Skip to contentSkip to conversation

How to port a legacy device driver to a new Linux platform?

DISCUSSION heavenscape (sent by Nabble.com) 2 participants 2 messages Jul 28, 2006 – Jul 30, 2006

lore
Share & tools
lore
#0 lore raw

Hi all,

I have a legacy PCI fiber card running under Red Hat Linux 7.3, and I have all the source code of its driver developped by others. Please see the attachment.

http://www.nabble.com/user-files/135/cyport71.tar cyport71.tar

It is working fine right now. But I am going to upgrade my OS to Rea Hat Enterprise Linux AS 4, I am not sure how can I recompile and install this fiber card in the new OS. I am new to Linux and have minimal experience in programming Linux. But this card is very important to me.

Any suggestion is highly appreciated!! Thanks!!

Mason

Signature · 2 lines
View this message in context: http://www.nabble.com/How-to-port-a-legacy-device-driver-to-a-new-Linux-platform--tf2014157.html#a5535638
Sent from the linux-kernel forum at Nabble.com.
#1 lore raw
Quoted 6 lines · heavenscape (sent by Nabble.com)

Hi all,

I have a legacy PCI fiber card running under Red Hat Linux 7.3, and I have all the source code of its driver developped by others. Please see the attachment.

Quoted 8 lines

http://www.nabble.com/user-files/135/cyport71.tar cyport71.tar

It is working fine right now. But I am going to upgrade my OS to Rea Hat Enterprise Linux AS 4, I am not sure how can I recompile and install this fiber card in the new OS. I am new to Linux and have minimal experience in programming Linux. But this card is very important to me.

Any suggestion is highly appreciated!! Thanks!!

You may do rework of the driver and post it: see Documentation/HOWTO, especially Documentation/SubmittingDrivers.

It won't be so hard, if you don't feel cool enough, I may try my best, but tell me the source (cvs?) address of the drivers. What kind of device is that?

regards,

Signature · 4 lines
<a href="http://www.fi.muni.cz/~xslaby/">Jiri Slaby</a>
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8  22A0 32CC 55C3 39D4 7A7E