nfsroot protocol version
Subsystems (2)
Hello everyone,
My embedded system is supposed to mount the rootfs via NFS.
https://www.kernel.org/doc/Documentation/filesystems/nfs/nfsroot.txt
So I set these options in my kernel .config
CONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_ROOT_NFS=yCONFIG_NFS_V4=y
But it didn't work, the system would panic after a long time out (around 95 seconds)
[ 98.567037] VFS: Unable to mount root fs via NFS, trying floppy. [ 98.573238] Freeing unused kernel memory: 144K (c0332000 - c0356000) [ 98.579698] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
I then enabled NFSv2 and NFSv3, and then it worked.
When I was debugging the problem, I ran across NFS_DEF_OPTIONS in fs/nfs/nfsroot.c
#define NFS_DEF_OPTIONS "vers=2,udp,rsize=4096,wsize=4096"
IIUC, we are explicitly requesting NFSv2?
Would that explain why it fails when NFSv2 support is not compiled in?
Would it make sense to use version 3?
(So NFSv2 is not needed just to load the rootfs.)
Regards.
Hello,
Quoted 23 lines · Mason
My embedded system is supposed to mount the rootfs via NFS.
https://www.kernel.org/doc/Documentation/filesystems/nfs/nfsroot.txtSo I set these options in my kernel .config
CONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_ROOT_NFS=yCONFIG_NFS_V4=yBut it didn't work, the system would panic after a long time out (around 95 seconds)
[ 98.567037] VFS: Unable to mount root fs via NFS, trying floppy. [ 98.573238] Freeing unused kernel memory: 144K (c0332000 - c0356000) [ 98.579698] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.I then enabled NFSv2 and NFSv3, and then it worked.
When I was debugging the problem, I ran across
NFS_DEF_OPTIONSinfs/nfs/nfsroot.c
Quoted 8 lines
#define
NFS_DEF_OPTIONS"vers=2,udp,rsize=4096,wsize=4096"IIUC, we are explicitly requesting NFSv2?
Would that explain why it fails when NFSv2 support is not compiled in?
Would it make sense to use version 3?
(So NFSv2 is not needed just to load the rootfs.)
I saw commit 4251c94833aa (NFS: Revert NFSROOT default mount options) which states:
Last fall we removed the ad hoc mount option parser in fs/nfs/nfsroot.c in favor of using the main parser in fs/nfs/super.c (see commit 56463e50 "NFS: Use super.c for NFSROOT mount option parsing"). That commit changed the default NFSROOT mount options to be the same as those employed by user space mounts.
As it turns out, these new default mount options are not tolerated by many embedded systems. So far these problems have been due to specific behavior of certain embedded NICs. The NFS community does not have such hardware on hand for running tests.
Commit 53d47375 recently introduced a clean way to specify default mount options for NFSROOT, so we can now easily restore the traditional defaults for NFSROOT:
vers=2,udp,rsize=4096,wsize=4096
This should revert the new default NFSROOT mount options introduced with commit 56463e50.
I guess this explains why vers=3 is not the default?
I'm now wondering how to override the mount options on the boot command line. Looking more closely at commit 53d473758053 (NFS: NFSROOT should default to "proto=udp") nothing jumps out at me.
My current boot command line is
"root=/dev/nfs ip=:::::eth0:dhcp rdinit=/none console=ttyS0,115200 mem=512M earlyprintk"
Looking at the documentation
https://www.kernel.org/doc/Documentation/filesystems/nfs/nfsroot.txt
I don't see where the protocol version is specified.
Where am I supposed to add the vers=3 option?
Regards.
Quoted 61 lines · Mason
Hello,
Quoted 23 lines · Mason
My embedded system is supposed to mount the rootfs via NFS.
https://www.kernel.org/doc/Documentation/filesystems/nfs/nfsroot.txtSo I set these options in my kernel .config
CONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_ROOT_NFS=yCONFIG_NFS_V4=yBut it didn't work, the system would panic after a long time out (around 95 seconds)
[ 98.567037] VFS: Unable to mount root fs via NFS, trying floppy. [ 98.573238] Freeing unused kernel memory: 144K (c0332000 - c0356000) [ 98.579698] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.I then enabled NFSv2 and NFSv3, and then it worked.
When I was debugging the problem, I ran across
NFS_DEF_OPTIONSinfs/nfs/nfsroot.cQuoted 8 lines
#define
NFS_DEF_OPTIONS"vers=2,udp,rsize=4096,wsize=4096"IIUC, we are explicitly requesting NFSv2?
Would that explain why it fails when NFSv2 support is not compiled in?
Would it make sense to use version 3?
(So NFSv2 is not needed just to load the rootfs.)I saw commit
4251c94833aa(NFS: Revert NFSROOT default mount options) which states:Last fall we removed the ad hoc mount option parser in
fs/nfs/nfsroot.cin favor of using the main parser infs/nfs/super.c(see commit56463e50"NFS: Usesuper.cfor NFSROOT mount option parsing"). That commit changed the default NFSROOT mount options to be the same as those employed by user space mounts.
As it turns out, these new default mount options are not tolerated by
many embedded systems. So far these problems have been due to specific behavior of certain embedded NICs. The NFS community does not have such hardware on hand for running tests.
Commit53d47375recently introduced a clean way to specify default
mount options for NFSROOT, so we can now easily restore the traditional defaults for NFSROOT:
vers=2,udp,rsize=4096,wsize=4096
This should revert the new default NFSROOT mount options introduced
with commit56463e50.I guess this explains why vers=3 is not the default?
I'm now wondering how to override the mount options on the boot command line. Looking more closely at commit
53d473758053(NFS: NFSROOT should default to "proto=udp") nothing jumps out at me.
Quoted 8 lines
My current boot command line is
"root=/dev/nfs ip=:::::eth0:dhcp rdinit=/none console=ttyS0,115200 mem=512M earlyprintk"Looking at the documentation
https://www.kernel.org/doc/Documentation/filesystems/nfs/nfsroot.txt
I don't see where the protocol version is specified.Where am I supposed to add the vers=3 option?
Let’s try that again.
Specifying “vers=3” in the nfs-options section of the nfsroot= boot parameter should work.
--
Chuck Lever
chuck[dot]lever[at]oracle[dot]com
Hello Chuck,
Quoted 70 lines · Chuck Lever
Quoted 68 lines · Mason
Hello,
Quoted 23 lines · Mason
My embedded system is supposed to mount the rootfs via NFS.
https://www.kernel.org/doc/Documentation/filesystems/nfs/nfsroot.txtSo I set these options in my kernel .config
CONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_ROOT_NFS=yCONFIG_NFS_V4=yBut it didn't work, the system would panic after a long time out (around 95 seconds)
[ 98.567037] VFS: Unable to mount root fs via NFS, trying floppy. [ 98.573238] Freeing unused kernel memory: 144K (c0332000 - c0356000) [ 98.579698] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.I then enabled NFSv2 and NFSv3, and then it worked.
When I was debugging the problem, I ran across
NFS_DEF_OPTIONSinfs/nfs/nfsroot.cQuoted 8 lines
#define
NFS_DEF_OPTIONS"vers=2,udp,rsize=4096,wsize=4096"IIUC, we are explicitly requesting NFSv2?
Would that explain why it fails when NFSv2 support is not compiled in?
Would it make sense to use version 3?
(So NFSv2 is not needed just to load the rootfs.)I saw commit
4251c94833aa(NFS: Revert NFSROOT default mount options) which states:Last fall we removed the ad hoc mount option parser in
fs/nfs/nfsroot.cin favor of using the main parser infs/nfs/super.c(see commit56463e50"NFS: Usesuper.cfor NFSROOT mount option parsing"). That commit changed the default NFSROOT mount options to be the same as those employed by user space mounts.
As it turns out, these new default mount options are not tolerated by
many embedded systems. So far these problems have been due to specific behavior of certain embedded NICs. The NFS community does not have such hardware on hand for running tests.
Commit53d47375recently introduced a clean way to specify default
mount options for NFSROOT, so we can now easily restore the traditional defaults for NFSROOT:
vers=2,udp,rsize=4096,wsize=4096
This should revert the new default NFSROOT mount options introduced
with commit56463e50.I guess this explains why vers=3 is not the default?
I'm now wondering how to override the mount options on the boot command line. Looking more closely at commit
53d473758053(NFS: NFSROOT should default to "proto=udp") nothing jumps out at me.My current boot command line is
"root=/dev/nfs ip=:::::eth0:dhcp rdinit=/none console=ttyS0,115200 mem=512M earlyprintk"Looking at the documentation
https://www.kernel.org/doc/Documentation/filesystems/nfs/nfsroot.txt
I don't see where the protocol version is specified.
Quoted 6 lines
Quoted 1 line
Where am I supposed to add the vers=3 option?
Let's try that again.
Specifying “vers=3” in the nfs-options section of the nfsroot= boot parameter should work.
Hmmm, I don't have nfsroot= in my boot command line. nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>]
In U-Boot, DHCP sets a root-path environment variable to "172.27.64.1:/export/roots/6_2_0_8756"
Is root-path an alias for nfsroot?
I tried
root-path = "172.27.64.1:/export/roots/6_2_0_8756,vers=3" root-path = "172.27.64.1:/export/roots/6_2_0_8756,v3" (second form suggested in the link below)
but neither worked :-(
This page mentions root-path
http://developer.toradex.com/software-resources/arm-family/linux/linux-booting
option root-path "192.168.10.1:/srv/nfs/rootfs,wsize=1024,rsize=1024,v3";
Regards.
Quoted 76 lines · Mason
Hello Chuck,
Quoted 72 lines · Chuck Lever
Quoted 69 lines · Mason
Hello,
Quoted 23 lines · Mason
My embedded system is supposed to mount the rootfs via NFS.
https://www.kernel.org/doc/Documentation/filesystems/nfs/nfsroot.txtSo I set these options in my kernel .config
CONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_ROOT_NFS=yCONFIG_NFS_V4=yBut it didn't work, the system would panic after a long time out (around 95 seconds)
[ 98.567037] VFS: Unable to mount root fs via NFS, trying floppy. [ 98.573238] Freeing unused kernel memory: 144K (c0332000 - c0356000) [ 98.579698] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.I then enabled NFSv2 and NFSv3, and then it worked.
When I was debugging the problem, I ran across
NFS_DEF_OPTIONSinfs/nfs/nfsroot.cQuoted 8 lines
#define
NFS_DEF_OPTIONS"vers=2,udp,rsize=4096,wsize=4096"IIUC, we are explicitly requesting NFSv2?
Would that explain why it fails when NFSv2 support is not compiled in?
Would it make sense to use version 3?
(So NFSv2 is not needed just to load the rootfs.)I saw commit
4251c94833aa(NFS: Revert NFSROOT default mount options) which states:Last fall we removed the ad hoc mount option parser in
fs/nfs/nfsroot.cin favor of using the main parser infs/nfs/super.c(see commit56463e50"NFS: Usesuper.cfor NFSROOT mount option parsing"). That commit changed the default NFSROOT mount options to be the same as those employed by user space mounts.
As it turns out, these new default mount options are not tolerated by
many embedded systems. So far these problems have been due to specific behavior of certain embedded NICs. The NFS community does not have such hardware on hand for running tests.
Commit53d47375recently introduced a clean way to specify default
mount options for NFSROOT, so we can now easily restore the traditional defaults for NFSROOT:
vers=2,udp,rsize=4096,wsize=4096
This should revert the new default NFSROOT mount options introduced
with commit56463e50.I guess this explains why vers=3 is not the default?
I'm now wondering how to override the mount options on the boot command line. Looking more closely at commit
53d473758053(NFS: NFSROOT should default to "proto=udp") nothing jumps out at me.My current boot command line is
"root=/dev/nfs ip=:::::eth0:dhcp rdinit=/none console=ttyS0,115200 mem=512M earlyprintk"Looking at the documentation
https://www.kernel.org/doc/Documentation/filesystems/nfs/nfsroot.txt
I don't see where the protocol version is specified.Where am I supposed to add the vers=3 option?
Quoted 7 lines
Quoted 4 lines
Let's try that again.
Specifying “vers=3” in the nfs-options section of the nfsroot= boot parameter should work.
Hmmm, I don't have nfsroot= in my boot command line. nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>]
nfsroot= is the way that NFSROOT mount options are specified. Without that kernel boot parameter, NFSROOT won’t work.
Quoted 4 lines
In U-Boot, DHCP sets a root-path environment variable to "172.27.64.1:/export/roots/6_2_0_8756"
Is root-path an alias for nfsroot?
RFC 2132 Section 3.19 defines Root Path as option 17, which provides a DHCP client with the location of it’s root disk.
root-path is the API on your DHCP server that lets you specify the contents of option 17. DHCP clients use the contents of option 17 to construct a kernel boot command line.
Quoted 9 lines
I tried
root-path = "172.27.64.1:/export/roots/6_2_0_8756,vers=3" root-path = "172.27.64.1:/export/roots/6_2_0_8756,v3" (second form suggested in the link below)
but neither worked :-(This page mentions root-path
http://developer.toradex.com/software-resources/arm-family/linux/linux-booting
option root-path "192.168.10.1:/srv/nfs/rootfs,wsize=1024,rsize=1024,v3”;
You might have better luck with this:
http://wiki.emacinc.com/wiki/Booting_with_an_NFS_Root_Filesystem
It explains how to specify client kernel boot commandline parameters on your DHCP server that will make NFSROOT work.
--
Chuck Lever
chuck[dot]lever[at]oracle[dot]com
Quoted 6 lines · Chuck Lever
You might have better luck with this:
http://wiki.emacinc.com/wiki/Booting_with_an_NFS_Root_Filesystem
It explains how to specify client kernel boot commandline parameters on your DHCP server that will make NFSROOT work.
Hello Chuck,
Thanks to you, it now works.
At first, I had mistakenly assumed U-boot was somehow passing the root-path variable to Linux, but, in fact, Linux gets it from the DHCP server (just like U-boot does).
Thus, if I set my boot command line to:
ip=dhcp root=/dev/nfs rdinit=/none console=ttyS0,115200 mem=640M
and if I change my DHCP server configuration to:
option root-path "172.27.64.1:/export/roots/6_2_0_8756,v3";
then everything works as expected, and my kernel no longer needs to supportNFSv2.
Regards.