Skip to contentSkip to conversation

Xilinx patches for v2019.04

GIT PULL Michal Simek 2 participants 2 messages Apr 17, 2019 – Apr 18, 2019

lore
Share & tools
lore
#0 lore raw

Hi Tom,

I am sending you some patches related to Xilinx devices and fpga framework. There are minimal changes in xilinx drivers and one patch which fixes EXT_DTB usage reviewed by Simon.

Builds look good.
https://travis-ci.org/michalsimek/u-boot/builds/520747035

Thanks,
Michal

The following changes since commit 216800acf1fbf9f498455bf3c92d4513d9a4c681:

Merge branch 'master' of git://git.denx.de/u-boot-spi (2019-04-14
00:03:06 -0400)

are available in the git repository at:

git://www.denx.de/git/u-boot-microblaze.git tags/xilinx-for-v2019.07

for you to fetch changes up to 350cfe79a8fb288e9066d5668af7c5ab6857edea:

arm64: zynqmp: fix preprocessor check for SPL_ZYNQMP_TWO_SDHCI
(2019-04-16 11:52:02 +0200)

----------------------------------------------------------------
Xilinx/FPGA changes for v2019.07

fpga:
- Add support for external data in FIT
- Extend testing for external data case
- Inform user about a need to run post config on Zynq

arm:
- Tune zynq command functions
- Fix internal variable setting

arm64:
- Add support for zc39dr decoding
- Disable WDT for zcu100
- Small changes in reset_reason()
- Some DT changes (spi)
- Tune qspi-mini configuration
- Remove useless eeprom setting
- Fix two sdhci boot case

spi:
- Fix tap delay programming

clk:
- Enable i2c in SPL

net:
- Fix gem phydev handling
- Remove phy detection code from gem driver

general:
- Correct EXT_DTB usage for MULTI_DTB_FIT configuration

----------------------------------------------------------------
Hannes Schmelzer (1):
ARM: zynq: Add missing i2c get_rate for fixing i2c SPL

Luca Ceresoli (1):
arm64: zynqmp: fix preprocessor check for SPL_ZYNQMP_TWO_SDHCI

Melin Tomas (1):
ARM: zynq: fix environment command syntax

Michal Simek (6):
test: py: Extend fpga test with fit image with external data
arm64: zynqmp: Disable WDT for zcu100
arm64: zynqmp: Add debug message about clearing BSS
Makefile: Prioritize external dtb if defined
net: gem: Remove phy autodetection code
arm64: zynqmp: Remove eeprom setting

Siva Durga Prasad Paladugu (7):
spi: zynqmp_gqspi: Fix tap delay values at 100MHz and 150MHz
arm64: zynqmp: Add spi-flash compatible string to flash node
arm64: zynqmp: Define label for flash node
arm64: xilinx: zynqmp: Remove unneeded configs
arm64: zynqmp: Add idcode for new RFSoC silicon ZU39DR
arm: zynq: Add an info message about post config
net: zynq_gem: Modify phy supported features after max-speed was set

T Karthik Reddy (2):
arm64: zynqmp: Use zynqmp_mmio_read/write functions
ARM: zynq: Check zynq aes & rsa command parameters count

Tien Fong Chee (2):
fpga: Add support for getting external data address and length
fpga: Replace char * with const char * for filename

 Makefile                                    |  5 +++++
 arch/arm/dts/zynqmp-mini-qspi.dts           |  4 ++--
 arch/arm/mach-zynqmp/spl.c                  |  3 ++-
 board/xilinx/zynq/cmds.c                    |  9 ++++++++-
 board/xilinx/zynqmp/zynqmp.c                | 20 ++++++++++++++------
 cmd/fpga.c                                  |  6 +++---
 configs/xilinx_zynqmp_mini_qspi_defconfig   |  2 ++
 configs/xilinx_zynqmp_zcu100_revC_defconfig |  2 --
 drivers/clk/clk_zynq.c                      |  2 ++
 drivers/fpga/zynqpl.c                       |  5 ++++-
 drivers/net/zynq_gem.c                      | 53
+++--------------------------------------------------
 drivers/spi/zynqmp_gqspi.c                  |  4 ++--
 include/configs/xilinx_zynqmp.h             |  9 ---------
 include/configs/zynq-common.h               |  8 ++++----
 include/fpga.h                              |  2 +-
 test/py/tests/test_fpga.py                  | 13 +++++++++++++
 16 files changed, 65 insertions(+), 82 deletions(-)
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190417/c2a19efb/attachment.sig>
#1 lore raw
Quoted 21 lines · Michal Simek

Hi Tom,

I am sending you some patches related to Xilinx devices and fpga framework. There are minimal changes in xilinx drivers and one patch which fixes EXT_DTB usage reviewed by Simon.

Builds look good.
https://travis-ci.org/michalsimek/u-boot/builds/520747035

Thanks,
Michal

The following changes since commit 216800acf1fbf9f498455bf3c92d4513d9a4c681:

Merge branch 'master' of git://git.denx.de/u-boot-spi (2019-04-14
00:03:06 -0400)

are available in the git repository at:

Quoted 7 lines

git://www.denx.de/git/u-boot-microblaze.git tags/xilinx-for-v2019.07

for you to fetch changes up to 350cfe79a8fb288e9066d5668af7c5ab6857edea:

arm64: zynqmp: fix preprocessor check for SPL_ZYNQMP_TWO_SDHCI
(2019-04-16 11:52:02 +0200)

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190418/73ec3888/attachment.sig>