Skip to contentSkip to conversation

Virus Attack & String Matching

DISCUSSION [email protected] 2 participants 2 messages Aug 6, 2004

lore
Share & tools
lore
#0 lore raw

Hello,

I've recently had to setup string matching to save a sever that was the subject of a virus DDOS attack, two of the domains on the server were recieving thousands of HTTP Get requests. After setting up a limit rule to slow it down and patch the kernel, I setup a filter like this:

iptables -I INPUT -p tcp -d DEST_IP --dport -m string --string "GET /1.jpg" -j DROP
iptables -I INPUT -p tcp -d DEST_IP --dport -m string --string "GET /get.php" -j DROP

Which dropped the traffic but caused Apache to generate 408 errors for every connection that was made. First question, is there a better or alternate way to do this? I've read people have recommended against string matching before but never found a good alternative. Second, is there a way I can have IP tables on a match insert a DROP rule for the source IP address? I wrote a script which did this based out of -j LOG output but would rather have it run everything automagically.

Regards,

Erik

#1 lore raw

Hi Erik,

You can use mod_security, http://www.modsecurity.org/,
to match strings and drop packets for your Apache web server.

An option is to use Iptables for rate limiting and mod_security for string matching and http deny.

This is my tatic, would be keen to hear of any better techniques.

HTH

Kind regards,
Rudi.

Quoted 27 lines · [email protected] wrote:

Hello,

I've recently had to setup string matching to save a sever that was the subject of a virus DDOS attack, two of the domains on the server were recieving thousands of HTTP Get requests. After setting up a limit rule to slow it down and patch the kernel, I setup a filter like this:

iptables -I INPUT -p tcp -d DEST_IP --dport -m string --string "GET /1.jpg" -j DROP
iptables -I INPUT -p tcp -d DEST_IP --dport -m string --string "GET /get.php" -j DROP

Which dropped the traffic but caused Apache to generate 408 errors for every connection that was made. First question, is there a better or alternate way to do this? I've read people have recommended against string matching before but never found a good alternative. Second, is there a way I can have IP tables on a match insert a DROP rule for the source IP address? I wrote a script which did this based out of -j LOG output but would rather have it run everything automagically.

Regards,

Erik

Signature · 4 lines
Regards,
Rudi.

Internet Media Productions