER and CMD_EXT options
Otavio Salvador (4):
mmc: fsl_esdhc: Add CMD11 support to switch to 1.8V
mmc: fsl_esdhc: Add support to force VSELECT set
imx: mx6sl: Extend USDHC SD2 pins to support 8-wire use
warp: Add initial WaRP Board support
Peng Fan (7):
pmic:pfuze implement pmic_mode_init imx:mx6 set normal APS and standby PFM mode
ARM: imx6: disable bandgap self-bias after boot
ARM: imx6 Add WDOG3 for i.MX6SX imx:mx6sl add I2c pad settings imx:mx6slevk add pmic and i2c configuration imx:mx6slevk implement power init board
Raul Cardenas (1):
imx6: Added DEK blob generator command
Soeren Moch (2):
board: tbs2910: Gate clock when switching async clock muxes
board: tbs2910: Enable USB Mass Storage support
Stefano Babic (4):
pmic: fix missing SWITCH_SIZE
Merge branch 'master' of git://git.denx.de/u-boot
Merge branch 'master' of git://git.denx.de/u-boot
mx5: fix get_reset_cause
README | 3 ++ arch/arm/Kconfig | 5 ++ arch/arm/cpu/arm1136/mx31/Makefile | 4 ++ arch/arm/cpu/arm1136/mx31/relocate.S | 23 ++++++++ arch/arm/cpu/arm1136/mx35/Makefile | 4 ++ arch/arm/cpu/arm1136/mx35/relocate.S | 23 ++++++++ arch/arm/cpu/armv7/mx6/soc.c | 29 ++++++++++ arch/arm/imx-common/Makefile | 1 + arch/arm/imx-common/cmd_dek.c | 91 +++++++++++++++++++++++++++++++ arch/arm/imx-common/cpu.c | 10 +++- arch/arm/imx-common/timer.c | 17 ++++++ arch/arm/include/asm/arch-imx/cpu.h | 2 + arch/arm/include/asm/arch-mx5/sys_proto.h | 1 - arch/arm/include/asm/arch-mx6/crm_regs.h | 2 + arch/arm/include/asm/arch-mx6/imx-regs.h | 4 ++ arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 10 ++++ board/boundary/nitrogen6x/nitrogen6x.c | 1 + board/freescale/common/pfuze.c | 38 +++++++++++++ board/freescale/common/pfuze.h | 1 + board/freescale/mx25pdk/mx25pdk.c | 4 +- board/freescale/mx53loco/mx53loco.c | 16 ------ board/freescale/mx6qsabreauto/mx6qsabreauto.c | 6 +++ board/freescale/mx6sabresd/mx6sabresd.c | 6 ++- board/freescale/mx6slevk/mx6slevk.c | 49 ++++++++++++++++- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 6 ++- board/tbs/tbs2910/tbs2910.c | 28 +++++----- board/warp/Kconfig | 12 +++++ board/warp/MAINTAINERS | 6 +++ board/warp/Makefile | 8 +++ board/warp/warp.c | 119 +++++++++++++++++++++++++++++++++++++++++ common/cmd_eeprom.c | 6 +++ configs/warp_defconfig | 3 ++ doc/README.fsl-esdhc | 1 + doc/README.mxc_hab | 48 +++++++++++++++++ drivers/crypto/fsl/Makefile | 2 +- drivers/crypto/fsl/desc.h | 15 ++++++ drivers/crypto/fsl/fsl_blob.c | 52 ++++++++++++++++++ drivers/crypto/fsl/jobdesc.c | 149 ++++++++++++++++++++++++++++++++++++++++++++++++++- drivers/crypto/fsl/jobdesc.h | 14 +++++ drivers/crypto/fsl/jr.c | 31 +++++++++-- drivers/mmc/fsl_esdhc.c | 33 +++++++++--- include/configs/mx53loco.h | 2 + include/configs/mx6sabre_common.h | 16 ++++++ include/configs/mx6slevk.h | 12 +++++ include/configs/ot1200.h | 10 ++++ include/configs/tbs2910.h | 13 +++++ include/configs/warp.h | 228 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ include/fsl_esdhc.h | 2 + include/fsl_sec.h | 78 +++++++++++++++++++++++++-- include/mc34704.h | 1 + include/mmc.h | 1 + include/power/pfuze100_pmic.h | 2 + 52 files changed, 1196 insertions(+), 52 deletions(-) create mode 100644 arch/arm/cpu/arm1136/mx31/relocate.S create mode 100644 arch/arm/cpu/arm1136/mx35/relocate.S create mode 100644 arch/arm/imx-common/cmd_dek.c create mode 100644 board/warp/Kconfig create mode 100644 board/warp/MAINTAINERS create mode 100644 board/warp/Makefile create mode 100644 board/warp/warp.c create mode 100644 configs/warp_defconfig create mode 100644 include/configs/warp.h
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
Quoted 10 lines · Stefano Babic
Hi Tom,
please pull from u-boot-imx, thanks !
The following changes since commit
1606b34aa50804227806971dbb6b82ea0bf81f55:Merge branch 'master' of
git://git.denx.de/u-boot-fsl-qoriq
(2015-02-25 18:14:18 -0500)
Quoted 9 lines
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.gitmasterfor you to fetch changes up to
32df39c741788e8637cffe6633d73594b26d70fb:mx5: fix
get_reset_cause(2015-03-05 10:29:27 +0100)
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150305/a95f8d97/attachment.sig>