Documentation: blackfin: gptimers-example: Use new switch macro SAMPLE_IRQ_TIMER instead of IRQ_TIMER5
PATCH 1/1 Documentation: blackfin: gptimers-example: Use new switch macro SAMPLE_IRQ_TIMER instead of IRQ_TIMER5
In reply to a message not in the archiveNot all blackfin machines support IRQ_TIMER5, but all machines support IRQ_TIMER2. So add a switch macro for them. The related error:
Documentation/blackfin/gptimers-example.c: In function 'gptimer_example_init':
Documentation/blackfin/gptimers-example.c:60:20: error: 'IRQ_TIMER5' undeclared (first use in this function)
ret = request_irq(IRQ_TIMER5, gptimer_example_irq, IRQF_SHARED, DRIVER_NAME, &data);
^
Documentation/blackfin/gptimers-example.c:60:20: note: each undeclared identifier is reported only once for each function it appears in
Documentation/blackfin/gptimers-example.c: In function 'gptimer_example_exit':
Documentation/blackfin/gptimers-example.c:78:11: error: 'IRQ_TIMER5' undeclared (first use in this function)
free_irq(IRQ_TIMER5, &data);
^Also notice about 80 columns limitation.
--- Documentation/blackfin/gptimers-example.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
Documentation/blackfin/gptimers-example.c +11 -3
@@ -17,6 +17,12 @@#define DRIVER_NAME "gptimer_example" +#ifdef IRQ_TIMER5 +#define SAMPLE_IRQ_TIMER IRQ_TIMER5 +#else +#define SAMPLE_IRQ_TIMER IRQ_TIMER2 +#endif +struct gptimer_data {uint32_t period, width; };
@@ -57,7 +63,8 @@ static int __init gptimer_example_init(void) }/* grab the IRQ for the timer */ - ret =request_irq (IRQ_TIMER5 , gptimer_example_irq,IRQF_SHARED ,DRIVER_NAME , &data); + ret =request_irq (SAMPLE_IRQ_TIMER , gptimer_example_irq, +IRQF_SHARED ,DRIVER_NAME , &data);if (ret) { printk(KERN_NOTICE DRIVER_NAME ": IRQ request failed\n");peripheral_free (P_TMR5 );
@@ -65,7 +72,8 @@ static int __init gptimer_example_init(void) }/* setup the timer and enable it */ -set_gptimer_config (TIMER5_id,WDTH_CAP |PULSE_HI |PERIOD_CNT |IRQ_ENA ); +set_gptimer_config (TIMER5_id, +WDTH_CAP |PULSE_HI |PERIOD_CNT |IRQ_ENA );enable_gptimers (TIMER5bit);return 0 ;
@@ -75,7 +83,7 @@ module_init(gptimer_example_init); static void __exit gptimer_example_exit(void) {disable_gptimers (TIMER5bit); -free_irq (IRQ_TIMER5 , &data); +free_irq (SAMPLE_IRQ_TIMER , &data);peripheral_free (P_TMR5 ); }module_exit (gptimer_example_exit);
Signature · 1 line
1.9.3
Jonathan Corbet
maintainerQuoted 2 lines · On Sun, 5 Apr 2015 12:25:44 +0800 Chen Gang <[email protected]> wrote:
Not all blackfin machines support
IRQ_TIMER5, but all machines supportIRQ_TIMER2.
I don't know enough about Blackfin to judge whether to take this into the docs tree or not in the absence of a relevant ack. Perhaps one could be forthcoming?
It would also be nice to move this program into tools/ at some point.
Thanks,
jon
Quoted 10 lines · Jonathan Corbet
Quoted 2 lines · On Sun, 5 Apr 2015 12:25:44 +0800 Chen Gang <[email protected]> wrote:
Not all blackfin machines support
IRQ_TIMER5, but all machines supportIRQ_TIMER2.I don't know enough about Blackfin to judge whether to take this into the docs tree or not in the absence of a relevant ack. Perhaps one could be forthcoming?
Welcome any blackfin related members' ideas.
Quoted 2 lines
It would also be nice to move this program into
tools/at some point.
For me, I still suggest to let it in Documentation.
- Documentation can accept ".c" files.
- The code is simple, it is mainly as an sample/template for developers, not mainly for real world using (tools is mainly for real world using, not mainly as an sample for developers).
Thanks.
Signature · 3 lines
Chen Gang Open, share, and attitude like air, water, and life which God blessed
Jonathan Corbet
maintainerQuoted 2 lines · On Sun, 5 Apr 2015 12:25:44 +0800 Chen Gang <[email protected]> wrote:
Not all blackfin machines support
IRQ_TIMER5, but all machines supportIRQ_TIMER2. So add a switch macro for them.
OK, I've (finally) applied this to the docs tree.
Thanks,
jon
Quoted 8 lines · Jonathan Corbet
Quoted 2 lines · On Sun, 5 Apr 2015 12:25:44 +0800 Chen Gang <[email protected]> wrote:
Not all blackfin machines support
IRQ_TIMER5, but all machines supportIRQ_TIMER2. So add a switch macro for them.OK, I've (finally) applied this to the docs tree.
OK, thank you for your work.
And within this month, I shall try to send patches to be sure of all architectures have full syscalls.
Also sorry for sending kernel patches delayed during these days (also for blackfin gcc analyzing). The excuses are:
- I have no quite enough time resources on open source.
- During these days, I mainly focused on developing tilegx QEMU which I already delayed too much to bare.
I shall try to finish them all within this month.
Thanks.
Signature · 3 lines
Chen Gang Open, share, and attitude like air, water, and life which God blessed