Skip to contentSkip to conversation

IAD Register is yet readable trough iad sys file. Fix snprintf (%u for unsigned, count for max size).

PATCH In review Julien Folly 2 participants 2 messages Sep 10, 2018 W1 dallas's 1-wire bus

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 IAD Register is yet readable trough iad sys file. Fix snprintf (%u for unsigned, count for max size).

---
 drivers/w1/slaves/w1_ds2438.c | 66 ++++++++++++++++++++++++++++++++++---------
 1 file changed, 52 insertions(+), 14 deletions(-)
drivers/w1/slaves/w1_ds2438.c +52 -14
index bf641a1..7c4e33d 100644
@@ -186,8 +186,8 @@ static int w1_ds2438_change_config_bit(struct w1_slave *sl, u8 mask, u8 value)
 	return -1;
 }
 
-static uint16_t w1_ds2438_get_voltage(struct w1_slave *sl,
-				      int adc_input, uint16_t *voltage)
+static int w1_ds2438_get_voltage(struct w1_slave *sl,
+				 int adc_input, uint16_t *voltage)
 {
 	unsigned int retries = W1_DS2438_RETRIES;
 	u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/];
@@ -235,6 +235,25 @@ static uint16_t w1_ds2438_get_voltage(struct w1_slave *sl,
 	return ret;
 }
 
+static int w1_ds2438_get_current(struct w1_slave *sl, int16_t *voltage)
+{
+	u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/];
+	int ret;
+
+	mutex_lock(&sl->master->bus_mutex);
+
+	if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) {
+		/* The voltage measured across current sense resistor RSENS. */
+		*voltage = (((int16_t) w1_buf[DS2438_CURRENT_MSB]) << 8) | ((int16_t) w1_buf[DS2438_CURRENT_LSB]);
+		ret = 0;
+	} else
+		ret = -1;
+
+	mutex_unlock(&sl->master->bus_mutex);
+
+	return ret;
+}
+
 static ssize_t iad_write(struct file *filp, struct kobject *kobj,
 			 struct bin_attribute *bin_attr, char *buf,
 			 loff_t off, size_t count)
@@ -257,6 +276,27 @@ static ssize_t iad_write(struct file *filp, struct kobject *kobj,
 	return ret;
 }
 
+static ssize_t iad_read(struct file *filp, struct kobject *kobj,
+			struct bin_attribute *bin_attr, char *buf,
+			loff_t off, size_t count)
+{
+	struct w1_slave *sl = kobj_to_w1_slave(kobj);
+	int ret;
+	int16_t voltage;
+
+	if (off != 0)
+		return 0;
+	if (!buf)
+		return -EINVAL;
+
+	if (w1_ds2438_get_current(sl, &voltage) == 0) {
+		ret = snprintf(buf, count, "%i\n", voltage);
+	} else
+		ret = -EIO;
+
+	return ret;
+}
+
 static ssize_t page0_read(struct file *filp, struct kobject *kobj,
 			  struct bin_attribute *bin_attr, char *buf,
 			  loff_t off, size_t count)
@@ -272,9 +312,13 @@ static ssize_t page0_read(struct file *filp, struct kobject *kobj,
 
 	mutex_lock(&sl->master->bus_mutex);
 
+	/* Read no more than page0 size */
+	if (count > DS2438_PAGE_SIZE)
+		count = DS2438_PAGE_SIZE;
+
 	if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) {
-		memcpy(buf, &w1_buf, DS2438_PAGE_SIZE);
-		ret = DS2438_PAGE_SIZE;
+		memcpy(buf, &w1_buf, count);
+		ret = count;
 	} else
 		ret = -EIO;
 
@@ -289,7 +333,6 @@ static ssize_t temperature_read(struct file *filp, struct kobject *kobj,
 {
 	struct w1_slave *sl = kobj_to_w1_slave(kobj);
 	int ret;
-	ssize_t c = PAGE_SIZE;
 	int16_t temp;
 
 	if (off != 0)
@@ -298,8 +341,7 @@ static ssize_t temperature_read(struct file *filp, struct kobject *kobj,
 		return -EINVAL;
 
 	if (w1_ds2438_get_temperature(sl, &temp) == 0) {
-		c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", temp);
-		ret = PAGE_SIZE - c;
+		ret = snprintf(buf, count, "%i\n", temp);
 	} else
 		ret = -EIO;
 
@@ -312,7 +354,6 @@ static ssize_t vad_read(struct file *filp, struct kobject *kobj,
 {
 	struct w1_slave *sl = kobj_to_w1_slave(kobj);
 	int ret;
-	ssize_t c = PAGE_SIZE;
 	uint16_t voltage;
 
 	if (off != 0)
@@ -321,8 +362,7 @@ static ssize_t vad_read(struct file *filp, struct kobject *kobj,
 		return -EINVAL;
 
 	if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VAD, &voltage) == 0) {
-		c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", voltage);
-		ret = PAGE_SIZE - c;
+		ret = snprintf(buf, count, "%u\n", voltage);
 	} else
 		ret = -EIO;
 
@@ -335,7 +375,6 @@ static ssize_t vdd_read(struct file *filp, struct kobject *kobj,
 {
 	struct w1_slave *sl = kobj_to_w1_slave(kobj);
 	int ret;
-	ssize_t c = PAGE_SIZE;
 	uint16_t voltage;
 
 	if (off != 0)
@@ -344,15 +383,14 @@ static ssize_t vdd_read(struct file *filp, struct kobject *kobj,
 		return -EINVAL;
 
 	if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VDD, &voltage) == 0) {
-		c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", voltage);
-		ret = PAGE_SIZE - c;
+		ret = snprintf(buf, count, "%u\n", voltage);
 	} else
 		ret = -EIO;
 
 	return ret;
 }
 
-static BIN_ATTR(iad, S_IRUGO | S_IWUSR | S_IWGRP, NULL, iad_write, 1);
+static BIN_ATTR(iad, S_IRUGO | S_IWUSR | S_IWGRP, iad_read, iad_write, 0);
 static BIN_ATTR_RO(page0, DS2438_PAGE_SIZE);
 static BIN_ATTR_RO(temperature, 0/* real length varies */);
 static BIN_ATTR_RO(vad, 0/* real length varies */);
Signature · 1 line
2.7.4
#1 lore raw
Quoted 6 lines · Julien Folly
---
 drivers/w1/slaves/w1_ds2438.c | 66 ++++++++++++++++++++++++++++++++++---------
 1 file changed, 52 insertions(+), 14 deletions(-)

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree.

You are receiving this message because of the following common error(s) as indicated below:

- You did not specify a description of why the patch is needed, or possibly, any description at all, in the email body. Please read the section entitled "The canonical patch format" in the kernel file, Documentation/SubmittingPatches for what is needed in order to properly describe the change.

- You did not write a descriptive Subject: for the patch, allowing Greg, and everyone else, to know what this patch is all about. Please read the section entitled "The canonical patch format" in the kernel file, Documentation/SubmittingPatches for what a proper Subject: line should look like.

If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers.

thanks,

greg k-h's patch email bot